A pilot study comparing the effectiveness of conventional training and virtual reality simulation in the skills acquisition of junior dental students

The use of virtual reality (VR) in the training of operative dentistry is a recent innovation and little research has been published on its efficacy compared to conventional training methods. To evaluate possible benefits, junior undergraduate dental students were randomly assigned to one of three groups: group 1 as taught by conventional means only; group 2 as trained by conventional means combined with VR repetition and reinforcement (with access to a human instructor for operative advice); and group 3 as trained by conventional means combined with VR repetition and reinforcement, but without instructor evaluation/advice, which was only supplied via the VR-associated software. At the end of the research period, all groups executed two class 1 preparations that were evaluated blindly by 'expert' trainers, under traditional criteria (outline, retention, smoothness, depth, wall angulation and cavity margin index). Analyses of resulting scores indicated a lack of significant differences between the three groups except for scores for the category of 'outline form', for group 2, which produced significantly lower (i.e. better) scores than the conventionally trained group. A statistical comparison between scores from two 'expert' examiners indicated lack of agreement, despite identical written and visual criteria being used for evaluation by both. Both examiners, however, generally showed similar trends in evaluation. An anonymous questionnaire suggested that students recognized the benefits of VR training (e.g. ready access to assessment, error identification and how they can be corrected), but the majority felt that it would not replace conventional training methods (95%), although participants recognized the potential for development of VR systems in dentistry. The most common reasons cited for the preference of conventional training were excessive critical feedback (55%), lack of personal contact (50%) and technical hardware difficulties (20%) associated with VR-based training.     

Spring-mediated mandibular distraction osteogenesis

Successful performance of distraction osteogenesis requires rigorous patient compliance with a daily activation regimen of a percutaneous screw. Previous clinical studies have found that failure of patient compliance with this regimen is the most common complication leading to technical failure of the distraction process. The authors have developed an internalized spring-mediated device for mandibular distraction osteogenesis that can potentially abrogate the risks associated with patient compliance by allowing for automated distraction across an osteotomy. Twenty adult New Zealand White rabbits underwent unilateral mandibular osteotomy. A segment of nickel-titanium shape memory alloy reinforced at both ends with a pinball was fashioned into an inferiorly based arc and secured to the mandible with stainless steel wire. On postoperative day 12, spring activation commenced by cutting a wire binding the two pinballs to one another. Animals were observed for 6 weeks before they were killed. Radiographic studies and decalcified histologic analysis were performed on extracted mandibles. Temperature- and displacement-dependent properties of the shape memory alloy were also examined. Five animals were excluded from the study due to infection, nonunion, or device failure. A mean distraction of 1.2 mm in the distracted hemimandible relative to the nonoperated hemimandible was found (P <.001, two-tailed paired t test). The maximum distraction achieved in an experimental specimen using the spring distractor was 3.7 mm. There were no other histologic or radiographic differences found between study specimens and specimens subjected to traditional distraction methods. Biomechanical testing of the shape memory alloy revealed a temperature-dependent increase in force at body temperature compared with room temperature and a reduction in force with increased displacement of the spring. This study demonstrates the feasibility of spring-mediated distraction osteogenesis across an osteotomy. As the field of distraction osteogenesis matures, the next level of sophistication in the clinical development of devices will incorporate technology that permits fully internalized and automated distraction to occur.     

Survey of state funds available for rehabilitation of patients with cleft lip/palate

An effort was made to determine the amount of funds budgeted in each of the 50 U.S. states for total rehabilitation of patients with cleft lip and/or cleft palate. Questionnaires were sent following a pilot letter to the directors of each state Department of Health. Total funds per patient ranged from $17,442 for Delaware to a low of $426 for Wisconsin. Dental funds per patient ranged from $4,214 dollars for Wyoming to a low of $192 for New York.     

Occlusion for fixed prosthodontics: a historical perspective of the gnathological influence

This article addresses the historical perspective of the gnathological influence upon the concepts of occlusion for fixed prosthodontics. A critical assessment and subsequent scientific validation of occlusal theories require an understanding of their evolution in the formative years and the subsequent development of effective models for clinical practice. While gnathological concepts offer a structured methodology for prosthodontic procedures, further research is needed to corroborate current occlusal treatment approaches. This review focuses on the "classic" fixed prosthodontic literature and the currently available scientific literature involving fixed prosthodontic dentate occlusion and gnathology. A MEDLINE search was performed to identify English-language peer-reviewed publications spanning the last 56 years, along with an extensive hand search for years prior. Electronic searches of the literature were performed in MEDLINE using the key words: case series, clinical trials, cohort studies, fixed partial denture occlusion, dental occlusion, dental occlusion research, centric relation, incisal guidance, maximal intercuspation, occlusal vertical dimension, and occlusion, in various combinations to obtain potential references for review. A total of 10,382 English-language nonduplicate titles were obtained for 1950-2006 for the key words "dental occlusion." Other key word searches produced smaller numbers of articles, many of which were duplicates due to multiple searches and were subsequently eliminated. Manual hand searching of the MEDLINE reference list and other journals of interest was performed to identify any articles missed in the original search. Articles were included for review if they contained emerging occlusal theories, new technologies, or occlusal studies that included multiple subjects in contrast to case reports.     

