Familial isolated unilateral large vestibular aqueduct syndrome

Large vestibular aqueduct syndrome (LVAS) is one of the most frequent inner ear malformations. It is associated with varying degrees of hearing loss, that may be progressive, sudden or fluctuant; nevertheless normal hearing in cases with LVAS has been described. Although unilateral LVAS has been described, all patients show clinical and radiological findings in both ears, in contrast to the family presented here, where 2 siblings are affected by unilateral sensorineural hearing loss associated with ipsilateral LVAS, with an autosomal recessive pattern. In order to search for the origin of this inner ear malformation, mutations in genes GJB2 (connexin-26 gene), PDS (Pendred's syndrome gene) and mitochondrial 12sRNA were studied, without positive results. In this paper we hypothesize the probable embryological origin for this malformation.     

Is secretory otitis media a single disease entity?

The outcome of 809 children who had middle ear effusion (MEE) was correlated with their age and medical history and the bacteriologic and cytologic findings of the MEE. Three groups emerged. Group A (n = 384) had a medical history of relatively recent acute otitis media (AOM) with a peak prevalence of 2.6 years of age, and its MEE was hypercellular (mostly polymorphonuclear leukocytes) with a 24% rate of positive bacteriologic culture. In contrast, the peak prevalence of group B (n = 280) was approximately 5 years of age. Its MEE followed no otologic medical history and was bacteriologically sterile with relatively few cells (mostly lymphocytes typical of viral infections). Group AB (n = 145) resembled group B except that they had a history of AOM some years before hearing loss onset. Altogether, the clinical features of group A are statistically distinguishable from those of groups B and AB in most respects. These findings explain the bimodal peak prevalence distribution that was found in many available epidemiological studies of secretory otitis media (SOM) and that was also seen in our data. It appears that SOM should neither be termed nor treated as an otitis media, but as a sequela of either bacterial AOM (group A) or of insidious, asymptomatic, probably viral otitis media (groups B and AB). Our data do not support antibiotic treatment for SOM (otitis media with effusion)--especially not in chronic cases.     

External apical root resorption in maxillary root-filled incisors after orthodontic treatment: a split-mouth design study

Introduction: The purpose of this study was to compare, in a split mouth design, the external apical root resorption (EARR) associated with orthodontic treatment in root-filled maxillary incisors and their contralateral teeth with vital pulps. Methodology: The study sample consisted of 38 patients (14 males and 24 females), who had one root-filled incisor before completion of multiband/bracket orthodontic therapy for at least 1 year. For each patient, digital panoramic radiographs taken before and after orthodontic treatment were used to determine the root resortion and the proportion of external root resorption (PRR), defined as the ratio between the root resorption in the endodontically treated incisor and that in its contralateral incisor with a vital pulp. The student’s t-test, chi-square test and logistic regression analysis were used to determine statistical significance. Results: There was no statistically significant difference (p > 0.05) between EARR in vital teeth (1.1 ± 1.0 mm) and endodontically treated incisors (1.1 ± 0.8 mm). Twenty-six patients (68.4%) showed greater resorption of the endodontically treated incisor than its homolog vital tooth (p > 0.05). The mean and standard deviation of PPR were 1.0 ± 0.2. Multivariate logistic regression suggested that PRR does not correlate with any of the variables analyzed. Conclusions: There was no significant difference in the amount or severity of external root resorption during orthodontic movement between root-filled incisors and their contralateral teeth with vital pulps. Key words:Endodontics, orthodontics, root canal treatment, root resorption.     

Sickle cell disease does not predispose to caries or periodontal disease

This study investigated the prevalence of dental caries and periodontal condition in a population with sickle cell disease (SCD), analyzing some associations with disease severity. The Decayed, Missing and Filled Teeth index (DMFT) and Community Periodontal Index (CPI) were recorded for 99 individuals with SCD and 91 matched controls. Socio-demographic status, oral health behaviors, and history of clinical severity of SCD were assessed. Statistical comparisons were performed between the group with SCD and the control group, as well as multivariate logistic regression analyses with DMFT index and CPI as the dependent variables. The mean number of decayed teeth was significantly higher in individuals with HbSS. Older age, female gender, and daily smoking were identified as risk factors for higher DMFT, while older age and absence of daily use of dental floss were risk factors for the development of periodontal disease. In conclusion, risk factors known to cause caries and periodontal disease had more influence on oral health than the direct impact of SCD.     

