The influence of different placement techniques on the microtensile bond strength of low-shrink silorane composite bonded to Class I cavities

The aim of this in vitro study was to evaluate the microtensile bond strength (μTBS) of a low-shrink silorane-based composite (Filtek Silorane) and a methacrylate-based composite (Filtek Z250) to the bottom dentin of a Class I cavity using different placement techniques. Twelve third molars were used. Standard, box-type Class I cavities (6.0 x 4.0 x 2.5 mm) were prepared at the occlusal crown center, with the pulpal floor ending approximately at the midcoronal dentin. The teeth were then randomly divided into four groups, according to each placement technique: ZI--Filtek Z250 placed incrementally; ZB--Filtek Z250 placed in bulk; SI--Filtek Silorane placed incrementally; and SB--Filtek Silorane placed in bulk. Each restored third molar was subjected to microtensile bond testing after 24 hours of storage in distilled water at 37 degrees C. After storage, each molar was longitudinally sectioned in both axes to obtain rectangular sticks with an approximate 0.49 mm2 cross-sectional area. Data were analyzed by one-way ANOVA followed by a Tukey post hoc test (P = 0.05). After debonding, the failure modes were analyzed using a stereomicroscope. The ZI group (72.6 MPa) showed the highest μTBS, followed by the ZB group (60.2 MPa), while the SI (34.4 MPa) and SB (42.6 MPa) groups demonstrated statistically significant lower bond strengths. The type of placement technique did not influence the μTBS of silorane-based composites to the bottom dentin of Class I cavities. The methacrylate-based composite showed superior performance, regardless of the placement technique.     

Evaluation of the integrity of dental sealants by optical coherence tomography

Objectives

The purpose of the present research was to demonstrate images of failures into the structure of pit and fissure sealants using optical coherence tomography (OCT).

Methods

Five human third molars were selected and the sealant ALPHA SEAL LIGHT/DFL was applied according to the manufacturer instructions. For evaluation of the structure of pit and fissure sealants, twenty OCT images of each tooth were performed before and after application of sealant. A total of 200 images were evaluated. A home built spectral OCT system used was operating in spectral domain (SD-OCT), at 840 nm and a measured spatial resolution of 10 μm. The system is based on the Michelson interferometer set-up and is controlled by the software OCT 800 - Complex Square/LabView, that collects data and generates the image. The occlusal surfaces were scanned in a bucco-lingual direction and tomographic images parallel to long axis of tooth were obtained. After the achievement of the images by OCT, the crown of each tooth was sectioned in a occlusogingival direction (buccolingually). Images from each section were obtained and evaluated by an optical microscope. OCT and microscopic images were compared.

Results

Representative images showed that OCT image provides the insight into sealant material. It was possible to clearly identify the internal structure of sealant and the subjacent enamel. Sealant and enamel are very well distinguished, and failures at the interior and at surface are well detected.

Significance

OCT could generate images of the features of fissures, bubbles and failures in the adaptation of sealants, opening up possibilities in the future to monitoring sealant application and retention in short and long term.     

Prevalence and risk factors of apical periodontitis in endodontically treated teeth in a selected population of Brazilian adults

The aim of this study was to assess the prevalence and risk factors of apical periodontitis in endodontically treated teeth in a selected population of Brazilian adults. A total of 1,372 periapical radiographs of endodontically treated teeth were analyzed based on the quality of root filling, status of coronal restoration and presence of posts associated with apical periodontitis (AP). Data were analyzed statistically using odds ratio, confidence intervals and chi-square test. The prevalence of AP with adequate endodontic treatment was low (16.5%). This percentage dropped to 12.1% in cases with adequate root filling and adequate coronal restoration. Teeth with adequate endodontic treatment and poor coronal restoration had an AP prevalence of 27.9%. AP increased to 71.7% in teeth with poor endodontic treatment associated with poor coronal restoration. When poor endodontic treatment was combined with adequate coronal restoration, AP prevalence was 61.8%. The prevalence of AP was low when associated with high technical quality of root canal treatment. Poor coronal restoration increased the risk of AP even when endodontic treatment was adequate (OR=2.80; 95%CI=1.87-4.22). The presence of intracanal posts had no influence on AP prevalence.     

Sealing ability of MTA, Super EBA, Vitremer and amalgam as root-end filling materials

This study evaluated the root-end sealing ability of mineral trioxide aggregate (MTA Angelus), reinforced zinc oxide-eugenol cement (Super EBA), resin-modified glass ionomer (Vitremer) and zinc-free amalgam (GS-80) (control). The root canals of eighty human lower molars were accessed, cleansed, shaped and obturated. Apexes were resected and cavities were prepared. Teeth were divided into 4 groups of 40 cavities, root-end filled with the materials, and immersed in methylene blue for 72 h at 37 degrees C. Roots were then sectioned transversally at each millimeter and evaluated under magnification, observing the dye penetration in each section. Data were evaluated using Kruskal-Wallis test at a 5% level of significance, showing the differences among all materials (p < 0.001). The crescent order of microleakage was MTA < Vitremer < Super EBA < amalgam. Higher leakage levels were observed in the first millimeter sections of amalgam, Vitremer and MTA, when compared with the third millimeter section (p < 0.05).     

