Contributions of reformatted computed tomography and panoramic radiography in the localization of third molars relative to the maxillary sinus

OBJECTIVE: The aim of this clinical study was to seek an answer to the question of whether CT gives better qualitative and quantitative information as compared to panoramic radiograph when deciding on extraction of upper impacted third molars. STUDY: The study concerned 34 third molars appearing in direct relation with the sinus on the panoramic radiograph for which a CT scan had been recommended. For each case, the panoramic radiograph was compared with the CT scan for 5 evaluation criteria. RESULTS: The CT scan was more precise than the panoramic radiograph by 1.67 mm for measurement of the level of impaction of the third molar, by 12.44 degrees for measurement of the third molar displacement, by 0.74 mm for bone height separating the third molar roots and the sinus, and by 2.26 mm for the length of roots in the sinus. The CT scan was equally accurate for measurement of the distance separating the crowns of second and third molars in 34 cases. CONCLUSIONS: This study confirms the gain in precision for the CT scan as compared with conventional techniques. The CT scan therefore presents advantages when considering the extraction of upper third molars by providing both qualitative and quantitative information liable to bear on the diagnosis and therapeutic management.     

Sinus floor augmentation with simultaneous placement of dental implants in the presence of platelet-rich plasma or recombinant human bone morphogenetic protein-7

The aim of the present study was to evaluate the possible benefit of platelet-rich plasma (PRP) in sinus grafting as compared with recombinant human bone morphogenetic protein-7 (rhBMP-7). For this purpose, we performed a bilateral sinus augmentation with anorganic bovine bone and simultaneous insertion of a titanium screw implant in five miniature pigs. Six hundred microliters of PRP and 15%-vol. autologous bone, which was collected with a trap during preparation of the implant recipient site, were added to the right sinus and 420 microl rhBMP-7 to the left sinus. A polychrome sequential labeling was performed. The animals were sacrificed 6 weeks after surgery. Undecalcified ground sections were evaluated by microradiography, digitized histomorphometry and under fluorescent light. The mean bone-implant contact using rhBMP-7 was 45.8% and 5.7% under PRP (P=0.002). The mean height of newly mineralized bone in the augmented area using rhBMP-7 amounted to 8.3 mm as opposed to 3.6 mm under PRP (P=0.013). Using PRP, the mean area of the newly formed bone was enhanced (51.3%) as compared with rhBMP-7 (33.1%); however, this difference was not statistically significant (P=0.081). In conclusion, under the selected experimental conditions the use of rhBMP-7 led to superior outcomes with regard to the osseointegration of dental implants and the height of new bone as compared with the use of PRP.     

An unusual oral chronic graft-versus-host disease-like syndrome following a liver transplant

BACKGROUND: Giving the immunosuppressive drug tacrolimus (FK506) to liver transplant patients has helped to considerably reduce oral side effects such as gingival hyperplasia. Patients taking cyclosporin who suffer from gingival hyperplasia are often switched to tacrolimus. METHODS: We present here a pediatric liver transplantation case study. The patient has been followed for 5.5 years. She developed oral lesions that resulted in the immunosuppressive therapy being changed from tacrolimus to cyclosporin. In clinical terms, the atypical pathology consisted of hyperpigmented patches on the gingival margin, the internal surfaces of the cheeks, and the intraoral surfaces of the lips. When located on the lips, the hyperpigmented patches were associated with pruriginous and edematous lesions. RESULTS: Optical and electronic microscopic examinations of a gingival tissue sample revealed the presence of melanin incontinence and lichenoid lesions with degenerated keratinocytes and a mild infiltrate of lymphocytes. This points to a chronic graft-versus-host disease (cGvHD)-like syndrome linked to tacrolimus. This diagnosis was given further credence by improvement in the lesions following the switch to cyclosporin. CONCLUSION: To our knowledge, this is the first reported case of tacrolimus-associated chronic GvHD-like syndrome occurring in the oral mucosa.     

