Cross-Sectional Associations between Mothers and Children’s Breakfast Routine—The Feel4Diabetes-Study

Positive influences of family members have been associated with a high probability of children’s daily breakfast consumption. Therefore, the aim of this study was to scrutinize the association of breakfast routines between mothers and their children. The baseline data of the Feel4Diabetes-study was obtained in 9760 children (49.05% boys)–mother pairs in six European countries. A parental self-reported questionnaire gauging the frequency of breakfast consumption and of breakfast´ foods and beverages consumption was used. Agreement in routines of mothers and their children’s breakfast consumption was analyzed in sex-specific crosstabs. The relationship of breakfast routine and food groups’ consumption between mothers and their children was assessed with analysis of covariance. The highest proportion of children who always consumed breakfast were those whose mothers always consumed it. Children consuming breakfast regularly had a higher intake of milk or unsweetened dairy products and all kind of cereal products (low fiber and whole-grain) than occasional breakfast consumers (p < 0.05). The strong similarity between mothers and children suggests a transfer of breakfast routine from mothers to their children, as a high proportion of children who usually consume breakfast were from mothers also consuming breakfast. All breakfast foods and beverages consumption frequencies were similar between children and their mothers.     

Wide Awake Open Carpal Tunnel Release: The Effect of Local Anesthetics in the Postoperative Outcome

Introduction  Wide awake open carpal tunnel decompression is a procedure performed under local anesthesia. This study aimed to present the effect of various local anesthetics in peri and postoperative analgesia in patients undergoing this procedure. Materials and Methods  A total of 140 patients, with 150 hands involved, underwent carpal tunnel release under local anesthesia. Patients were divided in five groups according to local anesthetic administered: lidocaine 2%, ropivacaine 0.75%, ropivacaine 0.375%, chirocaine 0.5%, and chirocaine 0.25%. Total 400 mg of gabapentin were administered to a subgroup of 10 cases from each group (50 cases totally), 12 hours before surgery. Patients were evaluated immediately, 2 weeks and 2 months after surgery according to VAS pain score, grip strength, and two-point discrimination. Results  In all patients, pain and paresthesia improved significantly postoperatively, while the use of gabapentin did not affect outcomes. Grip strength recovered and exceeded the preoperative value 2 months after surgery, without any difference between the groups. No case of infection, hematoma, or revision surgery was reported. Conclusion  Recovery after open carpal tunnel release appears to be irrelevant of the type of local anesthetic used during the procedure. Solutions of low local anesthetic concentration (lidocaine 2%, ropivacaine 0.375%, and chirocaine 0.25%) provide adequate intraoperative analgesia without affecting the postoperative course.     

Acid Generation and Heavy Metal Leachability from Lignite Spoil Heaps: Impact to the Topsoils of Oropos Basin,North Attica,Greece

The disposal of lignite spoil and tailings poses a major environmental problem in lignite mining sites which is associated with the oxidation of sulfide minerals contained in the primary ore. This process renders acidic effluents. Lignite mining in the Oropos Neogene basin, North Attica, Greece operated since the last century and ceased in the late 1960s. Piles of complex waste material are dispersed close to the mining sites. The high sulfur content and low Net Neutralization Potential, i.e. values < − 20 CaCO₃ kg/t in most analyzed waste samples, indicate that the waste is prone to acid generation. The leachates (EN12457) from the lignite spoils showed high concentrations in Ni and Zn exceeding the EU regulatory limits for the non-hazardous wastes. GIS-based geochemical maps of the topsoil showed enrichment in Ni (Cr, V) associated with the regional geogenic enrichment but also local accumulation around the hot spot sites of lignite spoil heaps.

     

Association of sleep duration and quality with immunological response after vaccination against severe acute respiratory syndrome coronavirus-2 infection

Growing evidence suggests that sleep could affect the immunological response after vaccination. The aim of this prospective study was to investigate possible associations between regular sleep disruption and immunity response after vaccination against coronavirus disease 2019 (COVID-19). In total, 592 healthcare workers, with no previous history of COVID-19, from eight major Greek hospitals were enrolled in this study. All subjects underwent two Pfizer–BioNTech messenger ribonucleic acid (mRNA) COVID-19 vaccine BNT162b2 inoculations with an interval of 21 days between the doses. Furthermore, a questionnaire was completed 2 days after each vaccination and clinical characteristics, demographics, sleep duration, and habits were recorded. Blood samples were collected and anti-spike immunoglobulin G antibodies were measured at 20 ± 1 days after the first dose and 21 ± 2 days after the second dose. A total of 544 subjects (30% males), with median (interquartile range [IQR]) age of 46 (38–54) years and body mass index of 24·84 (22.6–28.51) kg/m² were eligible for the study. The median (IQR) habitual duration of sleep was 6 (6–7) h/night. In all, 283 participants (52%) had a short daytime nap. In 214 (39.3%) participants the Pittsburgh Sleep Quality Index score was >5, with a higher percentage in women (74·3%, p < 0.05). Antibody levels were associated with age (r = −0.178, p < 0.001), poor sleep quality (r = −0.094, p < 0.05), insomnia (r = −0.098, p < 0.05), and nap frequency per week (r = −0.098, p < 0.05), but after adjusting for confounders, only insomnia, gender, and age were independent determinants of antibody levels. It is important to emphasise that insomnia is associated with lower antibody levels against COVID-19 after vaccination.     

