Comparative study of the corrosion behavior of peripheral stents in an accelerated corrosion model: experimental in vitro study of 28 metallic vascular endoprostheses

PURPOSE

Clinical cases of stent-fractures show that corrosion behavior might play a role in these fractures. Implanted in vivo, especially in combination with other implanted foreign materials, these metallic products are exposed to special conditions, which can cause a process of corrosion. Here, we aimed to test the corrosion potential of stents made of different materials in an in vitro setting.

METHODS

A total of 28 peripheral stents of different materials (nitinol, cobalt-chromium-nickel, tantalum, V4A) and surface treatments (electropolish, mechanical polish, no polish) were tested in vitro. Corrosion was accelerated by applying a constant voltage of 3.5 V and amperage of 1.16 mA in 0.9% NaCl.

RESULTS

Nitinol stents showed the lowest susceptibility to corrosion and the longest period without damage. The Memotherm II^® (BARD Angiomed^®) was the only stent that showed neither macroscopic nor microscopic damages. The worst performing material was cobalt-chromium-nickel, which showed corrosion damages about ten times earlier compared to nitinol. Considering the reasons for termination of the test, nitinol stents primarily showed length deficits, while V4A and tantalum stents showed fractures. Cobalt-chromium-nickel stents had multiple fractures or a complete lysis in equal proportions. When placed in direct contact, nitinol stents showed best corrosion resistance, regardless of what material they were combined with. In terms of polishing treatments, electropolished stents performed the best, mechanical-polished stents and those without polishing treatment followed.

CONCLUSION

The analysis of corrosion behavior may be useful to select the right stent fulfilling the individual needs of the patient within a large number of different stents.Congenital stenosis or volume decreasing processes due to accumulation of tissues or by outside pressures are the most common indications for vascular interventional therapies. After the initial “cardiac catheterization” by Forssmann et al. (1) in 1929, percutaneous interventional techniques for treatment of vasoconstricting processes was continued constantly, whereby the use of permanent mechanical stents has gained an increasingly important role.Stents used in clinical practice should fulfill certain conditions to achieve an un-problematic application as well as an optimal result. The following properties apply to this ideal: good biocompatibility, low shortening, high-density in X-ray, high patency rates, low thrombogenicity, rapid endothelialization without excessive intimal hyperplasia, high flexibility and longitudinal elasticity, sufficient pressure stability at high centrifugal force, technical ability to secure application and exact positioning, and good expansion ratio for safe percutaneous application also with larger prostheses (2, 3). With the approval of stents for clinical use in 1986, the use of stents in peripheral vessels was also practiced on human patients. Palmaz et al. (4) published the first results of the clinical use in 1988 in one of the first multicenter trials on the use of stents in stenosed atherosclerotic iliac arteries. After the successful development of Palmaz^® stents and Wallstents^® as prototypes of balloon-expandable and self-expanding stents, a variety of new stents have been developed.The stents used today are made of different materials. These include nickel titanium alloys (nitinol), surgical stainless steel (V4A), tantalum, and cobalt compounds. Implanted in the human body, especially in combination with other implanted foreign materials, these metallic products are exposed to special conditions causing a process of corrosion. The higher the ionic conductivity of a liquid is, the faster the reaction. For this reason, liquids that contain a high proportion of electrolytes, such as blood with its high proportion of NaCl, cause much faster corrosion of materials (5).We aimed to perform a comparative study regarding the corrosion behavior of peripheral stents, to reffect the behavior of implanted stents in patients and contribute to find a safer indication in the selection of vascular prostheses. Likewise, we tested the hypothesis that the polishing process influences their corrosion behavior.     

Adverse effects of irreversible electroporation of malignant liver tumors under CT fluoroscopic guidance: a single-center experience

PURPOSE

We aimed to describe the frequency of adverse events after computed tomography (CT) fluoroscopy-guided irreversible electroporation (IRE) of malignant hepatic tumors and their risk factors.

METHODS

We retrospectively analyzed 85 IRE ablation procedures of 114 malignant liver tumors (52 primary and 62 secondary) not suitable for resection or thermal ablation in 56 patients (42 men and 14 women; median age, 61 years) with regard to mortality and treatment-related complications. Complications were evaluated according to the standardized grading system of the Society of Interventional Radiology. Factors influencing the occurrence of major and minor complications were investigated.

