大豆与豆豉中游离氨基酸总量测定

目的: 探讨大豆和经过发酵后的豆豉游离氨基酸总量的变化.方法: 采用氨基酸的游离氨基与水合茚三酮产生显色反应,在一定范围内,其颜色的深浅与氨基酸的含量成正比.结果: 波长570 nm处含氮量在0～5 μg吸收度值与含氮量值线性关系良好,r＝0.999 9(n＝5),且豆豉中游离氨基酸总量与大豆中游离氨基酸总量存在显著性差异.结论: 大豆在经过发酵后游离氨基酸总量产生明显变化,更易被人体所吸收,其营养价值更高.     

The expression of TRPA1 mRNA in the rat brain

Objective： To investigate the distribution of TRPA1 （one kind of the TRP-like ion channel family） channel in the hippocampus and cerebral cortex of rat. Methods： RT-PCR was used to amplify the fragment of TRPA1 in the DRG （dorsal root ganglion）, hippocampus and cerebral cortex of adult SD rat. In situ hybridization staining was used to show the distribution of TRPA1 mRNA in the hippocampus and cerebral cortex of adult rat brain. Results： Both RT-PCR and in situ hybridization staining showed that TRPA1 mRNA was expressed in hippocampus and cerebral cortex of the adult rat brain. Conclusion： Our results suggest that there is expression of TRPA1 mRNA both in the hippocampus and cerebral cortex of the adult rat brain.     

Glutamate receptors within the nucleus of solitary tract contribute to pancreatic secretion stimulated by intraduodenal hypertonic saline

High-speed counter-current chromatography （HSCCC） with a solvent system composed of ethyl acetate-n-buta- nol-water （2 ： 1 ： 3, V/V/V） was used to isolate and separate two C-glycosylflavones from Patrinia villosa Juss, a traditional Chinese medicine. The separation produced 42.9 mg isovitexin and 20.1 mg isoorientin with purities of 99.3% and 98.5%, respectively as determined by high-performance liquid chromatography （HPLC） in one step elution from 250 mg crude extract, and identification was performed by MS, ^1H NMR and ^13C NMR. It is the first report of discovering isovitexin and isoorientin from the plant of Patrinia genus.     

实验动物和脏器标本的摄影方法

文章结合实践介绍了实验动物和脏器标本的摄影方法及注意事项,为从事这方面工作的科技人员提供了技术支持。     

关于802.1X认证技术在校园网应用中问题的探讨

介绍了802.1X认证技术的体系结构和工作原理,分析了802.1X认证技术在校园网中应用的优势与不足.     

乌司他丁对原位肝移植术肺损伤的保护作用

目的:观察原位肝移植术(OLT)中肺损伤的程度,探讨乌司他丁(UTI)对OLT中肺损伤的保护作用.方法:40例择期行OLT手术患者随机分为UTI组和对照组各20例,UTI组(n=20)切皮后将UTI 100万单位加入100mL生理氯化钠溶液,持续静脉输注,之后每隔4 h重复使用.对照组(n=20)以等容量生理氯化钠溶液代替.于麻醉后切皮前、无肝前期120 min、无肝期30 min、新肝期10 min、新肝期60 min和术毕对肺顺应性、吸气阻力、呼气阻力、峰值压力和平台压力进行观察.结果:在新肝期10 min、新肝期60 min和术毕时,对照组的肺顺应性显著下降,吸气阻力、呼气阻力、峰值压力和平台压力显著升高(P<0.05).UTI组的吸气阻力、呼气阻力、峰值压力和平台压力值均明显低于对照组(P<0.05),而肺顺应性值明显高于对照组(P<0.05).结论:0LT过程造成肺损伤,UTI在OLT中对肺损伤有保护作用.     

中医药院校公共事业管理专业人才培养方案及课程体系科学化研究

为优化专业培养方案,使课程设置更加符合培养目标,采用文献分析、专家访谈、召开毕业生座谈会等方法,对中医药院校公共事业管理专业人才培养的总体思路、基本原则、培养目标和课程体系的科学化进行了研究,制定出医药经营管理、医疗保险、医院管理3个专业方向的本科学分制改革培养计划,并针对教学实践中存在的主要问题提出了相应的建议,为中医药院校公共事业管理专业的建设与发展提供参考.     

