Artificial Neural Network Modelling of the Effect of Vanadium Addition on the Tensile Properties and Microstructure of High-Strength Tempcore Rebars

In high-strength rebar, the various microstructures obtained by the Tempcore process and the addition of V have a complex effect on the strength improvement of rebar. This study investigated the mechanism of strengthening of high-strength Tempcore rebars upon the addition of vanadium through artificial neural network (ANN) modelling. Various V contents (0.005, 0.072 and 0.14 wt.%) were investigated, and a large amount of bainite and V(C, N) were precipitated in the core of the Tempcore rebar in the high-V specimens. In addition, as the V content increased, the number of these fine precipitates (10–30 nm) increased. The precipitation strengthening proposed by the Ashby–Orowan model is a major contributing factor to the yield-strength increase (35 MPa) of the Tempcore rebar containing 0.140 wt.% V. The ANN model was developed to predict the yield and tensile strengths of Tempcore rebar after the addition of various amounts of V and self-tempering at various temperatures, and it showed high reproducibility compared to the experimental values (R-square was 93% and the average relative error was 2.6%). ANN modelling revealed that the yield strength of the Tempcore rebar increased more significantly with increasing V content (0.01–0.2 wt.%.) at relatively high self-tempering temperatures (≥530 °C). These results provide guidelines for selecting the optimal V content and process conditions for manufacturing high-strength Tempcore rebars.     

Effects of Interleukin-17A on the Early Stages of Arterial Thrombosis in Mice

PurposeInterleukin (IL)-17A has been suggested to play a role in the growth and organization of thrombi. We examined whether IL-17A plays a role in the early stages of thrombosis and whether there are sex differences in the effects of IL-17A.Materials and MethodsWe performed a blinded, randomized, placebo-controlled study to compare time to thrombotic occlusion and sex differences therein between mice treated with IL-17A and those treated with saline using a ferric chloride-induced model. We also assessed thrombus histology, blood coagulation, and plasma levels of coagulation factors.ResultsTime to occlusion values did not differ between the IL-17A group and the control group (94.6±86.9 sec vs. 121.0±84.4 sec, p=0.238). However, it was significantly shorter in the IL-17A group of female mice (74.6±57.2 sec vs. 130.0±76.2 sec, p=0.032). In rotational thromboelastometry, the IL-17A group exhibited increased maximum clot firmness (71.3±4.5 mm vs. 66.7±4.7 mm, p=0.038) and greater amplitude at 30 min (69.7±5.2 mm vs. 64.5±5.3 mm, p=0.040) than the control group. In Western blotting, the IL-17A group showed higher levels of coagulation factor XIII (2.2±1.5 vs. 1.0±0.9, p=0.008), monocyte chemoattractant protein-1 (1.6±0.6 vs. 1.0±0.4, p=0.023), and tissue factor (1.5±0.6 vs. 1.0±0.5, p=0.003).ConclusionIL-17A plays a role in the initial st ages of arterial thrombosis in mice. Coagulation factors and monocyte chemoattractant protein-1 may be associated with IL-17A-mediated thrombosis.     

Friction Properties of Solid Lubricants with Different Multiwalled Carbon Nanotube Contents

Bushes are circular bearings that surround a shaft and help it rotate smoothly. In heavy equipment, bushes are coated with solid lubricants to reduce friction. Although the coating layer of the lubricant has a stable coefficient of friction (CoF), it is important that this should last for a long time. In this study, multiwalled carbon nanotubes (MWCNTs), which have a low CoF, were added to the lubricant to improve its performance. When 2.3 wt% MWCNTs were added to the polymer resin, the dynamic CoF (under a 29 N external load) decreased by 78% in relation to that of the resin without MWCNTs. As the MWCNT content increased, the roughness of the coating decreased, which reduced the CoF. Moreover, MWCNT addition increased the overall tensile strength owing to an increase in the bonding force between the resins. Under a high load of 20 tonnes (t), the MWCNT-based solid lubricant had a CoF of 0.05, lower than commercial MoS₂-based solid lubricants; this was maintained for more than 10,000 cycles in a bush and shaft test. With the MWCNT-based solid lubricant, a lubricating polymer film formed, even on worn bush surfaces. The CoF of the solid lubricant was reduced and the number of cycles with a constant CoF increased when MWCNTs were added owing to the formation of the lubricating polymer film.     

