Relationship between occlusal curvatures and bite force in humans

PurposeIt is clinically believed that humans with a broad and rounded dental arch accompanied by a shallow curve of Spee have good masticatory function. However, the relationship between them has not been elucidated fully. The purpose of this study was to quantitatively examine the relationship between occlusal curvatures and bite force.Materials and methodsBite force was measured and analyzed in 20 young adults with healthy permanent dentition and normal stomatognathic function using a bite force recording system. Study models of the mandibular dental arch were scanned with CCD cameras, and X, Y and Z coordinates of the cusp tips of the molars were recorded. Their occlusal curvatures were analyzed using a three-dimensional measurement system.ResultsBite force showed significant positive correlations (0.52 < R < 0.57) with the radius of the anteroposterior occlusal arc of the molar region and the radii of the translateral occlusal arcs in the second premolar, first molar and second molar regions, and showed significant positive correlation (R = 0.71) with the radius of the occlusal sphere of the molar region.ConclusionsIt was suggested that occlusal curvatures is related with the magnitude of bite force, and that the three dimensional spherical analysis of occlusal curvatures is useful predictor of the masticatory function.     

Class II high angle case for which titanium screws were added after mandibular posterior rotation

In skeletal Class II patients with a high mandibular plane angle, it is well known that posterior rotation of the mandible often occurs during treatment using a preadjusted edgewise appliance. In this case, posterior rotation of the mandible with increased overjet occurred after the buccal inclination of the mandibular 2nd molars. This case report describes a Class II high angle case for which titanium screws were added as an absolute anchorage to improve the posterior rotation of the mandible. To correct the posterior rotation of the mandible, mandibular molars were intruded and the mandibular arch was mesially moved using titanium screws. The treatment results show that titanium screws were useful for improving the posterior rotation of the mandible during treatment using a preadjusted edgewise appliance.     

Immunohistochemical expression of podoplanin in so-called hard α-keratin-expressing tumors, including calcifying cystic odontogenic tumor, craniopharyngioma, and pilomatrixoma

Podoplanin, a transmembrane sialomucin-like glycoprotein, is a specific marker of lymphatic vessels, and its expression is also considered to be associated with tumor invasion and tooth development. In this study, we examined the expression of podoplanin in calcifying cystic odontogenic tumor (CCOT) in comparison with that in other so-called hard α-keratin-expressing tumors such as craniopharyngioma (CP) and pilomatrixoma (PM). Immunohistochemical staining for podoplanin was carried out using surgical specimens of 15 CCOTs of the jaw, 19 CPs of the pituitary gland, and 15 PMs of the skin. Positivity for hard α-keratin was evident in ghost, shadow and transitional cells in all of these tumors (100%). The podoplanin expression in CCOTs was evident in the periphery of ameloblastoma-like epithelium (86.6%) and the epithelial cells adjacent to ghost cells (60%). On the other hand, in adamantinomatous-type CPs, podoplanin expression was observed in epithelial components corresponding to the stratum intermedium (100%), but not in the periphery of ameloblastoma-like epithelium (0%). In squamous-type CPs podoplanin was expressed in basal cells (100%), but all of the PMs were podoplanin-negative (0%). In the periphery of the ameloblastoma-like epithelium or basophilic cell layer, podoplanin was expressed more strongly in CCOTs than in CPs or PMs. These findings suggest that the expression of podoplanin in CCOTs may reflect rapid turnover of cytoskeletal filaments and local invasiveness.     

Real-time tissue elastography for evaluation of hepatic fibrosis and portal hypertension in nonalcoholic fatty liver diseases

The aim of this study was to prospectively measure liver stiffness with real-time tissue elastography in patients with nonalcoholic fatty liver diseases (NAFLD) and to compare the result with the clinical assessment of fibrosis using histological stage. One hundred and eighty-one prospectively enrolled patients underwent real-time tissue elastography, with the first 106 being analyzed as the training set and the remaining 75 being evaluated as the validation set. Hepatic and splenic elastic ratios were calculated and compared with stage of histological fibrosis. Portal hypertension (PH) was assessed. Real-time tissue elastography cut-off values by stage in the training set were 2.47 for F1, 2.67 for F2, 3.02 for F3, and 3.36 for F4. Using these cut-off values, the diagnostic accuracy of hepatic fibrosis in the validation set was 82.6%-96.0% in all stages. Only portal fibrosis correlated with the hepatic elastic ratio by multivariate analysis. The area under the receiver operating characteristic curve of elastic ratio better correlated than serum fibrosis markers in both early and advanced fibrosis stages. Patients with PH, defined by splenic elasticity, had early fibrosis. Patients with severe PH were found only in the group with cirrhosis. Conclusion: Real-time tissue elastography is useful in evaluating hepatic fibrosis and PH in patients with NAFLD. (HEPATOLOGY 2012).     

