Experimental and theoretical investigations of benzoic acid derivatives as corrosion inhibitors for AISI 316 stainless steel in hydrochloric acid medium: DFT and Monte Carlo simulations on the Fe (110) surface

The inhibition efficiency of benzoic acid (C1), para-hydroxybenzoic acid (C2), and 3,4-dihydroxybenzoic acid (C3) towards enhancing the corrosion resistance of austenitic AISI 316 stainless steel (SS) has been evaluated in 0.5 M HCl using weight loss (WL), open circuit potential (OCP), potentiodynamic polarization method, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) analysis. The results obtained from the different experimental techniques were consistent and showed that the inhibition efficiency of these inhibitors increased with the increase in concentration in this order C3 > C2 > C1. In addition, the results of the weight loss measurements showed that these inhibitors followed the Villamil isotherm. Quantum chemical calculations and Monte Carlo simulations have also been used for further insight into the adsorption mechanism of the inhibitor molecules on Fe (110). The quantum chemical parameters have been calculated by density functional theory (DFT) at the B3LYP level of theory with 6-31G+(2d,p) and 6-31G++(2d,p) basis sets in gas and aqueous phase. Parameters such as the lowest unoccupied (E_LUMO) and highest occupied (E_HOMO) molecular orbital energies, energy gap (ΔE), chemical hardness (η), softness (σ), electronegativity (χ), electrophilicity (ω), and nucleophilicity (ε) were calculated and showed the anti-corrosive properties of C1, C2 and C3. Moreover, theoretical vibrational spectra were calculated to exhibit the functional hydroxyl groups (OH) in the studied compounds. In agreement with the experimental data, the theoretical results showed that the order of inhibition efficiency was C3 > C2 > C1.

The corrosion inhibition efficiencies of benzoic acid (C1), para-hydroxybenzoic acid (C2), and 3,4-dihydroxybenzoic acid (C3) have been evaluated in 0.5 M HCl toward protecting AISI 316 stainless steel (SS).     

The relationship of structure,thermal and water vapor permeability barrier properties of poly(butylene succinate)/organomodified beidellite clay bionanocomposites prepared by in situ polycondensation

The exploitation of beidellite clay (BDT), used as a nanofiller in the preparation of poly(butylene succinate) (PBS)/organoclay biodegradable nanocomposites, was investigated. A series of bionanocomposites with various loadings of the organoclay (3CTA-BDT) were prepared by in situ polycondensation reaction between succinic anhydride (SuAh) and 1,4-butanediol (1,4-BD) at atmospheric pressure in refluxing decalin with azeotropic removal of water, and the reaction was catalyzed by non-toxic bismuth chloride (BiCl₃). X-ray diffraction (XRD) and scanning electron microscopy (SEM) results showed that 3CTA-BDT was likely exfoliated and well dispersed in PBS matrix. Thermal properties (TGA, DSC and thermal conductivity), contact angle measurements and water vapor sorption behavior of the corresponding nanocomposites were also discussed. Compared to pure PBS, a significant reduction of the diffusion coefficient and the water vapor permeability (WVP) by 44 and 37%, respectively, was observed by adding only 5 wt% of 3CTA-BDT. These results could make these bionanocomposites suitable materials for food packaging application.

The exploitation of beidellite clay (BDT), used as a nanofiller in the preparation of poly(butylene succinate) (PBS)/organoclay biodegradable nanocomposites, was investigated. Their thermal and water vapor barrier properties were also studied.     

Two-stage vertical flow multi-soil-layering (MSL) technology for efficient removal of coliforms and human pathogens from domestic wastewater in rural areas under arid climate

This paper investigates the removal efficiency of organic matter, nitrogen, phosphorus, coliforms and pathogens from rural domestic wastewater in a two-stage vertical flow multi-soil-layering (MSL) system. The effects of wastewater quality, season and arid climate conditions on pollutants removal efficiency by the system were examined for one year. The experimental setup included two similar MSL systems composed of two layers: soil-mixture-layers (SML) and gravel permeable layers (PL) that are arranged in a brick like pattern. The applied hydraulic loading rate was 1000 L m^?2 day^?1. Results showed that most of the physicochemical contaminants elimination occurred while the wastewater percolated through the first MSL stage. The second stage demonstrated an improvement in the reduction of all pollutants, especially fecal bacteria indicators and pathogens. The mean overall removal rates performed by the two-stage MSL system were 97% for TSS, 96% for BOD₅, 91% for COD, 96% for TN and 95% for TP. For bacterial indicators, the combination of two-stage MSL system achieved high log removals between 2.21 and 3.15 log units. Contaminants reduction processes in MSL technology are more dependent on internal than external environmental factors. The effectiveness of the two-stage MSL system to treat domestic wastewater was strongly influenced by wastewater quality. Significant relationships between influent contaminants level and their removal efficiency were found. The efficiency of MSL technology to reduce contaminants is not sensitive to season and air temperature fluctuations. This is due to the capacity of MSL system materials to withstand the air temperature variation, which highlights one of the advantages of MSL’s technology. Wastewater quality is the most important factor affecting the removal of contaminants in the MSL, which could be a critical parameter to considered when designing MSL system. Two-stage MSL system achieved a high treated wastewater quality amenable for treated wastewater reuse in agriculture recommended by Moroccan code of practice. Therefore, the combination of two-stage vertical flow MSL system could be considered an efficient and promising domestic wastewater treatment solution in arid countries to promote environmental protection and wastewater reuse.     