Tuberculosis notifications in Australia, 2003.

The National Notifiable Disease Surveillance System (NNDSS) received 982 tuberculosis (TB) notifications in 2003, of which 947 were new cases, 33 were relapses and two were cases with unknown history. The incidence of TB in Australia has remained at a stable rate since 1985 and was 4.9 cases per 100,000 population in 2003. The high-incidence groups remain people born overseas and Indigenous Australians at 19.9 and 8.7 cases per 100,000 population, respectively. By contrast the incidence in non-Indigenous Australians was 0.9 per 100,000. Comparison of the 2003 TB notification data against the performance indicators set by National Tuberculosis Advisory Committee highlights that enhanced TB control measures should be considered among these high-risk groups.     

Understanding the Driving Forces That Trigger Mutations in SARS-CoV-2: Mutational Energetics and the Role of Arginine Blockers in COVID-19 Therapy

SARS-CoV-2 is a global challenge due to its ability to mutate into variants that spread more rapidly than the wild-type virus. Because the molecular biology of this virus has been studied in such great detail, it represents an archetypal paradigm for research into new antiviral drug therapies. The rapid evolution of SARS-CoV-2 in the human population is driven, in part, by mutations in the receptor-binding domain (RBD) of the spike (S-) protein, some of which enable tighter binding to angiotensin-converting enzyme (ACE2). More stable RBD-ACE2 association is coupled with accelerated hydrolysis of furin and 3CLpro cleavage sites that augment infection. Non-RBD and non-interfacial mutations assist the S-protein in adopting thermodynamically favorable conformations for stronger binding. The driving forces of key mutations for Alpha, Beta, Gamma, Delta, Kappa, Lambda and Omicron variants, which stabilize the RBD-ACE2 complex, are investigated by free-energy computational approaches, as well as equilibrium and steered molecular dynamic simulations. Considered also are the structural hydropathy traits of the residues in the interface between SARS-CoV-2 RBD and ACE2 protein. Salt bridges and π-π interactions are critical forces that create stronger complexes between the RBD and ACE2. The trend of mutations is the replacement of non-polar hydrophobic interactions with polar hydrophilic interactions, which enhance binding of RBD with ACE2. However, this is not always the case, as conformational landscapes also contribute to a stronger binding. Arginine, the most polar and hydrophilic among the natural amino acids, is the most aggressive mutant amino acid for stronger binding. Arginine blockers, such as traditional sartans that bear anionic tetrazoles and carboxylates, may be ideal candidate drugs for retarding viral infection by weakening S-protein RBD binding to ACE2 and discouraging hydrolysis of cleavage sites. Based on our computational results it is suggested that a new generation of “supersartans”, called “bisartans”, bearing two anionic biphenyl-tetrazole pharmacophores, are superior to carboxylates in terms of their interactions with viral targets, suggesting their potential as drugs in the treatment of COVID-19. In Brief: This in silico study reviews our understanding of molecular driving forces that trigger mutations in the SARS-CoV-2 virus. It also reports further studies on a new class of “supersartans” referred to herein as “bisartans”, bearing two anionic biphenyltetrazole moieties that show potential in models for blocking critical amino acids of mutants, such as arginine, in the Delta variant. Bisartans may also act at other targets essential for viral infection and replication (i.e., ACE2, furin cleavage site and 3CLpro), rendering them potential new drugs for additional experimentation and translation to human clinical trials.     

