Activated polyurethane modified with latent thiol groups

A novel type of modified polyurethane with pendant acetylthio groups (as a latent form of thiol groups) has been proposed for the use in surface modifications with various biomolecules. The polymer was prepared via a modified variant of low-temperature bromoalkylation of urethane hard segments followed by the reaction of pendant bromoalkyl groups with thiolacetic acid in mild conditions. The extent of modification with acetylthio groups can be made as high as 0.45 mmol/g. After deprotection of acetylthio groups and reaction of the resulting thiol groups with an excess of Ellman's reagent, 0.1 nmol/cm(2) of thiol-reactive 3-carboxy-4-nitrophenyldithio groups were detected on the surface of films cast from the modified polymer. A sensitive fluorescent probe--dansyl-L-cysteine was used for the quantification of thiol-reactive groups bound to the surface. The acetylthio-modified polyurethane is sufficiently stable to withstand conditions typical for the high-temperature processing (molding, extrusion) of polyurethanes.     

Dosimetric effect of respiration-gated beam on IMRT delivery

Intensity modulated radiation therapy (IMRT) with a dynamic multileaf collimator (DMLC) requires synchronization of DMLC leaf motion with dose delivery. A delay in DMLC communication is known to cause leaf lag and lead to dosimetric errors. The errors may be exacerbated by gated operation. The purpose of this study was to investigate the effect of leaf lag on the accuracy of doses delivered in gated IMRT. We first determined the effective leaf delay time by measuring the dose in a stationary phantom delivered by wedge-shaped fields. The wedge fields were generated by a DMLC at various dose rates. The so determined delay varied from 88.3 to 90.5 ms. The dosimetric effect of this delay on gated IMRT was studied by delivering wedge-shaped and clinical IMRT fields to moving and stationary phantoms at dose rates ranging from 100 to 600 MU/min, with and without gating. Respiratory motion was simulated by a linear sinusoidal motion of the phantom. An ionization chamber and films were employed for absolute dose and 2-D dose distribution measurements. Discrepancies between gated and nongated delivery to the stationary phantom were observed in both absolute dose and 2-D dose distribution measurements. These discrepancies increased monotonically with dose rate and frequency of beam interruptions, and could reach 3.7% of the total dose delivered to a 0.6 cm3 ion chamber. Isodose lines could be shifted by as much as 3 mm. The results are consistent with the explanation that beam hold-offs in gated delivery allowed the lagging leaves to catch up with the delivered monitor units each time that the beam was interrupted. Low dose rates, slow leaf speeds and low frequencies of beam interruptions reduce the effect of this delay-and-catch-up cycle. For gated IMRT it is therefore important to find a good balance between the conflicting requirements of rapid dose delivery and delivery accuracy.     

Polyesters prepared by polycondensation in the presence of carbodiimides, 2. On the reaction of methyl α-(S)-malate with N,N′-dicyclohexylcarbodiimide under mild conditions

The reaction of methyl α-(S)-malate with N,N′-dicyclohexylcarbodiimide in the presence of amines under mild conditions was studied. It was established that in solvents with weak donor properties, N-acyl derivatives are preferentially formed instead of ester condensation products. An optically active polymer fraction was separated by precipitation in diethyl ether (yield up to 30%) with M?_n,GPC 1 000 to 4 000 and of low polydispersity M?_w/M?_n = 1,1–1,4. The method permits the preparation of optically active biodegradable condensation products with controlled molecular structure.     

Anionic polymerization of unsaturated aldehydes initiated by anion-radicals of aromatic carbonyl compounds

The capacity of anion-radicals of aromatic ketones to initiate polymerization of acrolein, methacrolein and crotonic aldehyde is studied. It is established with the aid of spectral and chemical methods that the polymerization is initiated mainly by electron transfer to the monomer.     

Molecular mechanism of kNBC1–carbonic anhydrase II interaction in proximal tubule cells

We have recently shown that carbonic anhydrase II (CAII) binds in vitro to the C-terminus of the electrogenic sodium bicarbonate cotransporter kNBC1 (kNBC1-ct). In the present study we determined the molecular mechanisms for the interaction between the two proteins and whether kNBC1 and CAII form a transport metabolon in vivo wherein bicarbonate is transferred from CAII directly to the cotransporter. Various residues in the C-terminus of kNBC1 were mutated and the effect of these mutations on both the magnitude of CAII binding and the function of kNBC1 expressed in mPCT cells was determined. Two clusters of acidic amino acids, L⁹⁵⁸DDV and D⁹⁸⁶NDD in the wild-type kNBC1-ct involved in CAII binding were identified. In both acidic clusters, the first aspartate residue played a more important role in CAII binding than others. A significant correlation between the magnitude of CAII binding and kNBC1-mediated flux was shown. The results indicated that CAII activity enhances flux through the cotransporter when the enzyme is bound to kNBC1. These data are the first direct evidence that a complex of an electrogenic sodium bicarbonate cotransporter with CAII functions as a transport metabolon.     

