Autobiographical memories in major depressive disorder

The objective of this research was to study the relation between the processing and recall of information in major depressive disorder. An autobiographical memory task was applied to 42 subjects with a diagnosis of major depressive disorder, 28 subjects with a diagnosis of panic disorder and 51 subjects without any psychological disorder. We used clinical scales for the evaluation of depression and anxiety. The results of the three groups, and both assessment periods of depressed subjects, were compared. The results indicate the existence, in severely depressed subjects, of a bias in processing and recalling negative information. We associate this situation to the existence of negative contents in self-schemas and processing and recall of information consistent with these schema contents. Based on the obtained results, we consider that the onset and maintenance of depression is more related to the information encoding and recall processes, controlled by the self's negative schemas, than with negative thoughts.     

The effective use of plerixafor as a real-time rescue strategy for patients poorly mobilizing autologous CD34(+) cells

Plerixafor enhances CD34⁺ cell mobilization, however, its optimal use is unknown. We hypothesized that plerixafor could “rescue” patients in the midst of mobilization when factors indicated a poor CD34⁺ yield. Of 295 consecutive autologous peripheral blood mobilization attempts at our center, 39 (13%) used plerixafor as rescue strategy due to a CD34⁺ cell concentration <10/μl (median 5.95/μl, n = 30), low CD34⁺ cell yield from prior apheresis day (median 1.06 × 10⁶ CD34⁺ cells/kg, n = 7), or other (n = 2). Patients received a median of one plerixafor dose (range: 1–4). Thirty‐four (87%) collected =2 × 10 ⁶ CD34⁺ cells/kg and 26 (67%) collected =4 × 10 ⁶ CD34⁺ cells/kg. Median collections for lymphoma (n = 24) and myeloma (n = 15) patients were 4.1 × 10⁶ and 8.3 × 10⁶ CD34/kg, respectively. A single dose of plerixafor was associated with an increase in the mean peripheral blood CD34⁺ concentration of 17.2 cells/μl (P < 0.001) and mean increased CD34⁺ cell yield following a single apheresis of 5.11 × 10⁶/kg (P < 0.03). A real‐time rescue use of plerixafor is feasible and may allow targeted use of this agent. J. Clin. Apheresis, 2012. © 2012 Wiley Periodicals, Inc.     

Materials for Production of High and Ultra-High Performance Concrete: Review and Perspective of Possible Novel Materials

This review article proposes the identification and basic concepts of materials that might be used for the production of high-performance concrete (HPC) and ultra-high-performance concrete (UHPC). Although other reviews have addressed this topic, the present work differs by presenting relevant aspects on possible materials applied in the production of HPC and UHPC. The main innovation of this review article is to identify the perspectives for new materials that can be considered in the production of novel special concretes. After consulting different bibliographic databases, some information related to ordinary Portland cement (OPC), mineral additions, aggregates, and chemical additives used for the production of HPC and UHPC were highlighted. Relevant information on the application of synthetic and natural fibers is also highlighted in association with a cement matrix of HPC and UHPC, forming composites with properties superior to conventional concrete used in civil construction. The article also presents some relevant characteristics for the application of HPC and UHPC produced with alkali-activated cement, an alternative binder to OPC produced through the reaction between two essential components: precursors and activators. Some information about the main types of precursors, subdivided into materials rich in aluminosilicates and rich in calcium, were also highlighted. Finally, suggestions for future work related to the application of HPC and UHPC are highlighted, guiding future research on this topic.     

Fatores Associados à Ocorrência de Hipertensão Arterial em Trabalhadores da Indústria do Estado do Rio Grande do Sul,Brasil

BackgroundHypertension is a serious and persistent public health problem and is one of the main causes of cardiovascular diseases and general mortality.ObjectivesThis study aimed to verify the prevalence and factors associated with systemic arterial hypertension in workers from the state of Rio Grande do Sul, Brazil.MethodsThis is a cross-sectional study using the secondary data from 20,792 industry workers from 18 to 59 years of age. The presence of arterial hypertension was determined from systolic blood pressure ≥ 140mmHg and/or diastolic blood pressure ≥ 90mmHg or taking antihypertensive medication. Factors investigated included demographic, socioeconomic, behavioral, nutritional status, and family history characteristics. Poisson regression was used in multivariate analysis, adopting a significance level of p<0.05. All analyses were stratified by sex.ResultsThe sample included 12,349 men and 8,443 women with a mean age of 32.8 years (Standard Deviation = 9.8). The prevalence of arterial hypertension was 10.3% (95% CI: 9.8-10.7), which was significantly higher in men than in women (10.9% vs 9.4%; p = 0.001). Arterial hypertension was associated with increased age, a low level of education, living with a partner, being overweight or obese, and having at least one relative with a history of hypertension for both sexes. Women with better socioeconomic conditions presented a lower prevalence of hypertension.ConclusionsThe main factors associated with hypertension included sociodemographic, nutritional, and family history characteristics. In addition, socioeconomic conditions showed an association with the occurrence of hypertension, especially among women.     

