Root canal treatment in mandibular canines with two roots: a report of two cases

AIM: To highlight anatomical variation in the mandibular canine. SUMMARY: Two clinical case reports are presented to illustrate anatomical variation in the human mandibular canine. Endodontic treatment may sometimes fail because morphological features of the tooth adversely affect the treatment procedures. Many investigators have reported the anatomical variations associated with mandibular canines. Mandibular canines are recognized as usually having one root and one root canal in most cases, although approximately 15% may have two canals or sometimes two roots. This paper describes two clinical cases of mandibular canines with two roots and two canals. KEY LEARNING POINTS: Failure to control infection in the root canal system has an adverse impact on outcome. Clinicians should be aware of anatomical variations in the teeth they are managing, and should never assume that canal systems are simple. The majority of mandibular canines have one root and root canal, but 15% may have two canals, and a smaller number may have two distinct roots.     

The influence of bone mechanical properties and implant fixation upon bone loading around oral implants.

Finite element models were created to study the stress and strain distribution around a solitary BAnemark implant. The influence of a number of clinically relevant parameters was examined: bone-implant interface (fixed bond versus frictionless free contact), bone elastic properties, unicortical versus bicortical implant fixation and the presence of a lamina dura. Bone loading patterns in the vicinity of the implant seem to be very sensitive to these parameters. Hence they should be integrated correctly in numerical models of in vivo behaviour of oral implants. This necessitates the creation of patient-dependent finite element models.     

Delayed iliac abscess as an unusual complication of an iliac bone graft in an orthognathic case

The reconstruction of large maxillofacial defects generally requires harvesting bone from extra-oral sites. The main source of autogenous bone is the iliac crest. This donor site is used to obtain bone for augmentation in orthopaedic surgery, neurosurgery, and oral and maxillofacial surgery, where the main indications are secondary and tertiary osteoplasty in patients with cleft-lip and palate, reconstruction of bony defects after operations for tumours, and augmentation of severe atrophy of the alveolar crest in preprosthetic surgery. A review of the literature on complications following bone harvesting from the anterior iliac crest reveals persistent pain, nerve injury, haemorrhage, limping, persistent gait abnormalities, conspicuous scarring, bone contour alteration, infection, fracture, meralgia paraesthetica, peritonitis, and herniation. The authors report an unusual complication: a huge iliac abscess that appeared 4 years after bimaxillary surgery involving iliac bone grafts.     

EFFECT OF ACID ETCHING OF GLASS IONOMER CEMENT SURFACE ON THE MICROLEAKAGE OF SANDWICH RESTORATIONS

The purposes of this study were to evaluate the sealing ability of different glass ionomer cements (GICs) used for sandwich restorations and to assess the effect of acid etching of GIC on microleakage at GIC-resin composite interface. Forty cavities were prepared on the proximal surfaces of 20 permanent human premolars (2 cavities per tooth), assigned to 4 groups (n=10) and restored as follows: Group CIE – conventional GIC (CI) was applied onto the axial and cervical cavity walls, allowed setting for 5 min and acid etched (E) along the cavity margins with 35% phosphoric acid for 15 s, washed for 30 s and water was blotted; the adhesive system was applied and light cured for 10 s, completing the restoration with composite resin light cured for 40 s; Group CIN – same as Group CIE, except for acid etching of the CI surface; Group RME – same as CIE, but using a resin modified GIC (RMGIC); Group RMN – same as Group RME, except for acid etching of the RMGIC surface. Specimens were soaked in 1% methylene blue dye solution at 24°C for 24 h, rinsed under running water for 1 h, bisected longitudinally and dye penetration was measured following the ISO/TS 11405-2003 standard. Results were statistically analyzed by Kruskal-Wallis and chi-square tests (α=0.05). Dye penetration scores were as follow: CIE – 2.5; CIN – 2.5; RME – 0.9; and RMN – 0.6. The results suggest that phosphoric acid etching of GIC prior to the placement of composite resin does not improve the sealing ability of sandwich restorations. The RMGIC was more effective in preventing dye penetration at the GIC-resin composite- dentin interfaces than CI.     