Attenuation of intracavitary applicators in 192Ir-HDR brachytherapy

Unlike the penetrating monoenergetic 662 keV gamma rays emitted by 137Cs LDR sources, the spectrum of 192Ir used in HDR brachytherapy contains low-energy components. Since these are selectively absorbed by the high-atomic number materials of which intracavitary applicators are made, the traditional neglect of applicator attenuation can lead to appreciable dose errors. We investigated the attenuation effects of a uterine applicator, and of a set of commonly used vaginal cylinders. The uterine applicator consists of a stainless steel source guide tube with a wall thickness of 0.5 mm and a density of 8.02 g/cm3, whereas the vaginal cylinders consist of the same stainless steel tube plus concentric polysulfone cylinders with a radius of 1 or 2 cm and a density of 1.40 g/cm3. Monte Carlo simulations were performed to compute dose distributions for a bare 192Ir-HDR source, and for the same source located within the applicators. Relative measurements of applicator attenuation using ion-chambers (0.125 cm3) confirmed the Monte Carlo results within 0.5%. We found that the neglect of the applicator attenuation overestimates the dose along the transverse plane by up to 3.5%. At oblique angles, the longer photon path within applicators worsens the error. We defined attenuation-corrected radial dose and anisotropy functions, and applied them to a treatment having multiple dwell positions inside a vaginal cylinder.     

Drosophila dSAP18 is a nuclear protein that associates with chromosomes and the nuclear matrix, and interacts with pinin, a protein factor involved in RNA splicing

SAP18 is a highly conserved protein that was proposed to be involved in multiple cellular processes from autophagy to gene regulation and mRNA processing. In this paper we show that, in Drosophila, dSAP18 is a predominantly nuclear protein that associates to both chromosomes and the nuclear matrix. dSAP18 becomes nuclear early during development, at the onset of cellularization, and remains so all through embryo development. dSAP18 is also nuclear in salivary glands, ovaries and cultured S2 cells. Here we also show that dSAP18 forms a complex with the Drosophila homolog of pinin (dPnn), a protein factor involved in mRNA splicing. dSAP18-dPnn interaction was confirmed in vivo, through co-immunoprecipitation experiments, as well as in vitro, through GST pull-down assays. These results are discussed in the context of the possible functions played by SAP18.     

Platelets and anticoagulant capacity in patients with inflammatory bowel disease

Patients with inflammatory bowel disease (IBD) are susceptible to thromboembolic complications. Several mechanisms can be responsible, including abnormal regulation of coagulation activity, disturbances of fibrinolysis, inflammatory reactions and thrombocytosis. The aim of this study was to assess hemostatic alterations in these parameters during exacerbation of disease. We studied disease activity in 99 IBD patients receiving anti-inflammatory therapy, in relation to: procoagulant markers, i.e. prothrombin fragment F1 + 2 (F1 + 2), D-dimer and platelet count, anticoagulant markers, i.e. protein C, protein S and antithrombin, and a mediator of inflammation (IL-6). Coagulation activity and platelet count were increased during active disease in IBD patients compared with those in a state of remission. The IL-6 concentrations were positively correlated with disease activity and thrombocytosis in patients with ulcerative colitis, but no association with the anticoagulant capacity could be demonstrated except for a decrease in protein C during high disease activity.     

Smoking Cessation in the Chicago Coronary Prevention Evaluation Program

Quit-rates for cigarette smokers in a lifestyle intervention program aimed at reducing coronary risk were 24 percent for all participants and 34 percent for non-dropouts. Recidivism remained very low during participation in the program. Half of the smokers who quit did so after being in the program more than two years. These data suggest that while engaging in an effort to make other changes in lifestyle, many smokers can be helped to quit. Sustained antismoking efforts in the clinical practice of medicine can be expected to share these same positive aspects. While mass public health programs to eliminate smoking and prevent young people from taking up the habit are being developed, health practitioners can make a significant contribution by including vigorous efforts at smoking cessation as part of routine practice.