Comparison of methylprednisolone and ketoprofen after multiple third molar extraction: a randomized controlled study

In a prospective, double blind, and randomized study, we compared methylprednisolone and ketoprofen after anesthesia for multiple third molar extraction. In addition to paracetamol, 90 patients were allocated to receive intravenously either ketoprofen 100 mg or methylprednisolone 1 mg/kg. Severity of pain was measured with visual analogue scale (VAS) in recovery room. Sixty-three percent of patients receiving methylprednisolone had a VAS score <30 mm compared with 42% of those receiving ketoprofen (P = 0.04), with no difference in the consumption of morphine. We observed only marginal difference between methylprednisolone and ketoprofen to relieve pain after this surgery.     

Enamel matrix derivative alone or in combination with a bioactive glass in wide intrabony defects

This controlled clinical study investigated the clinical and radiographic outcome of wide intrabony periodontal defects treated by enamel matrix derivatives alone or in combination with a bioactive glass over a period of 8 months. Twenty-three chronic periodontitis patients, who received initial therapy and had radiographical interproximal defects with an associated probing depth of 6 mm or more and an intrabony component of at least 4 mm, were included. Each of the patients, contributing at least one intrabony defect, was treated with either enamel matrix derivative alone (group 1, n=10) or the combination (group 2, n=13). In both groups, all clinical and radiographical parameters were improved. Groups 1 and 2 presented a mean pocket reduction of 5.03±0.89 and 5.73±0.80 mm, recession of 0.97±0.24 and 0.56±0.18 mm, relative attachment gain of 4.06±1.06 and 5.17±0.85 mm, and radiographic bone gain of 2.15±0.42 and 2.76±0.69 mm, respectively. An intergroup comparison revealed significant differences for all of the parameters, yielding a more favorable outcome towards the combined approach. Within the limits of the study, both treatments resulted in marked clinical and radiographical improvements, but combined treatment seemed to enhance the results in the treatment of wide intrabony defects.     

A quantitative method of measuring the microleakage of thermocycled or non-thermocycled posterior tooth restorations

This study quantified microleakage in restorations made with three packable resin composites-Solitaire, SureFil and P60; one hybrid resin composite-Z250 and an amalgam-Dispersalloy, with or without the thermocycling process. Sixty sound, freshly extracted human molars were sectioned mesiodistally, creating buccal and lingual blocks. One hundred blocks with the flattest surface were selected. Cylindrical cavities with a diameter of 1.85 +/- 0.05 mm and a depth of 1.5 mm were prepared with a special diamond bur. The blocks were randomly assigned to 10 test groups (n = 10): five restorative materials and two thermal stress groups (thermocycled groups at 3,000 cycles at 5 degrees C and 55 degrees C with a dwell time of one minute at each temperature, or non-thermocycled). After the thermocycling test, the samples were immersed in 2% methylene blue for 12 hours. The samples were ground and the powder prepared for analysis in an absorbance spectrophotometer. All the results were statistically analyzed by the Kruskal-Wallis test and the Mann Whitney test. For the non-thermocycled groups, the means (microg/ml) of microleakage were: Amalgam-4.279 (a); Solitaire-4.148 (ab); Z250-3.418 (abc); P60-3.184 (bc); SureFil-2.890 (c). For the thermocycled groups, the means were: Amalgam-7.572 (a); Solitaire-5.471 (a); Z250-4.330 (ab); P60-3.418 (bc) and SureFil-2.779 (c). Thermocycling analysis showed no significant differences between the thermocycled and non-thermocycled groups for each material tested. It was concluded that no test material prevented microleakage. Only SureFil and P60 showed leakage means significantly lower than amalgam, with SureFil showing lower leakage than Solitaire. P60 only showed lower leakage than Solitaire in the thermocycled groups and Z250 showed results similar to the others materials.     

An investigation of the tear energy of five soft lining materials

The purpose of this in vitro study was to compare the tear energy of three silicone rubber materials and two acrylic resin soft lining materials in different solutions and times of storage. The tear energy of specimens stored in artificial saliva, denture cleanser and distilled water was measured over 1, 4, and 16 weeks, using a tensile testing machine. Data were analyzed with a one-way analysis of variance and a Duncan multiple comparison test. Silicone rubber materials had the least tear energy. The type of material, time of storage and solution were statistically significant factors affecting on tear energy. The ability of the material to resist rupture during normal use (including constantly being in saliva and usually immersed in denture cleanser or water for storage) is of practical importance.     

