Synthesis and characterization of a novel controlled release zinc oxide/gentamicin–chitosan composite with potential applications in wounds care

Freshly prepared ZnO nanoparticles were incorporated into a chitosan solution in weight ratios ranging from 1:1 to 12:1. Starting from the ratio of 3:1 the chitosan solution was transformed into a gel with a high consistency, which incorporates 15 mL water for only 0.1 g solid substance. The powders obtained after drying the gel were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and thermal analysis (TG-DSC). The electronic (UV–vis), infrared (FTIR) and photoluminescence (PL) spectra were also recorded. ZnO particles were coated with gentamicin and incorporated into the chitosan matrix, to yield a ZnO/gentamicin–chitosan gel. The release rate of gentamicin was monitored photometrically. This ZnO/gentamicin–chitosan gel proved great antimicrobial properties, inhibiting Staphylococcus aureus and Pseudomonas aeruginosa growth in both planktonic and surface-attached conditions. The results indicate that the obtained composite can be used in cutaneous healing for developing improved wound dressings, which combine the antibacterial activity of all three components with the controlled release of the antibiotic. This wound dressing maintains a moist environment at the wound interface, providing a cooling sensation and soothing effect, while slowly releasing the antibiotic. The system is fully scalable to any other soluble drug, as the entire solution remains trapped in the ZnO–chitosan gel.     

Highly Porous and Ultra-Lightweight Aero-Ga2O3: Enhancement of Photocatalytic Activity by Noble Metals

A new type of photocatalyst is proposed on the basis of aero-β-Ga₂O₃, which is a material constructed from a network of interconnected tetrapods with arms in the form of microtubes with nanometric walls. The aero-Ga₂O₃ material is obtained by annealing of aero-GaN fabricated by epitaxial growth on ZnO microtetrapods. The hybrid structures composed of aero-Ga₂O₃ functionalized with Au or Pt nanodots were tested for the photocatalytic degradation of methylene blue dye under UV or visible light illumination. The functionalization of aero-Ga₂O₃ with noble metals results in the enhancement of the photocatalytic performances of bare material, reaching the performances inherent to ZnO while gaining the advantage of the increased chemical stability. The mechanisms of enhancement of the photocatalytic properties by activating aero-Ga₂O₃ with noble metals are discussed to elucidate their potential for environmental applications.     

The Influence of MMA Esterification on Interfacial Adhesion and Mechanical Properties of Hybrid Kenaf Bast/Glass Fiber Reinforced Unsaturated Polyester Composites

The demand for natural fiber hybrid composites for various applications has increased, which is leading to more research being conducted on natural fiber hybrid composites due to their promising mechanical properties. However, the incompatibility of natural fiber with polymer matrix limits the performance of the natural fiber hybrid composite. In this research work, the mechanical properties and fiber-to-matrix interfacial adhesion were investigated. The efficiency of methyl methacrylate (MMA)-esterification treatments on composites’ final product performance was determined. The composite was prepared using the hand lay-up method with varying kenaf bast fiber (KBF) contents of 10, 15, 20, 25, 30, 35 (weight%) and hybridized with glass fiber (GF) at 5 and 10 (weight%). Unsaturated polyester (UPE) resin and methyl ethyl ketone peroxide (MEKP) were used as binders and catalysts, respectively. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) were used to examine the effects of MMA-esterification treatment on tensile strength and morphology (tensile fracture and characterization of MMA-esterification treatment) of the composite fabricated. The tensile strength of MMA-treated reinforced UPE and hybrid composites are higher than that of untreated composites. As for MMA treatment, 90 min of treatment showed the highest weight percent gain (WPG) and tensile strength of KBF-reinforced UPE composites. It can be concluded that the esterification of MMA on the KBF can lead to better mechanical properties and adhesion between the KFB and the UPE matrix. This research provides a clear reference for developing hybrid natural fibers, thus contributing to the current field of knowledge related to GF composites, specifically in transportation diligences due to their properties of being lightweight, superior, and involving low production cost.     

