Leaching and VOC Emission Tests of Polymer Composites Produced from Post-Consumer Waste in Terms of Application in the Construction Sector

One of the existing priorities of the European Union is to search for rational waste management and to keep such waste in the economic cycle, while meeting the highest safety requirements. The paper presents the results of environmental tests of composites based on the polyethylene (rPE) and polypropylene (rPP) matrix and reinforced with cellulose fibres (newsprint, NP). Raw materials were obtained by recycling post-consumer waste such as beverage bottles and newsprint. The composites were tested for their potential use as materials in cladding panels and acoustic barriers. Given that normative documents for these products do not define specific environmental requirements, the composites were tested for the release of dangerous substances, such as anions of inorganic compounds, heavy metals, volatile organic compounds (VOCs), and their impact on the environment. A detailed in-depth analysis of the mechanisms of release of substances (diffusion, dissolution, surface leaching and depletion) from the rPP/NP composite into surface water, groundwater and soil was carried out. In turn, emission of VOCs from the rPE (low-density:high-density (LD:HD)—50:50) and rPE (LD:HD—30:70) composites into indoor air was also carried out. Raw materials in the form of granulates and loose cellulose fibres, used to produce the composites, were also tested for their environmental impact.     

Sonographic findings in a neonate with cobb syndrome

Cobb syndrome (cutaneomeningospinal angiomatosis) is a rare phacomatosis characterized by vascular abnormality of the spinal cord associated with a vascular naevus at the same metamere. We report the case of a newborn with Cobb syndrome, diagnosed by sonography of the spine and later confirmed by MRI. In neonates and young infants with dermatomal cutaneous vascular abnormalities, sonography of the spine should be used as the first imaging modality. © 2012 Wiley Periodicals, Inc. J Clin Ultrasound, 2013     

Research on the Release of Dangerous Compounds from the BTEX and PAHs Groups in Industrial Casting Conditions

The assessment of the harmfulness of moulding and core sands is mainly based on investigations of compositions of gases emitted by liquid casting alloys during the mould pouring. The results of investigations of moulding sands obtained under industrial conditions are presented in this paper. A unique research stand was designed and built for this aim. It allowed us to determine emissions of gases at individual stages of casting a mass up to 50 kg. This approach enables simulation of foundry conditions. Moulding sands bound by organic binders (phenol-formaldehyde; furan), inorganic binders and green sand, were subjected to investigations. The composition of gases that evolved during the individual stages, pouring, cooling and knocking out, was tested each time, and the contents of Polycyclic Aromatic Hydrocarbons (PAHs) and benzene, toluene, ethylbenzene, and xylenes (BETX) were analysed. Investigations indicated that the emission of gases from sands with inorganic binders is negligible when compared with the emission of gases from sands with organic binders. The emission of gases from green sand is placed in the middle of the scale. As an example: the sand with furan resin emitted 84 mg of BTEX (in recalculation for 1 kg of sand) while from sands with inorganic binders there was a maximum of 2.2 mg (for 1 kg of sand). In the case of sands with inorganic binders, MI and MC sands indicated comparable and very low emissions of gases from the PAHs group, at the level of 0.018 mg and 0.019 mg for 1 kg of sand, respectively. The higher emission of PAHs from MG sand is the result of its different way of hardening (a binder was of an organic character) than of sands MI and MC.     

Variously Prepared Zeolite Y as a Modifier of ANFO

In the presented research, we investigated Ammonium Nitrate Fuel Oil (ANFO), with the addition of variously modified zeolite Y as an attractive explosive. Analysis of both blasting tests and thermodynamic models of blasting properties led to the conclusion that the addition of zeolite Y enhanced the detonation properties of such prepared ANFO via the growth of the detonation pressure, temperature, compression energy, and heat of the explosion. Generally, the modification of ANFO with variously prepared zeolite Y also reduced the volume of (CO_x + NO_x) post-blast fumes. Furthermore, it was found that the ANFO’s velocity of detonation (VOD) could be controlled by the choice of the way of zeolite Y modification. Namely, for zeolite Y without Mg, as well as Mg-Y prepared via the impregnation method, the VOD rose. The opposite effect was observed when ANFO was modified with Mg-Y, obtained from the deposition of Mg over zeolite Y via the ultrasonic-assisted procedure.     

An Investigation of the Thermal Transitions and Physical Properties of Semiconducting PDPP4T:PDBPyBT Blend Films

This work focuses on the study of thermal and physical properties of thin polymer films based on mixtures of semiconductor polymers. The materials selected for research were poly [2,5-bis(2-octyldodecyl)-pyrrolo [3,4-c]pyrrole-1,4(2H,5H)-dione-3,6-diyl)-alt-(2,2′;5′,2″;5″,2′′′-quater-thiophen-5,5′′′-diyl)]—PDPP4T, a p-type semiconducting polymer, and poly(2,5-bis(2-octyldodecyl)-3,6-di(pyridin-2-yl)-pyrrolo [3,4-c]pyrrole-1,4(2H,5H)-dione-alt-2,2′-bithiophene)—PDBPyBT, a high-mobility n-type polymer. The article describes the influence of the mutual participation of materials on the structure, physical properties and thermal transitions of PDPP4T:PDBPyBT blends. Here, for the first time, we demonstrate the phase diagram for PDPP4T:PDBPyBT blend films, constructed on the basis of variable-temperature spectroscopic ellipsometry and differential scanning calorimetry. Both techniques are complementary to each other, and the obtained results overlap to a large extent. Our research shows that these polymers can be mixed in various proportions to form single-phase mixtures with several thermal transitions, three of which with the lowest characteristic temperatures can be identified as glass transitions. In addition, the RMS roughness value of the PDPP4T:PDBPyBT blended films was lower than that of the pure materials.     

