Mortality risk associated with ejection fraction differs across resting nuclear perfusion findings.

BACKGROUND: Left ventricular ejection fraction (LVEF) is a significant predictor of morbidity and death. The nuclear summed rest score (SRS) measures myocardial perfusion defects and provides prognostic information, but its effects on long-term outcomes are not fully established. Moreover, information regarding the potential interaction between these 2 covariates is limited. The purpose of this study was to determine whether the mortality risk associated with LVEF is the same across all values of SRS in a population undergoing evaluation for ischemic heart disease. METHODS AND RESULTS: We examined 3,187 patients who underwent cardiac catheterization and perfusion single photon emission computed tomography imaging with a maximum follow-up of 8.1 years and median follow-up of 3.1 years. Cox proportional hazards modeling showed that increasing nuclear SRS and decreasing LVEF were independently associated with a higher long-term mortality rate, with a clinically significant interaction between them (P = .032). Patients with a normal LVEF and a high SRS (greater perfusion abnormality) have a prognosis similar to those with a reduced LVEF. CONCLUSIONS: Resting perfusion studies provide prognostic information for long-term survival and significantly impact the interpretation of mortality risk associated with changes in LVEF. Patient prognostication, risk stratification, and future research using these variables should take this interaction into account.     

BoneMorphing versus freehand localization of anatomical landmarks: consequences for the reproducibility of implant positioning in total knee arthroplasty.

OBJECTIVE: This study analyzed the influence of the acquisition method in image-free computer-assisted total knee arthroplasty (CAS-TKA), and the reproducibility of implant planning using BoneMorphing, a 3D morphometric model obtained by a 3D-to-3D elastic registration of statistical models to sparse point clouds acquired directly on the bone surface with a pointer. MATERIALS AND METHODS: Five surgeons (one expert, four trainees) each performed a CAS-TKA hybrid protocol based on morphometric models and landmarks on a cadaveric knee 10 times. In addition, several additional landmarks were digitized during each acquisition. The reproducibility of the implant positioning and sizing, as determined by an implant planning algorithm with morphometric models, was compared to direct digitization accuracy. RESULTS: Femoral and tibial implant positioning parameters with the hybrid protocol resulted in intra-surgeon standard deviations (SDs) of less than+/-1.4 degrees for rotation and 1.9 mm for translation for all surgeons in all directions except for tibial axial rotation (the only parameter determined by a digitized landmark and not recomputed in the 3D model). The variability in individual landmark digitization varied from 2 to 5 mm SD for certain landmarks, with ranges of 15-25 mm across all surgeons. The comparison study showed an improvement in femoral rotation reproducibility with the morphometric model when using the posterior condylar axis. Tibial implant reproducibility for each method was comparable, with the morphometric model giving better results in well-digitized areas such as the tibial plateau. CONCLUSION: A CAS-TKA protocol based on a deformed statistical model offers reproducible implant positioning. Some landmarks, such as distal condyles, show sufficient reproducibility in the direction of interest, while others, such as the anterior tibial tubercle, can lead to hazardous implant positioning. This should be taken into consideration when designing a CAS-TKA system with bony landmarks. In areas where a sufficient number of points have been digitized with good coverage, such as on the distal and posterior femoral condyles or the tibial plateau areas, the information derived from the 3D model is more accurate and reproducible than that derived from digitization. Good training and a guiding user interface are essential to guarantee coverage quality.     

Multipass Vector (Mpave) Technique with Nonablative Radiofrequency to Treat Facial and Neck Laxity

Background. Redundant facial and neck skin is a major feature of aging and historically has been corrected surgically. Recently, monopolar radiofrequency application has been introduced for nonablative tissue tightening of skin by volumetric heating of the deep dermis. It has been able to improve neck and cheek laxity and periorbital rhytides and to elevate eyebrows. However, questions remain as to the ideal parameters needed to optimize the use of radiofrequency.
Objective. To determine the safety and report on the efficacy of a radiofrequency application that involves a multipass vector (mpave) technique to target facial and neck skin laxity.
Methods. Twenty-five patients (skin types I to V) with mild to severe facial and neck laxity received one treatment session with monopolar radiofrequency. Treatment parameters, adverse events, and digital photographs were recorded. All patients were treated with a multipass vector technique consisting of four to five passes targeted over areas of skin that would most improve facial laxity. The multipass vector (mpave) treatment approach is described. Energy levels ranged from 62 to 91 J/cm2 per pulse.
Results. All patients experienced some immediate erythema and edema, which had completely resolved in most patients within 48 hours. No scarring or dyspigmentation was noted on follow-up at 6 and 12 weeks. Photographic analysis of pre- and post-treatment digital images revealed cosmetic improvement in facial and neck laxity in 96% of patients. The majority of patients demonstrated a moderate or better improvement. Stacked pulses in the submental region were shown to reduce fat.
Conclusions. The direct application of monopolar radiofrequency to facial and neck skin using a multipass vector (mpave) treatment approach was safely tolerated in patients of all skin types. Patient satisfaction correlated well with photographic analysis, and the technique was shown to be efficacious for most patients.     