An MHV-68 Mutator Phenotype Mutant Virus,Confirmed by CRISPR/Cas9-Mediated Gene Editing of the Viral DNA Polymerase Gene,Shows Reduced Viral Fitness

Drug resistance studies on human γ-herpesviruses are hampered by the absence of an in vitro system that allows efficient lytic viral replication. Therefore, we employed murine γ-herpesvirus-68 (MHV-68) that efficiently replicates in vitro as a model to study the antiviral resistance of γ-herpesviruses. In this study, we investigated the mechanism of resistance to nucleoside (ganciclovir (GCV)), nucleotide (cidofovir (CDV), HPMP-5azaC, HPMPO-DAPy) and pyrophosphate (foscarnet (PFA)) analogues and the impact of these drug resistance mutations on viral fitness. Viral fitness was determined by dual infection competition assays, where MHV-68 drug-resistant viral clones competed with the wild-type virus in the absence and presence of antivirals. Using next-generation sequencing, the composition of the viral populations was determined at the time of infection and after 5 days of growth. Antiviral drug resistance selection resulted in clones harboring mutations in the viral DNA polymerase (DP), denoted Y383S^GCV, Q827R^HPMP-5azaC, G302W^PFA, K442T^PFA, G302W+K442T^PFA, C297W^HPMPO-DAPy and C981Y^CDV. Without antiviral pressure, viral clones Q827R^HPMP-5azaC, G302W^PFA, K442T^PFA and G302W+K442T^PFA grew equal to the wild-type virus. However, in the presence of antivirals, these mutants had a growth advantage over the wild-type virus that was moderately to very strongly correlated with antiviral resistance. The Y383S^GCV mutant was more fit than the wild-type virus with and without antivirals, except in the presence of brivudin. The C297W and C981Y changes were associated with a mutator phenotype and had a severely impaired viral fitness in the absence and presence of antivirals. The mutator phenotype caused by C297W in MHV-68 DP was validated by using a CRISPR/Cas9 genome editing approach.     

Characterisation at the Bonding Zone between Fly Ash Based Geopolymer Repair Materials (GRM) and Ordinary Portland Cement Concrete (OPCC)

In recent years, research and development of geopolymers has gained significant interest in the fields of repairs and restoration. This paper investigates the application of a geopolymer as a repair material by implementation of high-calcium fly ash (FA) as a main precursor, activated by a sodium hydroxide and sodium silicate solution. Three methods of concrete substrate surface preparation were cast and patched: as-cast against ordinary Portland cement concrete (OPCC), with drilled holes, wire-brushed, and left as-cast against the OPCC grade 30. This study indicated that FA-based geopolymer repair materials (GRMs) possessed very high bonding strength at early stages and that the behavior was not affected significantly by high surface treatment roughness. In addition, the investigations using scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) spectroscopy have revealed that the geopolymer repair material became chemically bonded to the OPC concrete substrate, due to the formation of a C–A–S–H gel. Fundamentally, the geopolymer network is composed of tetrahedral anions (SiO₄)⁴⁻ and (AlO₄)⁵⁻ sharing the oxygen, which requires positive ions such as Na⁺, K⁺, Li⁺, Ca²⁺, Na⁺, Ba²⁺, NH⁴⁺, and H₃O⁺. The availability of calcium hydroxide (Ca(OH)₂) at the surface of the OPCC substrate, which was rich in calcium ions (Ca²⁺), reacted with the geopolymer; this compensated the electron vacancies of the framework cavities at the bonding zone between the GRM and the OPCC substrate.     

Prospects for Electrical Performance Tuning in Ca3Co4O9 Materials by Metallic Fe and Ni Particles Additions