Achieving high uptake of human papillomavirus vaccination in Malaysia through school-based vaccination programme

Background

In 2006, 4 years of planning was started by the Ministry of Health, Malaysia (MOH), to implement the HPV (human papillomavirus) vaccination programme. An inter-agency and multi-sectoral collaborations were developed for Malaysia’s HPV school-based immunisation programme. It was approved for nationwide school base implementation for 13-year-old girls or first year secondary students in 2010. This paper examines how the various strategies used in the implementation over the last 7?years (2010–2016) that unique to Malaysia were successful in achieving optimal coverage of the target population.

Methods

Free vaccination was offered to school girls in secondary school (year seven) in Malaysia, which is usually at the age of 13 in the index year. All recipients of the HPV vaccine were identified through school enrolments obtained from education departments from each district in Malaysia. A total of 242,638 girls aged between 12 to 13?years studying in year seven were approached during the launch of the program in 2010. Approximately 230,000 girls in secondary schools were offered HPV vaccine per year by 646 school health teams throughout the country from 2010 to 2016.

Results

Parental consent for their daughters to receive HPV vaccination at school was very high at 96–98% per year of the programme. Of those who provided consent, over 99% received the first dose each year and 98–99% completed the course per year. Estimated population coverage for the full vaccine course, considering also those not in school, is estimated at 83 to 91% per year. Rates of adverse events reports following HPV vaccination were low at around 2 per 100,000 and the majority was injection site reactions.

Conclusion

A multisectoral and integrated collaborative structure and process ensured that the Malaysia school-based HPV immunisation programme was successful and sustained through the programme design, planning, implementation and monitoring and evaluation. This is a critical factor contributing to the success and sustainability of the school-based HPV immunisation programme with very high coverage.

     

ITPA Activity in Children Treated by Azathioprine: Relationship to the Occurrence of Adverse Drug Reactions and Inflammatory Response

Azathioprine (AZA), a thiopurine drug, is widely used in the treatment of children with immunological diseases such as inflammatory bowel disease (IBD) and autoimmune hepatitis (AIH); however, interindividual variability in the occurrence of adverse drug reactions (ADRs) and drug response is observed. This study investigated (i) the relationships between inosine triphosphate pyrophosphatase (ITPA) activity, an enzyme involved in thiopurine metabolism, and the occurrence of ADRs in children with immunological disease on AZA therapy, and (ii) the relationship between ITPA activity and the inflammatory activity observed in children with IBD. ITPA and TPMT activities were determined in 106 children with immunological disease on AZA therapy. Markers of hepatotoxicity, myelotoxicity, pancreatitis and inflammation as well as clinical information were retrospectively collected during regular medical visits. No significant association was found between ITPA activity and hepatotoxicity or clinical ADRs such as cutaneous reactions, arthralgia, flulike symptoms and gastrointestinal disorders. Concerning myelotoxicity, a significant relation was observed between ITPA activity and RBC mean corpuscular volume (MCV; p=0.003). This observation may be related to the significant relationship found between high ITPA activity and the increase in γ‐globulin level reflecting inflammation (p=0.005). In our study, ITPA activity was not associated with occurrence of ADRs, but a relationship between high ITPA activity and γ‐globulin, a marker of inflammation, was found in children with IBD. Therefore, measurement of ITPA activity may help to identify children with IBD predisposed to residual inflammation on AZA therapy. Further prospective studies are needed to confirm this result.     

Endoscopic endonasal versus transcranial approach to resection of olfactory groove meningiomas: a systematic review

Neurosurgical Review - Despite the increasing utility of the endoscopic endonasal approach (EEA) for management of anterior skull base (ASB) pathologies, the optimal treatment strategy for...     

An Exploratory Study on Resistance Spot Welding of Titanium Alloy Ti-6Al-4V

Resistance spot welding (RSW) is one of the most effective welding methods for titanium alloys, in particular Ti-6Al-4V. Ti-6Al-4V is one of the most used materials with its good ductility, high strength, weldability, corrosion resistance, and heat resistance. RSW and Ti-6Al-4V materials are often widely used in industrial manufacturing, particularly in automotive and aerospace industries. To understand the phenomenon of resistance spot weld quality, the physical and mechanical properties of Ti-6Al-4V spot weld are essential to be analyzed. In this study, an experiment was conducted using the Taguchi L9 method to find out the optimum level of the weld joint strength. The given optimum level sample was analyzed to study the most significant affecting RSW parameter, the failure mode, the weld nugget microstructure, and hardness values. The high heat input significantly affect the weld nugget temperature to reach and beyond the β-transus temperature. It led to an increase in the weld nugget diameter and the indentation depth. The expulsion appeared in the high heat input and decreased the weld nugget strength. It was caused by the molten material ejection in the fusion zone. The combination of high heat input and rapid air cooling at room temperature generated a martensite microstructure in the fusion zone. It increased the hardness, strength, and brittleness but decreased the ductility.     

The orange-cross section appearance in focal nodular hyperplasia

Abdominal Radiology -     

The role of the testicular factor INSL3 in establishing the gonadal position

INSL3, also designated Leydig insulin-like (Ley I-L) or relaxin-like factor (RLF), belongs to the insulin-like hormone superfamily. It is expressed in pre- and postnatal Leydig cells of the testis and in postnatal theca cells of the ovary. This sexual dimorphic pattern of INSL3 expression during development led us to suggest that the INSL3 factor could play an essential role in sexual differentiation, gonadal function and germ cell development. Key insights into the role of INSL3 came from analyses of INSL3 knockout mice. These mice showed impaired development of the gubernaculum ligament, a structure that is believed to mediate transabdominal descent of the testis during male embryogenesis. In double mutant XY-mice lacking INSL3 and a functional androgen receptor, it was demonstrated that both are essential for establishment of the sexual dimorphic position of the gonads through regulation of gubernaculum development and regression of the cranial suspensory ligament (CSL) during fetal life. Defects in this developmental process can cause cryptorchidism in the male, which is a most common disorder of sexual differentiation in human.