Ribociclib Plus Letrozole in Patients with Hormone Receptor-positive,HER2-negative Advanced Breast Cancer with No Prior Endocrine Therapy: Subgroup Safety Analysis from The Phase 3b CompLEEment-1 Trial

BackgroundThe CDK4/6 inhibitor, ribociclib in combination with endocrine therapy significantly improved progression-free survival in the first line setting in post-menopausal patients with HR+/HER2− advanced breast cancer (ABC) in a pivotal phase 3, placebo-controlled trial (MONALEESA-2) and demonstrated superior overall survival in premenopausal patients with HR+/HER2− ABC (MONALEESA-7). The multinational, phase 3b, CompLEEment-1 trial, which assessed the safety and efficacy of ribociclib plus letrozole in a broader population of patients who have not received prior endocrine therapy for advanced disease, is the largest phase 3 clinical trial to date to evaluate the safety and efficacy of a CDK4/6 inhibitor. We report a subanalysis of data from patients (N = 339) enrolled in the central and south European countries of the SERCE (Southern Europe, RUC, Central Europe) cluster of CompLEEment-1.Patients and methodsMen and women of any menopausal status with HR+/HER2− ABC received once-daily oral ribociclib 600 mg (3-weeks on/1-week-off), plus letrozole 2.5 mg continuously. Men/premenopausal women also received a GnRH-agonist. The primary outcome was the number of patients with adverse events (AEs) over a timeframe of approximately 36 months. Time-to-progression, overall response rate, and clinical benefit rate were also measured.ResultsSafety results in the SERCE subgroup were consistent with those in the pivotal clinical trials of ribociclib in combination with endocrine therapy. Treatment-related AEs leading to dose adjustments/interruption occurred in 63.1% of patients but led to treatment discontinuation in only 10.6%. The most common treatment-related AEs of grade ≥ 3 were neutropenia and transaminase elevations. There were no fatal treatment-related events.ConclusionsThese findings from the SERCE subgroup support the safety and manageable tolerability of ribociclib in a broad range of patients with HR+/HER2− ABC more representative of patients in real-world clinical practice.Key words: CDK4/6 inhibitor, ribociclib, HR+, HER2−, advanced breast cancer, CompLEEment-1 trial     

Corifollitropin alfa compared with follitropin beta in GnRH-antagonist ovarian stimulation protocols in an unselected population undergoing IVF/ICSI

Recombinant DNA technologies have produced Corifollitropin alfa (CFa) used during IVF/ICSI in order to keep the circulating FSH levels above the threshold necessary to support multi-follicular growth for a week. In this prospective case-control study, we compared 70 participants treated with 150?μg CFa combined with 150?IU of follitropin beta (study group) with 70 subfertile participants with matching baseline characteristics, conforming with the same inclusion criteria and treated with an antagonist protocol using follitropin beta (control group). Live birth was the primary outcome, while secondary outcome measures were IVF/ICSI cycles characteristics, including adverse events and complications. Live birth was determined in reduced rates in the study compared to the control group, reaching statistical significance [6/70 versus 20/70, p?=?0.002], as also in the respective number of clinical pregnancies [9/70 versus 23/70, p?=?0.005], although the incidence of miscarriage was similar for both groups [6/70 versus 5/70, p?>?0.99]. Most of the secondary parameters examined were similar between groups. Logistic regression revealed that protocol and AFC had a direct impact on live birth. Ovarian stimulation with CFa does not seem to constitute an equally effective method as compared with follitropin beta to be offered in a general subfertile population seeking IVF/ICSI treatments.     

Methods of Preparation and Performance Evaluation of ABS/Mineral Microsphere Composites Produced through FDM and Compression Molding

The use of amorphous microspheres as filler in composites is promising due to their light weight, low cost, incombustibility, and the ability to alter relevant properties of the final composite. Contrary to glass spheres, perlite microspheres are much cheaper and can be tailor-made to facilitate purpose-oriented alteration of the final composite. We report the use of perlite microspheres for the preparation of: (1) composites, through a compression molding (hot pressing) technique; and (2) composite filaments, in a single screw extruder, as well as their use for sample printing through Fused Deposition Modeling (FDM). Proper characterization of the produced composites allows for their evaluation in terms of physical, thermal, and mechanical properties and with regards to the manufacturing technique, the filler fraction, and size. Composite samples of acceptable quality in terms of filler survival and dispersion as well as mechanical properties were produced through compression molding using fine expanded perlite microspheres (<90 μm) up to an infill ratio of 40 vol.%. Fine fillers (<90 μm) performed well in FDM, allowing printing of composite dogbone samples with a higher Young’s modulus and elongation and similar ultimate tensile strength compared to benchmark, up to an infill ratio of 20 vol.%. Composite samples present a slightly lower burning rate compared to those produced solely by ABS. Perlite microspheres present good workability in both applications, possessing satisfactory performance as filler in the composites, and can thus be assumed a promising multifunctional filler for various thermoplastics considering their low price, environmental impact, and fire rating.