Attenuation correction of PET cardiac data with low-dose average CT in PET/CT

We proposed a low-dose average computer tomography (ACT) for attenuation correction (AC) of the PET cardiac data in PET/CT. The ACT was obtained from a cine CT scan of over one breath cycle per couch position while the patient was free breathing. We applied this technique on four patients who underwent tumor imaging with 18F-FDG in PET/CT, whose PET data showed high uptake of 18F-FDG in the heart and whose CT and PET data had misregistration. All four patients did not have known myocardiac infarction or ischemia. The patients were injected with 555-740 MBq of 18F-FDG and scanned 1 h after injection. The helical CT (HCT) data were acquired in 16 s for the coverage of 100 cm. The PET acquisition was 3 min per bed of 15 cm. The duration of cine CT acquisition per 2 cm was 5.9 s. We used a fast gantry rotation cycle time of 0.5 s to minimize motion induced reconstruction artifacts in the cine CT images, which were averaged to become the ACT images for AC of the PET data. The radiation dose was about 5 mGy for 5.9 s cine duration. The selection of 5.9 s was based on our analysis of the respiratory signals of 600 patients; 87% of the patients had average breath cycles of less than 6 s and 90% had standard deviations of less than 1 s in the period of breath cycle. In all four patient studies, registrations between the CT and the PET data were improved. An increase of average uptake in the anterior and the lateral walls up to 48% and a decrease of average uptake in the septal and the inferior walls up to 16% with ACT were observed. We also compared ACT and conventional slow scan CT (SSCT) of 4 s duration in one patient study and found ACT was better than SSCT in depicting average respiratory motion and the SSCT images showed motion-induced reconstruction artifacts. In conclusion, low-dose ACT improved registration of the CT and the PET data in the heart region in our study of four patients. ACT was superior than SSCT for depicting average respiration motion in a patient study.     

Technological Characterization of PET—Polyethylene Terephthalate—Added Soil-Cement Bricks

The ever-growing consumption and improper disposal of non-biodegradable plastic wastes is bringing worrisome perspectives on the lack of suitable environmentally correct solutions. Consequently, an increasing interest in the circular economy and sustainable techniques is being raised regarding the management of these wastes. The present work proposes an eco-friendly solution for the huge amount of discarded polyethylene terephthalate (PET) wastes by addition into soil-cement bricks. Room temperature molded 300 × 150 × 70 mm bricks were fabricated with mixtures of clay soil and ordinary Portland cement added with up to 30 wt.% of PET waste particles. Granulometric analysis of soil indicated it as sandy and adequate for brick fabrication. As for the PET particles, they can be considered non-plastic and sandy. The Atterberg consistency limits indicated that addition of 20 wt.% PET waste gives the highest plasticity limit of 17.3%; moreover, with PET waste addition there was an increase in the optimum moisture content for the compaction and decrease in specific weight. Standard tests showed an increase in compressive strength from 0.83 MPa for the plain soil-cement to 1.80 MPa for the 20 wt.% PET-added bricks. As for water absorption, all bricks displayed values between 15% and 16% that attended the standards and might be considered an alternative for non-structural applications, such as wall closures in building construction.     

High-protein diets containing different milk protein fractions differently influence energy intake and adiposity in the rat

This study was designed to determine whether (1) protein type and (2) the dietary carbohydrate to lipid content affected daily energy intake, body weight and adiposity in rats receiving high-protein diets ad libitum over a 25 d period. Each of the ten groups (n 8) consumed ad libitum one of the diets described below. A normal protein diet (P14C56L30, containing whole milk protein) and nine high-protein diets were used. The composition of the high-protein diets varied in terms of two parameters: macronutrient composition and protein type. Three macronutrient compositions (P55C35L10, P55C15L30 and P55L45) combined with three protein types (Milk, Whey and betaLac) allowed us to test nine diets. The results show that both protein type (betaLac > Whey > Milk) and the carbohydrate to lipid ratio (P55L45>P55C35L10 or P55C15L30) modulated reductions in energy intake, body weight and adiposity in rats receiving high-protein diets ad libitum, when compared with rats fed a normal diet under the same conditions. By contrast, blood lipid profiles were mainly influenced by the carbohydrate to lipid ratio (P55C15L30>P55L45 or P55C35L10). Moreover, betaLac protein was also the most efficient in tending to preserve lean body mass at the expense of fat mass, and improve blood metabolism hormones (insulin, leptin). Taken together, the present results show that whey-derived protein sources, and particularly beta-lactoglobulin-enriched fraction, are of considerable value because of their ability to reduce both body weight gain and the adiposity index.