Influence of rhBMP-2 on rat bone marrow stromal cells cultured on titanium fiber mesh

Titanium (Ti) fiber mesh is a candidate scaffold material for the creation of bone graft substitutes (BGS). Two densities (3.54 x 10(4) cells/cm(2) [LD or low density] and 3.54 x 10(5) cells/cm(2) [HD or high density]) of rat bone marrow stromal cells were seeded on Ti-fiber mesh discs. Cells were cultured for up to 16 days, 7 days of which the cells were in the presence of various concentrations of rhBMP-2 (0, 10, 100, and 1,000 ng/mL) in order to evaluate osteogenic expression. Scanning electron microscopy (SEM), light microscopy (LM), energy dispersive spectroscopy (EDS), DNA and calcium (Ca) content measurements, and x-ray diffraction (XRD) analysis were performed. SEM and EDS evaluation showed that a confluent layer of cells was present on top of the meshes together with collagen bundles and calcified globular accretions. Light microscopical evaluation showed a densely stained layer in the upper part of the mesh. SEM and Ca content measurement showed that calcification starts at 8 days. In addition, it was demonstrated that DNA content peaked at 8 days. LM, SEM, and Ca content evaluation revealed positive effects of increasing the cell seeding density, the rhBMP-2 concentration and the culture time on mineralization. Increasing the cell seeding density also showed a positive effect on DNA content. No effects of rhBMP-2 concentration were seen on DNA content. Finally, XRD revealed that the deposited matrix contained a precipitate of a stable calcium phosphate phase. We conclude that (1) titanium fiber mesh sustains excellent osteogenic expression in vitro, (2) increasing the cell seeding density has a positive effect on osteogenic expression in titanium mesh in vitro, and (3) in high density specimens, rhBMP-2 concentrations of 100 ng/mL and 1,000 ng/mL stimulate extracellular matrix calcification in a dose-responsive manner.     

Observations on the effect of BMP-2 on rat bone marrow cells cultured on titanium substrates of different roughness

The objective of this study was to examine the osteoinductive capacity of different concentrations of BMP-2 on bone marrow stromal cells in vitro. Further, we intended to determine whether titanium provided with an increased surface roughness is more efficient in osteoblast differentiation than machined titanium. Therefore, 20,000 cells/ml were seeded and cultured on machined and grit-blasted titanium discs for 4, 8 and 16 days. Different concentrations of rhBMP-2 (0, 10, 100, 1000 ng/ml) were supplemented to the medium for 8 days of culturing. To evaluate cellular proliferation and differentiation, specimens were examined for DNA, alkaline phosphatase activity, and calcium content. Morphological appearance of the specimens at 8 and 16 days of incubation was evaluated using scanning electron microscopy. Two separate experimental runs were performed.Evaluation of the DNA and alkaline phosphatase data revealed that a significant difference existed for these data between both experimental runs. Further analysis of the DNA figures learned that roughening of the titanium surface and addition of BMP-2 had no effect on cell proliferation. The alkaline phosphatase analysis and calcium measurements revealed that BMP-2 stimulated the early differentiation of osteogenic cells on machined titanium substrates in a dose-dependent manner. After 16 days of culture, no significant differences in calcium content could be observed anymore between machined and roughened titanium surfaces. Further, the data revealed that the machined surfaces showed a significant increase in calcium deposition when 100 and 1000 ng/ml BMP-2 were supplemented to the medium. However, the roughened surfaces showed this significant enhancement in calcium content only with 1000 ng/ml BMP-2. In addition, SEM evaluation revealed a dose-dependent response to BMP-2. Increasing BMP-2 concentrations resulted in more calcified globular accretions on bone surfaces than when no BMP-2 was added.On the basis of our results, we conclude that (1) due to the heterogeneous nature of bone marrow, experimental results with primary rat bone marrow cells are difficult to reproduce from one experiment to the other, and (2) addition of rhBMP-2 in the medium stimulates the early differentiation and matrix mineralization of osteogenic cells on machined titanium surfaces in a dose-responsive manner. Further, we concluded that our roughened titanium surfaces had no effect on proliferation and differentiation of primary derived rate bone marrow cells.     

