Rotary ventricular assist devices (VADs) are less sensitive to preload than the healthy heart, resulting in inadequate flow regulation in response to changes in patient cardiac demand. Starling‐like physiological controllers (SLCs) have been developed to automatically regulate VAD flow based on ventricular preload. An SLC consists of a cardiac response curve (CRC) which imposes a nonlinear relationship between VAD flow and ventricular preload, and a venous return line (VRL) which determines the return path of the controller. This study investigates the importance of a physiological VRL in SLC of dual rotary blood pumps for biventricular support. Two experiments were conducted on a physical mock circulation loop (MCL); the first compared an SLC with an angled physiological VRL (SLC‐P) against an SLC with a vertical VRL (SLC‐V). The second experiment quantified the benefit of a dynamic VRL, represented by a series of specific VRLs, which could adapt to different circulatory states including changes in pulmonary (PVR) and systemic (SVR) vascular resistance versus a fixed physiological VRL which was calculated at rest. In both sets of experiments, the transient controller responses were evaluated through reductions in preload caused by the removal of fluid from the MCL. The SLC‐P produced no overshoot or oscillations following step changes in preload, whereas SLC‐V produced 0.4 L/min (12.5%) overshoot for both left and right VADs. Additionally, the SLC‐V had increased settling time and reduced controller stability as evidenced by transient controller oscillations. The transient results comparing the specific and standard VRLs demonstrated that specific VRL rise times were improved by between 1.2 and 4.7 s ( = 3.05 s), while specific VRL settling times were improved by between 2.8 and 16.1 seconds ( = 8.38 s) over the standard VRL. This suggests only a minor improvement in controller response time from a dynamic VRL compared to the fixed VRL. These results indicate that the use of a fixed physiologically representative VRL is adequate over a wide variety of physiological conditions. 相似文献
Objectives: There is a paucity of reporting on surgical outcomes of isolated posterior cruciate ligament reconstruction (PCLR). We hypothesize that isolated PCL injuries failing nonoperative treatment achieve good outcomes and are able to return to sport following PCLR.
Methods: A retrospective analysis was performed to identify patients with isolated PCL injuries that underwent reconstruction between 2001 and 2014. Patients with multi-ligamentous injury or another concomitant knee pathology were excluded. Medical records were reviewed for demographic, clinical and operative data. Patients were contacted for administration of a telephone-based questionnaire which included the International Knee Documentation Committee (IKDC) Subjective Knee Evaluation form, Lysholm-Tegner scales, Marx activity scale (MAS), return to sport status, and patient satisfaction instruments.
Results: A total of 15 isolated PCL reconstructions in 14 patients with a mean age of 27.5 years (range 17–43) met the study inclusion criteria; mean follow up was 6.3 years (range 1.4–15.2). Pre-operatively, the primary complaint was knee instability in all patients; on physical examination, lack of a firm end point during posterior drawer testing was found in 93% (14/15) of the knees. In total, 12 of 15 knees underwent transtibial, single-bundle PCLR and three of 15 underwent tibial inlay, double bundle PCLR. Graft types included: quadriceps autograft (7/15), Achilles allograft (6/15), and hamstring autograft (2/15). There were no graft failures in our patient cohort. At most recent follow up the mean scores respectively on the IKDC form, Lysholm-Tegner scales and MAS were (standard deviation): 77.3 (16.5), 83.1 (17.9), 6.13 (2.6), and 7.1 (6.0). All fourteen patients were athletes prior to their injury and 79% (11/14) returned to sport and overall patient satisfaction was 9.2/10.
Conclusions: Isolated PCLR provides good outcomes at mean medium-term follow up with restoration of function, high rate of return to sport and overall patient satisfaction. 相似文献
The teaching hospital of Nancy, France, implemented a specific multidisciplinary care pathway (French acronym AMDPL) to improve the management of patients presenting with Lyme borreliosis (LB) suspicion. We aimed to assess the first year of activity of this care pathway.
Patients and methods
We included all patients managed in the AMDPL pathway from November 1, 2016 to October 31, 2017. The first step was a dedicated Lyme disease consultation with an infectious disease specialist. Following this consultation, the LB diagnosis was either confirmed and adequate treatment was prescribed, or a differential diagnosis was established and patients received adequate management, or further investigations were required and patients were offered multidisciplinary management as part of a day hospitalization.
Results
A total of 468 patients were included. LB diagnosis was confirmed in 15% of patients (69/468), 49% of patients received a differential diagnosis, and 26% (122/468) of patients had the LB diagnosis ruled out without receiving any other diagnosis.
Conclusions
This is to our knowledge the first multidisciplinary center implemented in France for the management of patients presenting with LB suspicion related to polymorphous signs and symptoms. Several diagnoses could be confirmed or corrected, although some symptoms and complaints could not be explained. This cohort could improve our knowledge of LB and its differential diagnoses. 相似文献
Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 1013 to 105 Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods. 相似文献