Histological and immunohistochemical analysis of initial and early osseous integration at chemically modified and conventional SLA titanium implants: preliminary results of a pilot study in dogs

OBJECTIVES: The aim of the present pilot study was to investigate initial and early tissue reactions to modified (mod) and conventional sand-blasted, large grit and acid-etched (SLA) titanium implants. MATERIAL AND METHODS: Implantation of modSLA and SLA implants was performed bilaterally in both the mandible and maxilla of dogs. The animals were sacrificed after a healing period of 1, 4, 7 and 14 days, respectively. Peri-implant tissue reactions were assessed in non-decalcified tissue sections using conventional histology (Toluidine blue-TB and Masson Goldner Trichrome stain-MG) and immunohistochemistry using monoclonal antibodies to transglutaminase II (TG) (angiogenesis) and osteocalcin (OC). Bone density (BD) and bone to implant contact (BIC) were assessed histomorphometrically. RESULTS: Day 1 revealed an early TG antigen reactivity in the provisional fibrin matrix adjacent to both implant surfaces. Day 4 was characterized by the formation of a collagen-rich connective tissue (MG), which revealed the first signs of OC synthesis adjacent to modSLA surfaces. Immunohistochemical staining for TG revealed a direct correlation between angiogenesis and new bone formation, which was clearly identifiable after 7 days by means of increasing BD, BIC and OC values. After 14 days, modSLA surfaces seemed to be surrounded by a firmly attached mature, parallel-fibered woven bone. CONCLUSIONS: Within the limits of the present study, it might be concluded that the combination of immunohistochemical and conventional histological stainings in non-decalcified tissue sections is a valuable technique to evaluate the initial and early stages of wound healing around endosseous titanium implants.     

Characterization and dissolution behavior of sputtered calcium phosphate coatings after different postdeposition heat treatment temperatures

There is a lack of correlation between specific properties of hydroxyapatite coating surfaces, osseointegration processes, and implant success. The aim of this study was to evaluate the relationship between well-characterized structural and chemical properties of radio-frequency sputtered calcium phosphate (CaP) coatings and their dissolution behavior. Sputtered CaP coatings were evaluated as-sputtered (non-heat treated) or after 1 hour of postsputter heat treatments at 400 degrees C or 600 degrees C. All coatings were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and contact angle measurement. The dissolution behavior of CaP coatings in the presence and absence of proteins was also investigated. It was observed from this study that as-sputtered CaP coatings were amorphous. The 400 degrees C heat-treated CaP coatings exhibited low crystallinity (1.9% +/- 0.4%), whereas the 600 degrees C heat-treated CaP coatings were highly crystalline (67.0% +/- 2.4%). The increase of Ca/P ratio, PO4/HPO4 ratio, and the number of PO4 peaks were observed to be consistent with the increase in heating temperature and the degrees of coating crystallinity. Phosphorus ions released from CaP coatings decreased with the increase of crystallinity of CaP coatings. In addition, immersion of CaP coatings in media containing proteins resulted in an increase in P ions released as compared with coatings immersed in media without proteins. It was concluded that the degree of CaP coating crystallinity can be controlled by varying the postdeposition heat-treatment temperature. It was also concluded that, aside from coating crystallinity, dissolution and reprecipitation of the coatings can be controlled by knowing the presence of proteins in the media and PO4/HPO4 ratio within the coatings.     

Tooth brushing, tooth wear and dentine hypersensitivity--are they associated?

Evidence suggests that patients suffer the painful symptoms of dentine hypersensitivity when dentine is exposed and the dentinal tubule system is opened to the oral cavity to allow stimuli to trigger a neural response in the pulp via a hydrodynamic mechanism. The processes needed to localise lesions of dentine hypersensitivity include loss of enamel and/or gingival recession. Whilst tooth brushing with or without toothpaste appears to cause minimal wear to enamel (in the absence of acids), circumstantial evidence implicates tooth brushing with gingival recession and exposure of dentine. Other tooth wear processes, notably attrition and acid erosion, cause loss of enamel and can expose dentine. Therefore, sensitivity may result. How lesions of dentine hypersensitivity are initiated is a matter of conjecture and based on extrapolating data from studies, mainly in vitro, to effect in vivo. Again, this circumstantial type of evidence suggests that abrasion by some toothpastes and erosion by dietary acid could open the tubule system. Little is known about the actual effect of de-sensitising toothpastes on lesions of dentine hypersensitivity even though they are formulated to either occlude dentinal tubules or block the neural response in the pulp. Clinical studies have produced contradictory findings for the efficacy of products and there have been extremely few evidence-based reviews. In conclusion, available evidence supports a probable link of tooth brushing, with or without toothpaste and an acidic diet, to both tooth wear and dentine hypersensitivity, and also suggests that dentine hypersensitivity is a tooth wear phenomenon. Although there is a need for more direct clinical and scientific evidence for these associations, it is recommended that they be taken into consideration when planning management strategies for the dentine hypersensitivity sufferer.     