A Trigeminal Neuralgia-like Paroxysmal Pain Condition Presumably Due to Buccal Nerve Compression in the Temporalis Muscle

We encountered three patients with trigeminal neuralgia-like paroxysmal pain in the buccal nerve region. In all cases, paroxysmal pain was felt spreading to the receptive field of the ipsilateral buccal nerve, and clear tenderness was observed during intraoral palpation at the inner side of the mandibular ramus where the temporalis muscle runs and attaches. It was assumed that the paroxysmal pain might be caused by nerve compression related to temporalis muscle hyperactivity. To lend support to this hypothesis, we also studied the anatomical relationship between the buccal nerve and the masticatory muscles. In this autopsy study, the buccal nerve pierced the temporalis muscle in six (12%) of 52 specimens from 26 cadavers. These findings support the hypothesis that peripheral buccal nerve compression could be an etiology of paroxysmal neuropathic pain in the unilateral orofacial region.     

Wear and mechanical properties of composite resins consisting of different filler particles

To investigate the effects of different fillers and their contents on the wear of composite resins, four composites (CS: non-porous spherical silica, AS: porous spherical silica, AZ: porous spherical zirconium silicate, and IS: non-porous irregular-shaped silica) were experimentally prepared using different fillers (CS, AZ, AS and IS). Simulated occlusal wear and toothbrush wear were evaluated for these composites and their worn surfaces were observed. The mechanical properties (flexural strength, elastic modulus and hardness) of these composites were determined to examine the relationships between wear and these mechanical properties. CS showed the highest occlusal wear, but the lowest toothbrush wear among four composites. AS and AZ had lower occlusal wear than CS and IS, while their toothbrush wear was higher than CS and close to that of IS. All composites showed increase in the occlusal wear as filler content increased. CS and IS showed decrease in the toothbrush wear as the filler content increased, whereas AS and AZ did not. The occlusal wear surfaces of CS and IS had concavities, while those of AZ and AS were relatively smooth with flattened filler. The toothbrush wear surfaces of CS and IS revealed the extrusion of filler from resin matrix, whereas those of AZ and AS were smooth with flattened filler. The toothbrush wear of CS and IS decreased as the mechanical properties increased, whereas those of AS and AZ did not. The occlusal wear of all composites increased as the mechanical properties increased, which would not reflect effects of these mechanical properties.     

Less invasive transjugular approach with Fallopian bridge technique for facial nerve protection and hearing preservation in surgery of glomus jugulare tumors

For the past three decades, surgery of glomus jugulare tumors (GJTs) has been characterized by extensive combined head and neck, neuro-otologic, and neurosurgical approaches. In recent years, the authors have modified the operative technique to a less invasive approach for preservation of cranial nerves while achieving satisfactory tumor resection. We evaluated and compared the clinical outcomes of our current less invasive approach with our previous more extensive procedures. The clinical records of 39 cases of GJT surgically treated between 1992 and 2011 were retrospectively reviewed. The less invasive transjugular approach with Fallopian bridge technique (LI-TJ) was used for the most recent five cases. The combined transmastoid–transjugular and high cervical (TM-HC) approach was performed in 30 cases, while four cases were treated with a transmastoid–transsigmoid approach with facial nerve translocation. Operative technique, extent of tumor resection, operating time, hospital stay, and morbidity were examined through the operative records, and a comparison was made between the LI-TJ cases and the more invasive cases. No facial nerve palsy was seen in the LI-TJ group while the TM-HC group demonstrated six cases (17.6 %) of facial palsy (House–Brackmann facial nerve function grading scale grade II and III). The complication rate was 0 % in the LI-TJ group and 16.7 % in the more invasive group. The mean operative time and hospital stay were shorter in the LI-TJ group (6.4 h and 4.3 days, respectively) compared with the more invasive group (10.7 h and 8.0 days, respectively). The LI-TJ approach with Fallopian bridge technique provided adequate tumor resection with cranial preservation and definitive advantage over the more extensive approach.