Harnessing tumorous flaws for immune supremacy: is miRNA-155 the weak link in breast cancer progression?

With the advent of immune checkpoint blockade (ICB) therapy, treatment strategies for late-stage cancers have seen a radical advancement. In this issue of the JCI, Wang et al. characterize the functional role of miR-155 in breast cancer and its potential in harnessing the efficacy of immunotherapy. The study reports that high expression levels of miR-155 in breast cancer cells downregulated suppressor of cytokine signaling 1 (SOCS1), increased the phosphorylated STAT1 (pSTAT1)/pSTAT3 ratio, and thereby stimulated chemoattractants for tumor infiltration of effector T cells. Moreover, miR-155 overexpression set the stage for ICB therapy via increased programmed death ligand 1 (PD-L1) expression on cancer cells and enhanced immunological memory response via the release of miR-155–containing extracellular vesicles. Collectively, these data suggest that miR-155 is a strong candidate as a prognostic biomarker for ICB therapy.     

Warm Mix Asphalt Binder Utilizing Water Foaming and Fluxing Using Bio-Derived Agent

The present paper investigates the effects of simultaneous mechanical foaming using water and fluxing with a bio-derived agent on the properties of three distinct asphalt binders: 50/70 paving-grade bitumen, 45/80–55 polymer-modified bitumen, and 45/80–80 highly modified asphalt binder. The testing involved classical tests for assessing binder consistency (penetration at 25 °C, ring and ball softening point, Fraass breaking point, and dynamic viscosity) as well as performance tests (high and low Superpave critical temperatures and multiple stress creep recovery). The tests included assessment directly after asphalt binder foaming and were repeated after a 14-day period. It was shown that bitumen foaming had only short-term effects on the asphalt binders, which did not persist in the repeated tests after 14 days. The fluxing agent that was utilized caused significant changes in the consistency of all asphalt binders. The changes in the performance characteristics of the 50/70 and 45/80–55 binders were severe and amounted to a significant decrease in high-temperature performance of these binders. On the other hand, an improvement in all performance characteristics in the case of the 45/80–80 asphalt binder was observed as a result of the applied processes, particularly when measured 14 days after foaming. This study shows that the simultaneous use of foaming and the fluxing additive decreased the dynamic viscosity of the 45/80–80 binder, while improving its properties relating the pavement performance.     

Spectrometric investigations in ocular hypertension and early stages of primary open angle glaucoma and of low tension glaucoma — multisubstance analysis

The approximation of logarithmic difference spectra between the reflectance of the normal fundus and the fundus reflectance in different stages of glaucoma is demonstrated by a model. The influences of fundus pigments like oxihemoglobin, melanin, xanthophyll and rhodopsin as well as the intensity and the exponent of the scattered light are optimized. Glaucomatous alterations in the extinction of these pigments and of the scattering parameters are different in the macula, in the papillo-macular bundle and in the parapapillary region temporal to the optic disc. A lack of oxihemoglobin only in the papillo-macular bundle in first relative losses in the visual field function points to a damaged microcirculation in early POAG. In progressive glaucoma the extinction spectrum of xanthophyll is detectable in the papillo-macular bundle. A decreased intensity of the scattered light and an altered scattering exponent are suggestive of a damage in the nerve fiber layer at early stages of glaucoma.     

Sympathetic denervation impairs epidermal healing in cutaneous wounds

The involvement of peripheral nerves in dermal wound healing, particularly in the inflammatory response has not been extensively studied. Therefore, this study was performed to examine the role of peripheral nerves in the healing of rat skin linear incisions. We report that chemical sympathectomy with 6-hydroxydopamine significantly impaired wound healing as measured on days 7, 11, and 14 postsurgery (by day 14, 48% of the sympathectomized rats were healed in contrast with 84% of the controls; p = 0.0104). In contrast, neonatal capsaicin treatment, which predominantly destroys sensory afferents, had no effect on wound healing ( p > 0.05 on all days). These results support the hypothesis that sympathetic efferents are important for wound healing. Unlike previous research, which showed that peripheral nerves influence ischemic skin flaps, we are the first to demonstrate a role for peripheral nerves in the healing of skin incisions. Because inflammation is an important step in cutaneous wound healing, we propose that a reduction of neurogenic inflammation caused by sympathectomy may explain the impaired wound healing that we observed in our study.