This work further explores the possibilities for designing the high-temperature electrical performance of the thermoelectric Ca₃Co₄O₉ phase, by a composite approach involving separate metallic iron and nickel particles additions, and by employing two different sintering schemes, capable to promote the controlled interactions between the components, encouraged by our recent promising results obtained for similar cobalt additions. Iron and nickel were chosen because of their similarities with cobalt. The maximum power factor value of around 200 μWm⁻¹K⁻² at 925 K was achieved for the composite with the nominal nickel content of 3% vol., processed via the two-step sintering cycle, which provides the highest densification from this work. The effectiveness of the proposed approach was shown to be strongly dependent on the processing conditions and added amounts of metallic particles. Although the conventional one-step approach results in Fe- and Ni-containing composites with the major content of the thermoelectric Ca₃Co₄O₉ phase, their electrical performance was found to be significantly lower than for the Co-containing analogue, due to the presence of less-conducting phases and excessive porosity. In contrast, the relatively high performance of the composite with a nominal nickel content of 3% vol. processed via a two-step approach is related to the specific microstructural features from this sample, including minimal porosity and the presence of the Ca₂Co₂O₅ phase, which partially compensate the complete decomposition of the Ca₃Co₄O₉ matrix. The obtained results demonstrate different pathways to tailor the phase composition of Ca₃Co₄O₉-based materials, with a corresponding impact on the thermoelectric performance, and highlight the necessity of more controllable approaches for the phase composition tuning, including lower amounts and different morphologies of the dispersed metallic phases.     

Intraspecific phylogenetic analysis of Siberian woolly mammoths using complete mitochondrial genomes

We report five new complete mitochondrial DNA (mtDNA) genomes of Siberian woolly mammoth (Mammuthus primigenius), sequenced with up to 73-fold coverage from DNA extracted from hair shaft material. Three of the sequences present the first complete mtDNA genomes of mammoth clade II. Analysis of these and 13 recently published mtDNA genomes demonstrates the existence of two apparently sympatric mtDNA clades that exhibit high interclade divergence. The analytical power afforded by the analysis of the complete mtDNA genomes reveals a surprisingly ancient coalescence age of the two clades, approximately 1-2 million years, depending on the calibration technique. Furthermore, statistical analysis of the temporal distribution of the (14)C ages of these and previously identified members of the two mammoth clades suggests that clade II went extinct before clade I. Modeling of protein structures failed to indicate any important functional difference between genomes belonging to the two clades, suggesting that the loss of clade II more likely is due to genetic drift than a selective sweep.     

Circulating interleukin-6 is associated with disease progression,but not cachexia in pancreatic cancer

Background

Cachexia is a wasting syndrome characterized by involuntary loss of >5% body weight due to depletion of adipose and skeletal muscle mass. In cancer, the pro-inflammatory cytokine interleukin-6 (IL-6) is considered a mediator of cachexia and a potential biomarker, but the relationship between IL-6, weight loss, and cancer stage is unknown. In this study we sought to evaluate IL-6 as a biomarker of cancer cachexia while accounting for disease progression.

Intracellular energetic units in healthy and diseased hearts

BACKGROUND:

The present review examines the role of intra-cellular compartmentation of energy metabolism in vivo.

OBJECTIVE:

To compare the kinetics of the activation of mitochondrial respiration in skinned cardiac fibres by exogenous and endogenous adenine nucleotides in dependence of the modulation of cellular structure and contraction.

METHODS:

Saponin-permeabilized cardiac fibres or cells were analyzed using oxygraphy and confocal microscopy.

RESULTS:

Mitochondria respiration in fibres or cells was upregulated by cumulative additions of ADP to the medium with an apparent K_m of 200 μM to 300 μM. When respiration was stimulated by endogenous ADP produced by intracellular ATPases, a near maximum respiration rate was achieved at an ADP concentration of less than 20 μM in the medium. A powerful ADP-consuming system, consisting of pyruvate kinase and phosphoenolpyruvate, that totally suppressed the activation of respiration by exogenous ADP, failed to abolish the stimulation of respiration by endogenous ADP, but did inhibit respiration after the cells were treated with trypsin. The addition of up to 4 μM of free Ca²⁺ to the actively respiring fibres resulted in reversible hypercontraction associated with a decreased apparent K_m for exogenous ADP. These changes were fully abolished in fibres after the removal of myosin by KCl treatment.

CONCLUSIONS:

Mitochondria and ATPases, together with cytoskeletal proteins that establish the structural links between mitochondria and sarcomeres, form complexes – intracellular energetic units (ICEUs) – in cardiac cells. Within the ICEUs, the mitochondria and ATPases interact via specialized energy transfer systems, such as the creatine kinase- and adenylate kinase-phosphotransfer networks, and direct ATP channelling. Disintegration of the structure and function of ICEUs results in dyscompartmentation of adenine nucleotides and may represent a basis for cardiac diseases.