Effect of Heat Treatment on Joint Properties of Laser-Welded Ag-Au-Cu-Pd and Co-Cr Alloys

PURPOSE: This study investigated the effect of heat treatment on the strengths of laser-welded cast Ag-Au-Cu-Pd and Co-Cr alloys. MATERIALS AND METHODS: Cast plates of Ag-Au-Cu-Pd (Ag) and Co-Cr (Co) alloys were prepared. After polishing the surfaces to be welded, the plates were matched and butted Ag to Ag (Ag/Ag), Co to Co (Co/Co), and Ag to Co (Ag/Co) and welded using Nd:YAG laser at a pulse duration of 10 ms, spot diameter of 1 mm, and voltage of 200 V. Five specimens were prepared for each experimental condition by bilaterally welding them with five spots. The Ag/Ag, Ag/Co, and control Ag underwent two heat treatments-softening (ST) and hardening (AH). A group of as-cast specimens serving as controls was not given either heat treatment. The failure load and percent elongation were measured at a crosshead speed of 1.0 mm/min. RESULTS: The fracture resistance of Co/Co was similar to that of the control Co, while the fracture resistance of Co/Ag was significantly lower than that of both like alloy pairings for all heat-treating conditions. The control Ag had greater fracture resistance after AH and lower fracture resistance after ST. The AH treatment increased the fracture resistance, and the ST treatment decreased the fracture resistance of both Ag/Ag and Co/Ag, although not significantly. The percentage of elongation appeared to positively correlate with the fracture resistance results. CONCLUSIONS: The results obtained in this study indicated that the age-hardening heat treatment increased the weld strength between the paired Au-Ag-Cu-Pd alloys and between the Au-Ag-Cu-Pd and Co-Cr alloys.     

Effect of microwave treatments on dimensional accuracy of maxillary acrylic resin denture base

Microwave energy has been used as an alternative method for disinfection and sterilization of dental prostheses. This study evaluated the influence of microwave treatment on dimensional accuracy along the posterior palatal border of maxillary acrylic resin denture bases processed by water-bath curing. Thirty maxillary acrylic bases (3-mm-thick) were made on cast models with Clássico acrylic resin using routine technique. After polymerization and cooling, the sets were deflasked and the bases were stored in water for 30 days. Thereafter, the specimens were assigned to 3 groups (n=10), as follows: group I (control) was not submitted to any disinfection cycle; group II was submitted to microwave disinfection for 3 min at 500 W; and in group III microwaving was done for 10 min at 604 W. The acrylic bases were fixed on their respective casts with instant adhesive (Super Bonder) and the base/cast sets were sectioned transversally in the posterior palatal zone. The existence of gaps between the casts and acrylic bases was assessed using a profile projector at 5 points. No statistically significant differences were observed between the control group and group II. However, group III differed statistically from the others (p<0.05). Treatment in microwave oven at 604 W for 10 min produced the greatest discrepancies in the adaptation of maxillary acrylic resin denture bases to the stone casts.     

Surgical and clinical management of a patient with Glanzmann thrombasthenia: a case report.

A 6-year-old girl with Glanzmann thrombasthenia presented with caries and periapical lesions in the primary mandibular second molars and moderate gingivitis of the maxillary and mandibular anterior teeth. Dental extraction was recommended, and before every surgical intervention, the patient underwent platelet-concentrate transfusion to prevent hemorrhage. Epsilon aminocaproic acid was administered 6 hours before, and 48 hours after every dental procedure to prevent bleeding. In this case, treatment was effective in the prevention of hemorrhagic complications, during the required dental procedures.     

Effect of primer precuring on the shear bond strength of orthodontic brackets

Two adhesive systems, Transbond APC II (3M Unitek, Monrovia, Calif) and Quick Cure (Reliance Orthodontic Products, Itasca, Ill), were used to determine the efficacy of precuring the liquid resin primer phase of the systems to increase shear bond strength. One hundred sixty bovine incisors were divided into groups of 20 specimens. In 1 group, the primer was cured before placement of the bracket with the filled adhesive material, and, in the other group, the primer was not precured. The shear-peel bond strength was tested with a testing machine at 30 minutes and 24 hours. No statistically significant difference in bond strength was found between the groups that had or had not been precured. More adhesive remained on the teeth with the Transbond when the primer was not precured. There is no advantage or disadvantage in bracket bond strength by precuring the primer before placing the bracket and filled component of the adhesive.     

PATTERN OF DISOCCLUSION IN PATIENTS WITH COMPLETE CLEFT LIP AND PALATE

Objective:

to analyze the pattern of disocclusion during excursive mandibular movements and presence or absence of occlusal interferences and occlusal pathologies (gingival recession and abfraction).