基于影像组学分类器术前预测直肠非黏液性腺癌淋巴结转移

目的：探讨影像组学方法在术前预测直肠非黏液性腺癌淋巴结转移中的价值。方法：回顾性分析91例手术病理切片证实为直肠非黏液性腺癌患者的影像学资料,其中61例为训练样本,30例为验证样本。基于全瘤体积,从每个原发病灶术前高分辨T2加权成像(T2-weighted imaging,T2WI)图像中提取影像组学特征1 301个。基于训练样本,利用最小绝对收缩和选择算子(the least absolute shrinkage and selection operator,LASSO)逻辑回归方法筛选关键特征并构建影像组学分类器。采用受试者工作特征(receiver operating characteristic,ROC)曲线评价影像组学分类器的辨别效能,并将其与形态学标准进行比较。在验证样本中验证影像组学分类器的价值。结果：由5个影像组学特征构建的分类器与淋巴结转移状态有关(P<0.001)。在训练样本和验证样本中,影像组学分类器诊断淋巴结转移的曲线下面积分别为0.874(95% CI：0.787~0.960)和0.878(95% CI：0.727~1.000),形态学标准诊断淋巴结转移的曲线下面积分别为0.619(95% CI：0.487~0.752)和0.556(95% CI：0.355~0.756)。无论是训练样本还是验证样本,影像组学分类器的诊断效能均高于形态学标准(均P<0.05)。结论：影像组学分类器可术前个体化预测直肠非黏液性腺癌淋巴结转移,而且其诊断效能高于形态学标准。     

患者对预检分诊服务满意度理论框架的扎根理论研究

目的 通过扎根理论研究构建患者视角的预检分诊服务满意度理论框架,为评估和量化患者对预检分诊服务的满意度提供参考。方法 采用目的抽样和理论抽样的方法,选择27例接受过预检分诊服务的患者进行半结构式深度访谈;运用程序化扎根理论的研究方法,采用NVIVO12.0软件辅助对原始数据进行开放式编码、主轴编码及选择性编码,并进行理论饱和度检验。结果 析出患者期望、服务质量、信息供给、人本关怀、持续改进5个主范畴。结论 5个主范畴分别构成预检分诊服务满意度的主体因素、核心因素、关键因素、基本因素和保障因素。该理论框架可为改善预检分诊服务、评估患者满意度提供参考。     

Preparation of rigid polyurethane foam from lignopolyol obtained through mild oxypropylation

Lignin, one of the main components of lignocellulose, can be used as an alternative to chemical polyols in the production of polyurethane because of its abundant phenolic and alcohol hydroxyls. Traditionally, lignin is directly applied in the preparation of polyurethane; however, modified lignin has been proved to be superior, especially that obtained by the oxypropylation reaction. Therefore, lignopolyol obtained by mild and efficient oxypropylation was utilized in the production of rigid polyurethane foam in this study. Specifically, the effects of the content of lignopolyol on the chemical structure, morphological structure, mechanical properties and thermal stability of the lignin-based rigid polyurethane foam were investigated. It was found that the compressive strength of the rigid polyurethane foam was significantly improved with the addition of lignopolyol compared with that of the pure polyurethane foam, which was attributed to the fact that oxypropylation made lignin into highly branched and functionalized polyols by transforming all phenolic hydroxyls into aliphatic hydroxyls. Moreover, when the molal weight of lignopolyol accounted for 40% of the added polyols, the generated foam showed optimal uniformity and regularity, and the compressive strength reached 0.18 MPa, meeting the requirements of industrial application, below which, the amount of undesired reactions is bound to increase. As a consequence, the added amount of lignopolyol was increased as much as possible on the basis of guaranteeing the desired properties, which was more conducive to realizing the green degradation and economic synthesis of rigid polyurethane foam.

Lignin-based polyurethane foam with excellent performance could be produced with the lignopolyol prepared by mild and efficient oxypropylation.