RESULTS

No IRE-related death occurred. Major complications occurred in 7.1% of IRE procedures (6/85), while minor complications occurred in 18.8% (16/85). The most frequent major complication was postablative abscess (4.7%, 4/85) which affected patients with bilioenteric anastomosis significantly more often than patients without this condition (43% vs. 1.3%, P = 0.010). Bilioenteric anastomosis was additionally identified as a risk factor for major complications in general (P = 0.002). Minor complications mainly consisted of hemorrhage and portal vein branch thrombosis.

CONCLUSION

The current study suggests that CT fluoroscopy-guided IRE ablation of malignant liver tumors may be a relatively low-risk procedure. However, patients with bilioenteric anastomosis seem to have an increased risk of postablative abscess formation.About 70% of hepatic metastases are nonresectable because of their anatomic location, the presence of comorbidities, or limited hepatic functional reserve (1). In these patients and in case of nonresectable primary liver tumors, percutaneous thermal ablation procedures, such as radiofrequency (RF) and microwave ablation, have become effective tools for treating hepatic malignancies (2–4). However, the effectiveness of RF and microwave treatment may be limited, either because of thermal damage to temperature-sensitive structures located in close proximity to the target tissue (5) or because of incomplete ablation of tumors adjacent to major hepatic vessels due to a phenomenon commonly termed “heat-sink effect” (6–10) which describes the loss of the applied thermal energy through the blood flow in those major vessels, whereby the effective energy application remains inadequate to ablate the target lesion.Irreversible electroporation (IRE) is a theoretically nonthermal ablation technique that delivers a series of high-voltage millisecond electrical pulses to the surrounding tissue, thus leading to irreversible disruption of the integrity of cell membranes and subsequent cell death by apoptosis (11–14). IRE may overcome the problems raised with thermal ablation: previous animal studies reported that bile ducts, blood vessels, nerves, and connective tissues are affected by IRE; however, regeneration is possible to some extent due to preservation of the tissue architecture (12, 13, 15–19). Moreover the feasibility of inducing cell death up to a vessel wall without any perivascular sparing was shown with IRE (12, 13, 18). The safety of IRE in the treatment of humans has been described (20). First reports have described potential complications after IRE, such as hemorrhage requiring blood transfusion (1.2%, two of 167 ablation procedures), portal vein thrombosis (3.2%, one of 31 ablation procedures), injury to bile ducts (1.8%, three of 167 ablation procedures), and infection (3.6%, six of 167 ablation procedures) (21, 22). However, few data are available for evaluating the potential risk factors associated with the occurrence of post-IRE complications.The purpose of this study was to review the frequency of mortality and morbidity after computed tomography (CT) fluoroscopy-guided liver IRE conducted at a single center and assess the factors influencing the occurrence of major complications.     

Comparison of conventional radiography and MDCT in suspected scaphoid fractures

AIM: To determine the diagnostic accuracy and radiation dose of conventional radiography and multidetector computed tomography(MDCT) in suspected scaphoid fractures.METHODS: One hundred twenty-four consecutive patients were enrolled in our study who had suffered from a wrist trauma and showed typical clinical symptoms suspicious of an acute scaphoid fracture. All patients had initially undergone conventional radiography. Subsequent MDCT was performed within 10 d because of persisting clinical symptoms. Using the MDCT data as the reference standard, a fourfold table was used to classify the test results. The effective dose and impaired energy were assessed in order to compare the radiation burden of the two techniques. The Wilcoxon test was performed to compare the two diagnostic modalities.RESULTS: Conventional radiography showed 34 acute fractures of the scaphoid in 124 patients(42.2%). Subsequent MDCT revealed a total of 42 scaphoid fractures. The sensitivity of conventional radiography for scaphoid fracture detection was 42.8% and its specificity was 80% resulting in an overall accuracy of 59.6%. Conventional radiography was significantly inferior to MDCT(P < 0.01) concerning scaphoidfracture detection. The mean effective dose of MDCT was 0.1 m Sv compared to 0.002 m Sv of conventional radiography.CONCLUSION: Conventional radiography is insufficient for accurate scaphoid fracture detection. Regarding the almost negligible effective dose, MDCT should serve as the first imaging modality in wrist trauma.