Sanfilippo syndrome: A mini-review

Summary Mucopolysaccharidosis type III (MPS III, Sanfilippo syndrome) is an autosomal recessive disorder, caused by a deficiency in one of the four enzymes involved in the lysosomal degradation of the glycosaminoglycan heparan sulfate. Based on the enzyme deficiency, four different subtypes, MPS IIIA, B, C, and D, are recognized. The genes encoding these four enzymes have been characterized and various mutations have been reported. The probable diagnosis of all MPS III subtypes is based on increased concentration of heparan sulfate in the urine. Enzymatic assays in leukocytes and/or fibroblasts confirm the diagnosis and allow for discrimination between the different subtypes of the disease. The clinical course of MPS III can be divided into three phases. In the first phase, which usually starts between 1 and 4 years of age, a developmental delay becomes apparent after an initial normal development during the first 1–2 years of life. The second phase generally starts around 3–4 years and is characterized by severe behavioural problems and progressive mental deterioration ultimately leading to severe dementia. In the third and final stage, behavioural problems slowly disappear, but motor retardation with swallowing difficulties and spasticity emerge. Patients usually die at the end of the second or beginning of the third decade of life, although survival into the fourth decade has been reported. Although currently no effective therapy is yet available for MPS III, several promising developments raise hope that therapeutic interventions, halting the devastating mental and behavioural deterioration, might be feasible in the near future. Competing interests: None declared References to electronic databases: Mucopolysaccharidosis III: type A, OMIM #252900; type B, OMIM #252920; type C, OMIM #252930; type D, OMIM #252940. Heparan N-sulfatase: EC 3.10.1.1. N-Acetyl-α-glucosaminidase: EC 3.2.1.50. Acetyl-CoA:α-glucosaminide N-acetyltransferase: EC 2.3.1.78. N-Acetylglucosamine 6-sulfatase: EC 3.1.6.14. Presented at the Annual Symposium of the SSIEM, Hamburg, 4–7 September 2007.     

Long-term use of proton pump inhibitors and vitamin B12 status in elderly individuals

Background  Some studies have shown that short-term use of proton pump inhibitors decreases the absorption of vitamin B12, but the results of studies into long-term proton pump inhibitor use and vitamin B12 deficiency are inconsistent.
Aim  To investigate whether long-term proton pump inhibitor use is associated with an abnormal vitamin B12 status in elderly individuals.
Methods  One hundred and twenty-five long-term (>3, years) proton pump inhibitor users aged 65, years and above were recruited from general practices. Their 125 partners (who did not use proton pump inhibitors) served as the reference group. Vitamin B12 status was determined by serum levels of vitamin B12 and homocysteine, and mean corpuscular volume.
Results  No differences in mean vitamin B12 levels were observed between the long-term proton pump inhibitor users and their partners [345 (s.d. 126), p m vs. 339 (s.d. 133), p m , P, = , 0.73], even after adjustment for age, gender, Helicobacter pylori status and C-reactive protein levels ( P, = , 0.87). Four proton pump inhibitor users and three partners had vitamin B12 levels <150, p m (3% vs. 2%, P, = , 1.00). No differences between the groups were observed in homocysteine levels and mean corpuscular volume.
Conclusions  No association between long-term proton pump inhibitor use and vitamin B12 status was observed. Regular testing for low vitamin B12 levels in elderly patients on long-term treatment with proton pump inhibitors is therefore not recommended.     