The microbiome of lung cancer tissue and its association with pathological and clinical parameters

Lung cancer is the primary cause of cancer-related deaths worldwide. Recently, although the microbiome has emerged as the key modulator of the carcinogenesis, it has not been evaluated in lung cancer. Here, we evaluated the microbial composition of lung cancer tissues according to the histologic type and genetic mutation, compared it with that of the adjacent normal lung tissues, and investigated the association between the lung microbiome and clinical parameters. We collected lung tissue samples from 162 patients with non-small cell lung cancer (NSCLC, 162 cancer and 54 adjacent normal tissues), surgically resected between January 2018 and December 2019, and analyzed their microbiome using 16S rRNA gene amplicon sequencing, the QIIME2 pipeline, and statistical analyses. NSCLC tissues had significantly lower alpha diversity than the normal tissues, and their microbial composition differed according to the histologic type and cancer genetic mutation. The genera Romboutsia, Novosphingobium, Acinetobacter, and Prevotella were significantly overrepresented in NSCLC tissues. Alpha diversity steadily declined from a normal to a more advanced stage, and microbial compositional differences were noted along with recurrence. Stenotrophomonas was the most predominant genus in the NSCLC tissues of patients with recurrence. The pathways related to the tricarboxylic acid cycle and L-glutamate and L-glutamine biosynthesis were predominant in adenocarcinoma, whereas those related to purine and pyrimidine nucleotide degradation and formaldehyde assimilation were predominant in squamous cell carcinoma. Our findings suggest that the altered lung cancer microbial composition might be associated with cancer initiation and/or progression.     

Inhibitory effects of the atypical antipsychotic,clozapine, on voltage-dependent K+ channels in rabbit coronary arterial smooth muscle cells

To investigate the adverse effects of clozapine on cardiovascular ion channels, we examined the inhibitory effect of clozapine on voltage-dependent K⁺ (Kv) channels in rabbit coronary arterial smooth muscle cells. Clozapine-induced inhibition of Kv channels occurred in a concentration-dependent manner with an half-inhibitory concentration value of 7.84 ± 4.86 µM and a Hill coefficient of 0.47 ± 0.06. Clozapine did not shift the steady-state activation or inactivation curves, suggesting that it inhibited Kv channels regardless of gating properties. Application of train pulses (1 and 2 Hz) progressively augmented the clozapine-induced inhibition of Kv channels in the presence of the drug. Furthermore, the recovery time constant from inactivation was increased in the presence of clozapine, suggesting that clozapine-induced inhibition of Kv channels is use (state)-dependent. Pretreatment of a Kv1.5 subtype inhibitor decreased the Kv current amplitudes, but additional application of clozapine did not further inhibit the Kv current. Pretreatment with Kv2.1 or Kv7 subtype inhibitors partially blocked the inhibitory effect of clozapine. Based on these results, we conclude that clozapine inhibits arterial Kv channels in a concentration- and use (state)-dependent manner. Kv1.5 is the major subtype involved in clozapine-induced inhibition of Kv channels, and Kv2.1 and Kv7 subtypes are partially involved.     

Can the patient pinpoint where the ingested fish bone is impacted?: A single-center,retrospective study

Among the plethora of foreign body impactions, fish bones are common examples that patients may struggle to properly disclose in clinical situations. This study investigated whether patients could pinpoint where the ingested fish bone was lodged. In addition, we investigated the differences between fish bone and other foreign bodies, the usefulness of computed tomography (CT), and the related risk factors for hospitalization. The cases of patients who underwent an endoscopic removal of fish bone between April 2008 and April 2020 were retrospectively reviewed. The clinical outcomes, X-ray scan, CT, and complications of each patient were investigated. A total of 96 patients were included in this study. The mean size of the impacted fish bone was 23.78 mm, and most were found in the upper esophagus (n = 38). There was a weak correlation between pain location and the actual lesion location (r = 0.419, P < .001). Compared to those of other foreign bodies, the location of impacted fish bones was different (P < .001), the X-ray detection rate of fish bones was lower (P < .001), and the complication incidence was higher (P = .030). CT (95.89%) showed higher sensitivity than X-ray scanning (11.24%) (P < .001). Foreign body size (P = .004) and door-to-endoscopy time (P = .029) were related to admission. Patients only managed to point out the approximate location of the ingested fish bone. CT detected fish bones well, but scans should include at least the entire esophagus instead of solely the area where pain is felt. Fish bone impaction has different clinical characteristics from other foreign bodies. Endoscopic removal without delay can reduce the admission rates.     