A new Le Fort I internal distraction device in the treatment of severe maxillary hypoplasia.

PURPOSE: The purpose of this pilot study was to test a new Le Fort I internal distraction device. PATIENTS AND METHODS: A new internal Le Fort I distraction device designed by 1 of the authors was used in 3 patients with cleft lip and palate and severe maxillary hypoplasia who needed maxillary advancements in excess of 12 mm. Presurgical planning used CASSOS (SoftEnable Technology, Ltd, Hong Kong SAR, China) prediction tracing software and a stereolithographic model to calculate the distraction vector. The distractors were pre-bent and installed on the stereolithographic model and activated to advance the maxilla. Surgery was performed in a conventional manner, and distraction was started after a 7-day latency phase at the rate of 1 mm/day and continued until the presurgical plan was achieved. The distractor was removed after a 3-month consolidation phase. Cephalometric radiographs were taken at the completion of each phase. RESULTS: This new Le Fort I internal distraction device successfully distracted the maxillae as planned in all 3 patients. At the end of the distraction phase, the maxillary advancement was measured at 15.8 mm, 15.8 mm, and 13.5 mm, respectively. In each patient, a clockwise rotation of the maxilla was observed with a tendency to a posterior open bite. Postoperative radiographs also showed that the actual distraction vectors differed from the planned vectors. After the consolidation phase, radiographs showed a relapse of 2.6 mm, 0 mm, and 5.0 mm, respectively. There was no further relapse on 3-month follow-up radiographs. Each case showed radiographic evidence of excellent new bone formation at the osteotomy sites. CONCLUSION: The new Le Fort I internal distraction device produced the necessary advancement in all 3 patients. The study also showed that the actual distraction vector differed from the planned vector. This discrepancy was caused by a clockwise rotation of the maxilla during the distraction. Finally, the study showed a variable relapse rate not previously reported in maxillary distraction.     

Salivary gland malignancy with divergent differentiation: is it a teratocarcinosarcoma?

Four poorly differentiated malignant lesions occurred in a 60-year-old Chinese male in the nasal cavity, submandibular gland, a lymph node in the neck, and the mandible. These malignant lesions developed within an 8-year period and each showed distinctive histological features. Among these malignant lesions, the neoplasm in the submandibular gland presented variegated histological and immunohistochemical (IHC) features and posed a diagnostic challenge in interpretation. Based on microscopic and IHC findings, we believe the diagnosis of teratocarcinosarcoma is justified for the submandibular neoplasm and the metastasis in the lymph node. The pathological features and diagnoses of these malignant lesions are discussed.     

Myoblast transfer in duchenne muscular dystrophy

One biceps muscle of 8 patients with Duchenne muscular dystrophy was injected at 55 sites with a total of 55 million viable, purified, and contamination-free normal myoblasts (myoblast transfer). The other biceps of each patient was injected with a placebo to serve as a control. The procedure was blinded to the patients, parents, and investigators. Myoblasts derived from a biopsy specimen of the fathers were cultured and purified under strict conditions and carefully screened for microbial contamination. All patients received cyclophosphamide for immunosuppression for 6 or 12 months. No serious complications were observed after myoblast transfer, indicating that the procedure is safe. The overall therapeutic efficiency of myoblast transfer was poor as judged by the results in maximal voluntary force generation, dystrophin content of the muscle, magnetic resonance imaging of the muscle, and the lack of donor-derived DNA and dystrophin messenger RNA in the injected muscle. An improved efficiency of the take of myoblasts might be achieved by using younger cells and injecting the myoblasts with a myonecrotic agent (to increase the prevalence of regeneration) and a basal laminal fenestrating agent.     

Diethylnitrosamine administration in vivo increases hepatic poly(ADP-ribose) levels in rats: results of a modified technique for poly(ADP-ribose) measurement

Poly(ADP-ribose) (polymer) is enzymatically synthesized on nuclearproteins in response to DNA strand breaks. NAD⁺ is the substratefor this reaction, which is catalyzed by Poly(ADP-ribose)polymerase.This post-translational modification occurs in response to DNAstrand breaks and is thought to play an important role in DNArepair. Polymer synthesis resulting from DNA damage has beendescribed in cultured cells, but measurement is more difficultin animal tissues. In this study, modifications were made toan earlier method to measure carcinogen-induced increases inpolymer levels in vivo. RNase I was added to the enzyme mixtureused to digest polymer to ribosyladenosine (RAdo). This preventedthe inhibition of snake venom phosphodiesterase by RNA. TheHPLC analysis was improved, allowing elimination of the secondboronate affinity chromatography step traditionally used topurify