A new periapical index based on cone beam computed tomography

The purpose of this study was to evaluate a new periapical index based on cone beam computed tomography (CBCT) for identification of apical periodontitis (AP). The periapical index proposed in this study (CBCTPAI) was developed on the basis of criteria established from measurements corresponding to periapical radiolucency interpreted on CBCT scans. Radiolucent images suggestive of periapical lesions were measured by using the working tools of Planimp software on CBCT scans in 3 dimensions: buccopalatal, mesiodistal, and diagonal. The CBCTPAI was determined by the largest lesion extension. A 6-point (0-5) scoring system was used with 2 additional variables, expansion of cortical bone and destruction of cortical bone. A total of 1014 images (periapical radiographs and CBCT scans) originally taken from 596 patients were evaluated by 3 observers by using the CBCTPAI criteria. AP was identified in 39.5% and 60.9% of cases by radiography and CBCT, respectively (P < .01). The CBCTPAI offers an accurate diagnostic method for use with high-resolution images, which can reduce the incidence of false-negative diagnosis, minimize observer interference, and increase the reliability of epidemiologic studies, especially those referring to AP prevalence and severity.     

The Impact of low power laser in the treatment of conditioning-induced oral mucositis: a report of 11 clinical cases and their review

We have investigated the clinical effects of low power laser therapy (LPLT) on the treatment of conditioning-induced oral mucositis (OM) in patients submitted to hematopoietic stem cell transplantation (HSCT). The evaluation of OM was done using the Oral Mucositis Assessment Scale (OMAS) and World Health Organization (WHO) scale. In the context of a randomized placebo-controlled trial with 38 patients for the evaluation of preventive LPLT, eleven individuals were submitted to allogeneic (AL) HSCT and developed oral mucositis grade 4 (WHO) or a total area of OM of 12 cm (OMAS) and due to that were treated with LPLT with the purpose of symptom relief. The irradiation used was a diode InGaAlP, emitting light at 660 nm, 50 mW and 8 J/cm(2) measured at the end of fiber optic with 0.196 cm(2) of section area during the treatment. The tip of the laser device touched the oral mucosa and patients recovered on average 6 days (3-12 days) from the beginning of the laser application. Our results have indicated that the use of LPLT in HSCT patients is a powerful instrument in the treatment of overt OM and is now a standard procedure in this group of patients in our hospital.     

In vitro evaluation of microleakage of different materials used as pit-and-fissure sealants

The aim of this study was to evaluate in vitro the marginal microleakage of different materials used as pit-and-fissure sealants (Delton, Filtek Flow, Dyract Flow and Vitremer). Fifty-six extracted sound human third molars were randomly assigned to 4 groups (n=14). After sealant placement, the teeth were thermocycled (500 cycles; 5 degrees C, 37 degrees C and 55 degrees C), isolated, immersed in 2% buffered methylene blue dye for 4 h, included in acrylic resin and sectioned longitudinally in a buccolingual direction. The sections were analyzed for leakage using an stereomicroscope. A 4-criteria ranked scale was used to score dye penetration. All materials exhibited dye penetration to some extension and no statistically significant difference was observed among the groups (p>0.05). In conclusion, the findings of this study showed that a flowable composite resin, a flowable compomer and resin-modified glass ionomer placed on occlusal pits and fissures had similar marginal sealing as the unfilled self-cured resin-based sealant.     

Evaluation of minipigs as an animal model for alveolar distraction

OBJECTIVE: Alveolar distraction osteogenesis is a relatively novel tissue regeneration technique that remains, in some respects, at an experimental stage. The selection of an experimental animal biomodel is not clearly defined, with reports in the reviewed literature on dogs, sheep, and monkeys. The present objective was to compare 2 experimental biomodels (dog and minipig) using an alveolar distraction protocol with a novel prototype distractor. STUDY DESIGN: Three beagle dogs and 3 G?ttingen minipigs were evaluated, placing the distractor at the right hemimandible alveolar ridge after previous extraction of premolars. The radiological examination was carried out immediately after the distraction and at 2 weeks of consolidation. RESULTS: Satisfactory clinical and radiological results were obtained in 2 of 3 beagle dogs after the previous unilateral extraction of mandibular and maxillary premolars. During the consolidation, a height gain of approximately 5 mm was observed, with the appearance of radiodense bone trabeculae in the distraction chamber. The distraction failed in all of the minipigs. CONCLUSION: The minipig was not an appropriate biomodel for the study of alveolar distraction because the investigators were not able to maintain the seal of the distraction chamber or the stability of the distractor.     

Comparative evaluation of two different vestibuloplasty surgical procedures in cleft patients: a pilot study.

OBJECTIVE: Patients with a cleft lip or palate often present alterations in the labial aspect of the ridge, resulting in a shallow vestibule. This study compares the results of two different surgical procedures on deepening of the labial sulcus. INTERVENTIONS: Ten patients with a cleft lip and palate were separated into two groups and underwent different vestibuloplasty procedures. An experimental group used a removable retention splint. Preoperative and 4-month postoperative sulcus heights were measured and analyzed statistically. RESULTS: No statistically significant differences could be detected between groups. CONCLUSION: The results indicated that to reach consistent results, a larger number of patients must be submitted to this evaluation.