Methodology in Conventional Head and Neck Reconstruction Following Robotic Cancer Surgery: A Bridgehead Robotic Head and Neck Reconstruction

PurposeRobotic head and neck surgery is widespread nowadays. However, in the reconstruction field, the use of robotic operations is not. This article aimed to examine methodologies for conventional head and neck reconstruction after robotic tumor surgery in an effort to obtain further options for future reconstruction manipulations.Materials and MethodsA retrospective review of all patients who received head and neck robot surgery and conventional reconstructive surgery between October 2016 and September 2021.ResultsIn total, 53 cases were performed. 67.9% of the tumors were greater than 4 cm. Regarding defect size, 47.2% of the lesions were greater than 8 cm. In terms of TNM stage, stage 3 disease was recorded in 26.4% and stage 4 in 52.8%. To make a deep and narrow field wider, we changed the patient’s posture in pre-op field, additional dissection was done. We used radial forearm flap mostly (62.2%).ConclusionConventional head and neck reconstruction after robotic ENT cancer surgery is possible. One key step is to secure additional space in the deep and narrow space left after robotic surgery. For this, we opted for a radial forearm flap mostly. This can be performed as a bridgehead to perform robotic head and neck reconstruction.     

MR imaging of the alar ligament: morphologic changes during axial rotation of the head in asymptomatic young adults

OBJECTIVE:. The alar ligament plays a critical role in limiting the axial rotation of the head, the left alar ligament being stretched on rotation to the right and vice versa. The purposes of this study were to assess the usefulness of MR imaging in demonstrating the alar ligament and also to identify its morphologic changes during axial rotation of the head in asymptomatic young volunteers. DESIGN AND PATIENTS:. Twenty-two healthy volunteers participated in this study. All subjects underwent four series of contiguous fast spin echo density-weighted MR images with a 2 mm slice thickness including axial and coronal images with the head in neutral position, and coronal images with alternate head rotation to the right and left. The alar ligaments seen on each series of MR images were visually graded 0-2, and grade comparisons were performed between the four series of MR images. We also assessed the morphologic changes of the alar ligament on coronal images during axial rotation of the head. RESULTS:. Grade comparisons for the demonstration of the alar ligament revealed that each of three series of coronal images was statistically significantly better in grade than axial images. During axial rotation of the head, MR images showed rather constant morphologic changes of the alar ligament: elevation and wrapping of the contralateral alar ligament around the dens, associated with slightly upward movement of C1-C2 on that side. This wrap-around effect of the contralateral alar ligament in relation to the dens sometimes caused the apparent shortening of the alar ligament on that side. CONCLUSION:. Reliable assessment of the anatomy and function of the alar ligament can be achieved with MR imaging, preferably in coronal planes. MR imaging with the aid of a functional study may be a valuable imaging modality in the evaluation of alar ligament failure.     

Monotropein Improves Dexamethasone-Induced Muscle Atrophy via the AKT/mTOR/FOXO3a Signaling Pathways

The present study aimed to investigate the effects of monotropein (MON) on improving dexamethasone (DEX)-induced muscle atrophy in mice and C2C12 mouse skeletal muscle cells. The body weights, grip strengths, and muscle weights of mice were assessed. The histological change in the gastrocnemius tissues was also observed through H&E staining. The expression of myosin heavy chain (MyHC), muscle ring finger 1 (MuRF1), and muscle atrophy F-box (Atrogin1) and the phosphorylation of AKT, mTOR, and FOXO3a in the muscle tissues of mice and C2C12 myotubes were analyzed using Western blotting. MON improved muscle atrophy in mice and C2C12 myotubes by regulating catabolic states via the AKT/mTOR/FOXO3a signaling pathways, and enhanced muscle function by the increases of muscle mass and strength in mice. This suggests that MON could be used for the prevention and treatment of muscle atrophy in patients.     

Cumulative Recurrence Rate and Risk Factors for Recurrent Abdominal Wall Endometriosis after Surgical Treatment in a Single Institution

PurposeThis study aimed to evaluate the cumulative recurrence rate and risk factors for recurrent abdominal wall endometriosis (AWE) after surgical treatment.Materials and MethodsA retrospective cohort study was conducted at a single gynecological surgery center between January 2004 and December 2020. Patients who were surgically treated and followed up for at least 6 months after surgery were selected.ResultsEighteen patients with pathologically diagnosed AWE were included in this study. The median follow-up duration was 22.5 months (range, 6–106). The median age was 37 years (range, 22–48), and 33.3% of the patients were nulliparous. Among the patients included in our study, 55.6% complained of a mass with cyclic pain, and 27.8% had a palpable mass. In addition, 22.2% of patients experienced recurrence with 17.5±9.7 months of mean time to recurrence. The cumulative recurrence rates at 24 and 60 months after surgical treatment of AWE were 23.8% and 39.1%, respectively. There were no statistically significant risk factors for the recurrence of AWE, including postoperative medical treatment.ConclusionThe recurrence rate of AWE appears to be correlated with the follow-up duration. There was no statistically significant risk factor for the recurrence of AWE. Unlike ovarian endometriosis, postoperative hormonal treatment does not seem to lower the recurrence of AWE. The findings of the current study may help healthcare providers in counselling and managing patients with AWE.