Long-term outcome following treatment of multiple Miller class I and II recession defects in esthetic areas of the mouth

BACKGROUND: Multiple recession defects can be successfully treated using envelope-type coronally advanced flaps. The aim of the present study was to evaluate the long-term (5 years) stability of clinical outcomes achieved with the surgery and the association between patient variables and long-term stability. METHODS: Seventy-three Miller Class I and II gingival recessions affecting 22 young, systemically healthy subjects were treated with coronally advanced flaps with no releasing incisions. All patients were instructed to perform a coronally directed roll technique to minimize the toothbrushing trauma to the gingival margin. The clinical reevaluation was made 1 year after the surgery. At this point, 13 patients took part in a supportive periodontal care program consisting of oral hygiene instructions, control of toothbrushing technique, and professional tooth cleaning every 4 months. The remaining nine patients did not participate and received only sporadic care by general dentists. At 5 years post-surgery, all patients were reexamined. RESULTS: At the 5-year examination, 94% of the root surfaces initially exposed due to gingival recession were still covered with soft tissue, and 85% of the treated recession defects showed complete coverage. Complete root coverage in all recessions was maintained in 15 out of 22 patients (68%). The long-term stability of the soft-tissue margin in the treated sites was significantly influenced by the patient's regular participation in the recall program and the susceptibility to gingival recession in other areas of the mouth. A statistically significant increase of keratinized tissue (0.80 +/- 0.64 mm) was observed between the 1- and 5-year observation visits, and the average increase of keratinized tissue between the baseline and the 5-year follow-up amounted to 1.38 +/- 0.90 mm. This increase was significantly affected by the baseline keratinized tissue (KT) and recession (REC) depth: in particular, the 5-year increase in the amount of keratinized tissue was greater in sites with a greater recession depth and lower amount of keratinized tissue at baseline. CONCLUSIONS: 1) The successful root coverage results obtained with the coronally advanced flap for multiple recession defects were well maintained over the 4-year observation period. 2) Negative patient characteristics such as a lack of compliance with a supportive care program and individual susceptibility to gingival recession were significantly associated with the recurrence in gingival recession. 3) The increase in keratinized tissue height that followed the coronally advanced flap procedure may be attributed to the tendency of the mucogingival line to regain its genetically determined position.     

Immunolocalization of PTCH protein in odontogenic cysts and tumors

The human patched gene (PTCH) functions in both embryologic development and tumor suppression. PTCH mutations have been found in odontogenic keratocysts. However, the expression and localization of the protein product of the gene have not been determined in odontogenic tumors and cysts. We investigated 68 odontogenic lesions by immunohistochemistry, and compared their PTCH expression with that in basal cell carcinomas. All odontogenic lesions, including two keratocysts with truncating mutations, were positive for PTCH. Different types of lesions had different amounts of staining. Lack of staining was noted in the majority of basal cell carcinomas. Taken together, these data suggest that odontogenic keratocysts arise with heterozygous mutations of the PTCH gene.     

Influence of cement thickness and mechanical cycling on the push-out bond strength between posts and root dentin

The aim of this study was to assess the influence of mechanical cycling and cement thickness on the bond strength between fiber posts and root dentin. Forty bovine teeth were sectioned (16 mm) and randomly assigned to four groups (n = 10). Specimens in Groups 1 and 2 were cemented using a thinner cement layer, while specimens in Groups 3 and 4 were cemented using a thicker cement layer. Groups 2 and 4 were submitted to mechanical cycling. Four slices per specimen were produced and submitted to push-out testing. Bond strength values were not affected by mechanical cycling (P = 0.2893), although the thickness of the cement layer did affect bond strengths (P = 0.0059, thinner > thicker). Tukey's test showed that Group 1 (19.27 MPa) had a higher mean bond strength value than Group 3 (12.4 MPa) and Group 4 (13.6 MPa), while Group 2 (15.0 MPa) was statistically similar to all groups. These results indicate that a thicker cement layer negatively affected the push-out bond strength between a fiber post and root dentin, regardless of whether the specimens were subjected to mechanical cycling.     

Playing wind instruments as a potential aetiologic cofactor in external cervical resorption: two case reports

AIM: To present two cases of external cervical resorption (ECR) on maxillary incisors, in which the primary aetiologic factor is suggested to be pressure trauma by frequently playing wind instruments. SUMMARY: The exact aetiological spectrum of ECR is still poorly understood. For resorption to occur, a defect in the cementum layer (trigger) is a likely prerequisite. Whilst the mechanism for continuation (stimulus) is still unclear, knowledge of potential predisposing factors is important in assessing patients at risk. Pressure generated by playing wind instruments could present an aetiological factor in ECR because it affects the cervical region of the root surface. The cases that are presented may confirm this hypothesis and the extent of resorption defects is shown by cone-beam computer tomography (CT) and micro-focus CT imaging techniques.