Method:

examination of 120 individuals divided into two groups, as follows: Group 1-90 patients with complete cleft lip and palate (study group), subdivided into 30 patients with complete left unilateral cleft lip and palate, 30 patients with complete right unilateral cleft lip and palate and 30 patients with complete bilateral cleft lip and palate; Group 2-30 individuals without clefts (control group).

Results:

58.8% of patients in Group 1 presented unilateral or bilateral canine guidance, 26.6% presented unilateral or bilateral group function and 54.4% presented lateral movements through the posterior teeth. Regarding protrusive movements, 80% presented anterior guidance and 20% presented posterior guidance. In Group 2, 69.6% of individuals presented unilateral or bilateral canine guidance, 43.2% presented unilateral or bilateral group function and only 13.3% presented lateral movements through the posterior teeth; 3.4% presented protrusion through the posterior teeth.

Conclusions:

there was no difference in the pattern of disocclusion between subgroups of patients with clefts. Group 2 presented predominance of bilateral group function, whereas Group 1 presented a higher prevalence of posterior guidance during lateral movements. Protrusion occurred primarily through anterior guidance in Group 2 and through the posterior teeth in Group 1. There was high prevalence of occlusal interferences at the molar area for both groups, yet with no correlation with occlusal pathologies (recession and abfraction).     

Open mandibular condylotomy (osteotomy) with precision scaphoid staple osteosynthesis and meniscopexy. A description of the operation

The technical minutiae of the operation of open mandibular condylotomy and precision scaphoid staple osteosynthesis with meniscoplasty or meniscopexy is described and illustrated. The operation is regarded as an evolution of closed condylotomy described by Ward in 1961 and is indicated for those cases of severe and persistent temporomandibular joint pain and crepitus unresponsive to skilled conservative treatment over a reasonable time. The success of the procedure is probably the sequel of a partial denervation of the joint capsule associated with arthrotomy, the interruption of venous hypertension, the relocation of the mandibular condyle and enlargement of the joint space. The operation is also applicable to cases of active (and inactive) mandibular condylar hyperplasia wherein a condylar neck ostectomy and staple is used to ablate an active growth centre or correct a lesser degree of mandibular asymmetry.     

Evaluation of rat alveolar bone response to Angelus MTA or experimental light-cured mineral trioxide aggregate using fluorochromes

Introduction

The aim of this study was to evaluate the rat alveolar bone response after the implantation of experimental light-cured mineral trioxide aggregate (MTA) or Angelus MTA (Angelus, Londrina, Paraná, Brazil) by histological and fluorescence analysis.

Methods

Thirty Wistar Albino rats were divided into three groups. In the control group, empty polyethylene tubes were inserted into the rat alveolar sockets immediately after extraction. In the other groups, the tubes were filled with light-cured MTA or Angelus MTA. Five animals from each group were injected with calcein on day 7, alizarin on day 14, and oxytetracycline on day 21. On day 30, these animals were killed, and the right hemimaxillas were removed and histologically processed. Half of the maxillas were processed and stained with hematoxylin and eosin. The remaining maxillas were processed for fluorescence analysis and stained with Stevenel blue and alizarin red. New bone was histomorphometrically evaluated using a Merz grid.

Results

The light-cured MTA presented a similar response when compared with Angelus MTA; it was characterized by a mild inflammatory response and complete bone healing. In the light-cured MTA group, the fluorescence areas were more evident at 21 days, showing an increase in bone formation. However, dystrophic mineralization was observed only with Angelus MTA.

Conclusions

It was concluded that both materials present a similar inflammatory response and bone healing, but dystrophic mineralization was observed only with Angelus MTA.     

Characterization of dental nociceptive neurons

Selective blockade of nociceptive neurons can be achieved by the delivery of permanently charged sodium channel blockers through the pores of nociceptive ion channels. To assess the feasibility of this application in the dental area, we investigated the electrophysiological and neurochemical characteristics of nociceptive dental primary afferent (DPA) neurons. DPA neurons were identified within trigeminal ganglia labeling with a retrograde fluorescent dye applied to the upper molars of adult rats. Electrophysiological studies revealed that the majority of dental primary afferent neurons showed characteristics of nociceptive neurons, such as sensitivity to capsaicin and the presence of a hump in action potential. Immunohistochemical analysis revealed a large proportion of DPA neurons to be IB(4)-positive and to express TRPV1 and P2X(3). Single-cell RT-PCR revealed mRNA expression of various nociceptive channels, including the temperature-sensitive TRPV1, TRPA1, TRPM8 channels, the extracellular ATP receptor channels P2X(2) and P2X(3), as well as the nociceptor-specific sodium channel, Na(V)1.8. In conclusion, DPA neurons have the electrophysiological characteristics of nociceptors and express several nociceptor-specific ion channels. Analysis of these data may assist in the search for a new route of entry for the delivery of membrane-impermeant local anesthetics.