Considerations for Measurement of Embryonic Organ Growth

Organogenesis is a complex coordinated process of cell proliferation, growth, migration, and apoptosis. Differential growth rates, particularly during cardiogenesis, play a role in establishing morphology. Studies using stereological and cell sorting methods derive averages of morphogenetic parameters for an organ. To understand tissue composition and differential growth, the researcher must determine a number of morphogenetic parameters in the developing organ. Such measurements require sectioning to enable identification of organ borders, tissue components and cell types, three-dimensional (3D)-reconstruction of sections to visualize morphology and a 3D-measurement scheme to build local morphogenetic information. Although thick the section confocal microscopy partially solves these issues, information loss at the section surface hampers the reconstruction of 3D morphology. Episcopic imaging provides the correct morphology but lacks histological procedures to identify multiple cell types. The 3D-measurement scheme is based on systematic sampling, with overlapping sample volumes, of the entire organ in the aligned image stack. For each sample volume, morphogenetic variables are calculated and results projected back to the cube (boxel) at the sample volume center. Boxel size determines spatial resolution of the final quantitative 3D-reconstruction whereas size of the sample volume determines the precision of the morphogenetic information. The methods described here can be used to measure tissue volume, proliferation and cell size, to determine contribution and distribution of cell types in a tissue and to display this information in a quantitative 3D-reconstruction. Anat Rec, 302:49-57, 2019. © 2018 The Authors. The Anatomical Record published by Wiley Periodicals, Inc. on behalf of American Association of Anatomists     

Histological evaluation of oral implants inserted with different surgical techniques into the trabecular bone of goats

OBJECTIVE: The aim of this study was to investigate the influence of implant surface topography and surgical technique on bone response. MATERIAL AND METHODS: For the experiment, 48 screw-designed implants were used with two different surface finishes, i.e. machined and 'blasted, etched'. The implants were inserted into the left and right medial femoral condyle of eight goats using three different surgical approaches: press-fit (implant diameter=implant bed diamete(r), undersized (implant bed diameter相似文献   

Response of rat bone marrow cells to differently roughened titanium discs

The purpose of the present in vitro study was to examine the effect of surface roughness on the behaviour of osteoblast-like cells. Rat bone marrow (RBM) cells were cultured on commercially pure titanium discs. The discs were used as machined (Ti M) or ground with 4000 (Ti 4000) or 320 (Ti 320) grit paper. Proliferation rate and alkaline phosphatase activity were determined, and morphology of the cells was studied with scanning electron microscopy (SEM). Besides, fluorescent markers, energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) were used to obtain quantitative and compositional information about the produced calcified extracellular matrix (ECM). Results demonstrated after 2 days of incubation no significant difference in the percentage of attached cells to all substrates. At 5 days, Ti 320 surfaces showed significantly lower (P < 0.05) cell attachment percentages compared with Ti M and Ti 4000 surfaces. At 8 days, Ti 320 surfaces showed significantly more (P < 0.05) cell attachment than the other surfaces. The Ti 4000 surfaces showed after 8 days significantly (P < 0.05) higher alkaline phosphatase activity compared to both other surfaces. At 15 days of incubation, the alkaline phosphatase activity on Ti 4000 substrates was significantly lower (P < 0.05) than on the other substrates. No significant difference in mineralized ECM formation was observed on the ground substrate compared to the machined substrates. Physicochemical analysis confirmed the apatite-like nature of the deposited ECM on all substrates. On the basis of these findings, we concluded that our in vitro study could not clearly confirm the effect of surface roughness on the proliferation, differentiation and calcification of rat bone marrow cells.     

The effect of poly-L-lactic acid with parallel surface micro groove on osteoblast-like cells in vitro.

In this study we evaluated the behavior of rat bone marrow (RBM) cells on microgrooved poly-L-lactic acid (PLA) and polystyrene (PS) surfaces. The applied groove depth was 0.5, 1.0 or 1.5 microns, with a groove and ridge width of 1, 2, 5 or 10 microns. Scanning electron microscopical examination showed that a collagen-rich mineralized layer of extracellular matrix (ECM) was deposited. Alignment of the cells and matrix to the surface grooves was observed as described before. Quantitative evaluation, using a tetracycline labeling assay, revealed that more mineralized ECM was formed on the PLA than on the PS. Further, PLA surfaces with a groove depth of 1.0 micron and groove widths of 1 and 2 microns induced most mineralized ECM. Finally, alkaline phosphatase activity was also higher on most microgrooved PLA surfaces, compared with the other materials. On the basis of these observations, we concluded that microtextured surfaces are able to influence the differentiation of osteoblast-like cells and the deposition of mineralized matrix. Probably, this phenomenon can be used to increase the bone regeneration around oral implants.