The atraumatic restorative treatment (ART) approach for managing dental caries: a meta-analysis

The number of publications reporting on the survival of ART sealants and ART restorations has increased considerably in recent years. A systematic investigation of their longevity is therefore warranted. Based on three exclusion criteria, a literature search in the electronic libraries Pubmed and Medline revealed 28 eligible publications for inclusion in a meta-analysis. High mean survival rates for single-surface ART restorations using high-viscosity glass-ionomer in primary dentitions over 3 years were found (95% after 1 year to 86% after 3 years). These rates were statistically significantly higher than for those of multiple-surface ART restorations in primary dentitions (p<0.0001). High mean survival rates for single-surface ART restorations using high-viscosity glass-ionomer in permanent dentitions over 6 years were found (97% after 1 year to 72% after 6 years). The mean annual failure rates for single-surface ART restorations using high-viscosity glass-ionomer in primary and permanent dentitions and for multiple-surface ART restorations in primary dentitions are 4.7%, 4.7% and 17%, respectively. The number of studies reporting on the retention and caries preventive effect of ART sealants was low. It is concluded that single-surface ART restorations using high-viscosity glass-ionomer in both primary and permanent dentitions show high survival rates. Medium-viscosity glass-ionomer should not be used for ART restorations.     

Consensus statement on fiber-reinforced polymers: current status,future directions,and how they can be used to enhance dental care

The Second Scientific Fibre Reinforcement Symposium was held in Nijmegen, The Netherlands, on October 13th, 2001. The participants were invited speakers with extensive scientific and clinical backgrounds in glass fiber and polyethylene fiber research. The symposium reports focused on four areas of fiber reinforcement research: materials development, laboratory testing, clinical systems development, and clinical data. The consensus reached on the current status and future directions of this technology is reported here.     

Assessing periodontal disease risk: a comparison of clinicians' assessment versus a computerized tool

BACKGROUND: The authors conducted a study to compare risk scores assigned by subjective expert clinician opinion with quantitative scores generated for the same subjects using the Periodontal Risk Calculator, or PRC. METHODS: The authors assembled a group of 107 subjects and performed standard periodontal examinations. The authors entered the resulting information into the PRC and calculated risk scores for two and four years, assuming no treatment would be performed. Using the same subject records, three groups of expert clinicians assigned risk scores for years 2 and 4. The authors analyzed the data to reveal the extent of interevaluator variation and the level of agreement between expert clinician scores and PRC scores. RESULTS: The extent of variation among scores assigned by individual expert clinicians was greater than the authors had expected. Expert clinicians consistently assigned more subjects to PRC risk group 2 and fewer to risk group 5 than did the PRC. The authors observed very high heterogeneity in the risk scores expert clinicians assigned to patients in each of the PRC-assigned groups. Thus, expert clinicians varied greatly in evaluating risk and, relative to the PRC, they appeared to underestimate periodontitis risk, especially for high-risk patients. CONCLUSIONS AND PRACTICE IMPLICATIONS: The authors' observations suggest that use of risk scores generated for individual patients by subjective expert clinician opinion about risk in periodontal clinical decision making could result in the misapplication of treatment for some patients and support the use of an objective tool such as the PRC. Use of the PRC over time may be expected to result in more uniform and accurate periodontal clinical decision making, improved oral health, reduction in the need for complex therapy and reduction in health care costs.     

Correlation between fracture properties and clinical performance of composite resins in Class IV cavities

One hundred and two Class IV cavities were restored randomly with four composite resins. The restorations were assessed at six months, one year, two years and three years for surface chipping, bulk fracture and incisal wear. The data were correlated with various mechanical properties of the materials. A significant correlation was found between surface chipping/bulk fracture and fracture toughness (P = 0.002), elastic modulus (P = 0.006) and tensile strength (P = 0.045). There was a trend towards an association between incisal wear and both elastic modulus and inherent flaw size. Fracture toughness may be a useful indicator of the clinical performance of composites in Class IV cavities.     

Guidelines for the management of traumatic dental injuries. III. Primary teeth

Abstract –  Trauma to the primary dentition present special problems and the management is often different as compared with permanent teeth. An appropriate emergency treatment plan is important for a good prognosis. Guidelines are useful for delivering the best care possible in an efficient manner. The International Association of Dental Traumatology (IADT) has developed a consensus statement after a review of the dental literature and group discussions. Experienced researchers and clinicians from various specialties were included in the group. In cases in which the data did not appear conclusive, recommendations were based on the consensus opinion of the IADT board members. The guidelines represent the current best evidence based on literature research and professional opinion. In this third article out of three, the IADT Guidelines for the management of traumatic injuries in the primary dentition, are presented.