Local application of n-3 or n-6 polyunsaturated fatty acids in the treatment of human experimental gingivitis

BACKGROUND: Polyunsaturated fatty acids have the potential to attenuate inflammation by the synthesis of mediators of the 15-lipoxygenase pathways, which show opposite effects to the pro-inflammatory arachidonic acid metabolites such as leukotriene B4 (LTB4). AIMS: The aim of this clinical study was to evaluate the effects of topical application of n-6 or n-6 polyunsaturated fatty acids in patients with experimental gingivitis. METHODS: In each subject, similar teeth served as experimental and control over a 21-day non-hygiene phase and a 9-day resolving phase. Efficacy assessment was based on the bleeding on probing frequency (BOP) and the gingivocrevicular fluid volume (GCF). GCF was determined by inserting a filter paper strip for 30 s and measurements were performed on a Periotron 8000. The LTB4 concentration was analyzed by reversed-phase high-pressure liquid chromatography. RESULTS: After 21 days of plaque growth, the BOP, GCF and LTB4 levels were significantly increased in all groups, with no differences between the control and experimental side. Rinsing of an area with established gingivitis for a 9-day period significantly reduced the GCF in the n-6 group (71.9 (18.7) versus 47.4 (11.4) Periotron Units, median (inter quartile range)). CONCLUSION: The topical application of n-6 or n-6 fatty acids failed to inhibit the development of experimental gingivitis. Rinsing with n-6 fatty acids could reduce the level of GCF in established experimental gingivitis.     

A simple model to demonstrate the electronic apex locator

AIM: To describe and evaluate a newly developed model for demonstrating and teaching the use of electronic apex locators. SUMMARY: A phantom model, master jaw model and extracted human teeth were used to construct the demonstration model with alginate impression material as the periapical conductive medium. The model was validated in a series of length determinations with apical foramina enlarged to 0.20, 0.30 and 0.45 mm diameter, and the stability of the model was evaluated up to 45 h after construction. All evaluations were conducted with the Root ZX apex locator with 2.65 and 5.25% NaOCl in the canals. Most length measurements were within 1 mm of actual root length (range: -2.2 to +0.21 mm) and did not change significantly over 45 h for teeth with foramina of 0.3 mm or less. Measurements for teeth with wide (0.45 mm) apices were stable up to 28 h. NaOCl concentration did not significantly affect the readings. KEY LEARNING POINTS: A simple, inexpensive model can be manufactured from plastic dental jaws, natural teeth and alginate impression material to demonstrate electronic working length measurement. The model is stable for many hours and provides consistent results with different concentrations of NaOCl in the canal and various apical diameters. The model is a useful teaching aid but needs further evaluation and refinement before use in research applications.     

A prospective multicenter evaluation of 1,583 3i implants: 1- to 5-year data

PURPOSE: The purpose of this prospective multicenter study was to evaluate the efficacy of 3i threaded implants for the treatment of edentulous patients in a 1- to 5-year period. This article reports the total data and global results of 3 threaded designs of 3i implants: self-tapping, ICE, and Osseotite. MATERIALS AND METHODS: A total of 1,583 implants (619 ICE, 545 Osseotite, and 419 self-tapping) were placed between 1995 and 1999 in 528 patients at 13 European clinical centers. The average age of the patients was 53.6 years. Clinical and radiographic evaluations were performed annually for up to 5 years. RESULTS: Of the total implants, 707 were placed in the maxilla and 876 in the mandible. A total of 1,162 implants were placed in posterior segments. Forty-eight implants were lost to follow-up and 55 were failures. The most frequent prosthetic indication was the short-span fixed prosthesis (440 cases), followed by 172 single-tooth replacements, 56 long-span prostheses, and 4 overdentures. Radiographic evaluation after 6, 12, and 24 months of implant loading showed, respectively, mean crestal bone loss of 0.04 +/- 1.3 mm, 0.12 +/- 1.6 mm, and 0.2 +/- 1.7 mm. A cumulative survival rate of 96.5% was observed 5 years after implant placement, with 97.2% survival in the maxilla and 95.8% in the mandible. The survival rate was similar in anterior (96.7%) and posterior (96.5%) segments. DISCUSSION: A total of 55 failures were reported in this study with 47 early failures and 8 late failures. The rate of late failures is of utmost importance for the restorative dentist. CONCLUSION: This clinical study gives evidence of very high success rates using 3 threaded designs of 3i implants.