Foreign body ingestion during dental implant procedures

Two cases of swallowing of foreign material related to dental implants during dental practice are described. A conservative approach by clinical-radiographic follow-up was performed in both cases; however, one of the patients required colonoscopy under general anesthesia for the removal of the impacted foreign body from the intestinal region. These complications not only have associated economic cost but also carry the risk of malpractice litigation against the professional; thus, the surgeon was responsible for all the costs of hospital and surgery management of this case. Details of the clinical signs, radiographic examinations, type of treatment, and follow-up are presented.     

Discovery of putative salivary biomarkers for Sjögren's syndrome using high resolution mass spectrometry and bioinformatics

The purpose of the current study was to determine if saliva contains biomarkers that can be used as diagnostic tools for Sj?gren's syndrome (SjS). Twenty seven SjS patients and 27 age-matched healthy controls were recruited for these studies. Unstimulated glandular saliva was collected from the Wharton's duct using a suction device. Two μl of salvia were processed for mass spectrometry analyses on a prOTOF 2000 matrix-assisted laser desorption/ionization orthogonal time of flight (MALDI O-TOF) mass spectrometer. Raw data were analyzed using bioinformatic tools to identify biomarkers. MALDI O-TOF MS analyses of saliva samples were highly reproducible and the mass spectra generated were very rich in peptides and peptide fragments in the 750-7,500 Da range. Data analysis using bioinformatic tools resulted in several classification models being built and several biomarkers identified. One model based on 7 putative biomarkers yielded a sensitivity of 97.5%, specificity of 97.8% and an accuracy of 97.6%. One biomarker was present only in SjS samples and was identified as a proteolytic peptide originating from human basic salivary proline-rich protein 3 precursor. We conclude that salivary biomarkers detected by high-resolution mass spectrometry coupled with powerful bioinformatic tools offer the potential to serve as diagnostic/prognostic tools for SjS.     

Maxillary Sinus Augmentation Using Prehydrated Corticocancellous Porcine Bone: Hystomorphometric Evaluation after 6 Months

Background: Insufficient alveolar bone height often prevents the placement of standard dental implants in the posterior part of edentulous maxilla. In order to increase adequately the vertical dimension of the reabsorbed alveolar process, a sinus lift procedure is often necessary. The aim of this study was to evaluate histologic results of a prehydrated corticocancellous porcine bone used in maxillary sinus augmentation. Methods: Patients (age 18–70 years) with a residual bone height requiring a maxillary sinus augmentation procedure to place dental implants were eligible for this study. All patients were treated with the same surgical technique consisting of sinus floor augmentation via a lateral approach. The space obtained by elevation of the mucosa wall was grafted with prehydrated and collagenated corticocancellous porcine bone. Biopsies were harvested 6 months after the augmentation procedures. Results: Twenty‐four patients were enrolled. The mean percentage of new formed bone was 43.9 ± 18.6% (range 7.5–100%), whereas the mean percentage of residual graft material was 14.2 ± 13.6% (range 0–41.9%). The new bone/residual graft material ratio in the maxillary sinuses was 3.1. The mean soft tissues percentage was 41.8 ± 22.7% (range 0–92.5%). Conclusion: The present study suggested that porcine bone showed excellent osteoconductive properties and could be used successfully for sinus augmentation. Moreover, the porcine bone showed a high percentage of reabsorption after 6 months; this might be because of the presence of collagen and the porosity of the graft material.     

Resistance to bond degradation between dual-cure resin cements and pre-treated sintered CAD-CAM dental ceramics

Objective: To evaluate the bond stability of resin cements when luted to glass-reinforced alumina and zirconia CAD/CAM dental ceramics. Study design: Eighteen glass-infiltrated alumina and eighteen densely sintered zirconia blocks were randomly conditioned as follows: Group 1: No treatment; Group 2: Sandblasting (125 µm Al2O3-particles); and Group 3: Silica-coating (50 µm silica-modified Al2O3-particles). Composite samples were randomly bonded to the pre-treated ceramic surfaces using different resin cements: Subgroup 1: Clearfil Esthetic Cement (CEC); Subgroup 2: RelyX Unicem (RXU); and Subgroup 3: Calibra (CAL). After 24 h, bonded specimens were cut into 1 ± 0.1 mm2 sticks. One-half of the beams were tested for microtensile bond strength (MTBS). The remaining one-half was immersed in 10 % NaOCl aqueous solution (NaOClaq) for 5 h before testing. The fracture pattern and morphology of the debonded surfaces were assessed with a field emission gun scanning electron microscope (FEG-SEM). A multiple ANOVA was conducted to analyze the contributions of ceramic composition, surface treatment, resin cement type, and chemical challenging to MTBS. The Tukey test was run for multiple comparisons (p < 0.05). Results: After 24 h, CEC luted to pre-treated zirconia achieved the highest MTBS. Using RXU, alumina and zirconia registered comparable MTBS. CAL failed prematurely, except when luted to sandblasted zirconia. After NaOClaq storage, CEC significantly lowered MTBS when luted to zirconia or alumina. RXU decreased MTBS only when bonded to silica-coated alumina. CAL recorded 100 % of pre-testing failures. Micromorphological alterations were evident after NaOClaq immersion. Conclusions: Resin-ceramic interfacial longevity depended on cement selection rather than on surface pre-treatments. The MDP-containing and the self-adhesive resin cements were both suitable for luting CAD/CAM ceramics. Despite both cements being prone to degradation, RXU luted to zirconia or untreated or sandblasted alumina showed the most stable interfaces. CAL experimented spontaneous debonding in all tested groups. Key words:CAD/CAM ceramic, alumina, zirconia, resin cement, surface pre-treatment, sandblasting, silica-coating, chemical aging, bond degradation, microtensile bond strength.     

Determining efficacy of monitoring devices on ceramic bond to resin composite

Objectives: This paper aims to assess the effectiveness of 3D nanoroughness and 2D microroughness evaluations, by their correlation with contact angle measurements and shear bond strength test, in order to evaluate the effect of two different acids conditioning on the bonding efficacy of a leucite-based glass-ceramic to a composite resin. Study Design: Ceramic (IPS Empress) blocks were treated as follows: 1) no treatment, 2) 37% phosphoric acid (H3PO4), 15 s, 3) 9% hydrofluoric acid (HF), 5 min. Micro- and nano-roughness were assessed with a profilometer and by means of an atomic force microscopy (AFM). Water contact angle (CA) measurements were determined to assess wettability of the ceramic surfaces with the asixymetric drop shape analysis contact diameter technique. Shear bond strength (SBS) was tested to a resin composite (Z100) with three different adhesive systems (Scotchbond Multipurpose Plus, Clearfil New Bond, ProBOND). Scanning electron microscopy (SEM) images were performed. Results: Nanoroughness values assessed in 50x50 μm areas were higher for the HF group, these differences were not detected by profilometric analysis. HF treatment created the nano- roughest surfaces and the smallest CA (p<0.05), producing the highest SBS to the composite resin with all tested adhesive systems (p<0.05). No differences existed between the SBS produced by the adhesive systems evaluated with any of the surface treatments tested. Conclusions: Nano-roughness obtained in a 50x50 µm scan size areas was the most reliable data to evaluate the topographical changes produced by the different acid treatments on ceramic surfaces. Key words:Dental ceramic, acid etching, bonding efficacy, resin composite, adhesive systems, contact angle, roughness.