Which patients are most at risk of methicillin resistant Staphylococcus aureus: a review of admissions to a regional maxillofacial ward between 2001 and 2005

This study aimed to identify all Staphylococcus aureus (MRSA) cases on a Regional Maxillofacial ward, to estimate incidence and to ascertain who were most at risk. The study also explored clinical and demographic factors associated with MRSA in a subset of consecutive patients managed by primary surgery for previously untreated oral and oropharyngeal squamous cell carcinoma (OOSCC) over the same time period. Patients admitted from 1st April 2001 to 31st March 2006 to the Regional Maxillofacial Unit ward, Liverpool were identified by a retrospective review of the hospital MRSA database and there were 10109 patient admissions. MRSA (1.1%) occurred in 115 patient episodes involving 97 patients. There were 84 patients having a single episode and 13 more than one. There were no cases of mortality due to MRSA. Of the MFU patients 73 were oncology and 7 trauma. In the oncology group the commonest primary sites were wound (41) and sputum (11). Of new patients admitted for definitive treatment for OOSCC, 14% had MRSA and the two main risk factors were stage of cancer (P<0.001) and free flap (P<0.001). The risk of MRSA infection on our maxillofacial ward is low though MRSA infection is more prevalent among oncology patients particularly those requiring free tissue transfer. Careful adherence to infection prevention and control precautions is essential and practical methods to reduce MRSA need further evaluation.     

The effect of casting conditions on the biaxial flexural strength of glass–ceramic materials

OBJECTIVE: To assess the effect of mould and glass casting temperatures on the biaxial flexural strength (BFS) of two different types of castable glass-ceramic, using existing laboratory equipment and techniques. METHODS: Two castable glass-ceramic materials were evaluated. One glass (LG3) is based on SiO2-Al2O3-P2O5-CaO-CaF2, and is similar in composition to glasses used in the manufacture of glass-ionomer cements. The other glass (SG3) is based on SiO2-K2O-Na2O-CaO-CaF2, and is a canasite-based material. Both materials were used to produce discs of 12 mm diameter and 2 mm thickness using the same lost-wax casting process as used for metal castings. Mould temperatures of between 500 degrees C and 1000 degrees C and glass casting temperatures of between 1100 degrees C and 1450 degrees C were evaluated. The cast discs were cerammed and the biaxial flexural strength determined with a Lloyd 2000 R tester. RESULTS: A significant difference was found for the BFS in the range of mould temperatures evaluated, with the optimum investment mould temperature being 590 degrees C for LG3 and 610 degrees C for SG3 (p = 0.0002 and p = 0.019, respectively). No significant differences were seen between any of the glass casting temperatures evaluated. SIGNIFICANCE: The mould temperature for castable glass-ceramic materials produced using the lost-wax casting process can have a significant effect on BFS. The optimum mould temperature may differ slightly depending on the type of material being used. The glass casting temperature of these materials does not appear to have a significant effect on BFS.     

Measurement of periapical pressure created by occlusal loading

The aim of this study was to develop an in vitro model in which the pressure in the periapical tissues can be measured during loading. Extracted human maxillary central incisors were embedded into resin blocks that had physical characteristics similar to bone and periodontal ligament. Each tooth was loaded with 20, 40, 50, 60, 75, 85, 100, 200, 300 and 450 N vertical forces from the incisal edge of the crown; this procedure was carried out three consecutive times. A minute resistor embedded in the periapical space was used to detect apical pressure changes during occlusal loading. The ratio of apical pressure changes (delta P) to the loading force changes (delta F) was calculated. The periapical pressure detected was in direct proportion to the loading force. The mean value of delta P/delta F was 5.994 kPa/N (SD = 2.04). Direct proportionality was found between the coronal loading and the apical hydrostatic pressure. The (delta P)/(delta F) ratio determined in this study makes it easier to estimate the apical hydrostatic pressure values during occlusal loading of single rooted teeth. In this study the apical pressure generated under occlusal loading was of the same magnitude as that estimated with the finite element method.     

Gene expression analysis in cells of the dentine-pulp complex in healthy and carious teeth

Knowledge of the molecular events that occur in carious disease has so far been constrained due to difficulties in obtaining sufficient quantities of the dental tissues and cells involved. Our histological findings indicate that a pulp-odontoblast cellular complex can be obtained from carious and healthy human teeth when exposed to low-temperatures prior to pulpal extirpation and from rodent teeth processed at room-temperature. In contrast, pulpal tissue extracted from room-temperature processed human teeth and low-temperature processed rodent teeth resulted in the odontoblast layer remaining attached to the pulp chamber. Semi-quantitative RT-PCR (sq-RT-PCR) analysis confirmed that markers previously shown to be preferentially expressed in odontoblasts, namely dentin sialophosphoprotein (DSPP) and Nestin, amplified more readily from the extracted pulp-odontoblast complex, as compared to pulpal tissue alone, in both human and rodent samples. Subsequent gene expression analysis of collagen-1alpha and collagen-3alpha indicated levels were significantly higher in carious pulpal tissue. In addition, analysis characterising the expression of members of the transforming growth factor and bone morphogenic protein families and their receptors indicated in general, that these genes were expressed by healthy odontoblasts and up-regulated in both pulpal cells and odontoblasts in response to carious injury. Use of this temperature-sensitive dental tissue preparation procedure allows detection of differential gene expression in odontoblasts and other pulpal cells in healthy and carious tissue.     

Students'' perceptions of seminar and lecture-based teaching in restorative dentistry

In an era of self-directed learning, it is important to seek the views of dental students regarding their learning experience. Using an anonymous questionnaire, clinical dental students' perceptions of seminar and lecture-based teaching in restorative dentistry were sought. 116 of 136 questionnaires circulated were returned for analysis giving a response rate of 85%. Clinical seminars as opposed to lectures were, in the opinion of the students, a more effective way of learning, more relevant to self-development and more interactive. Seminar-based learning was considered to be more amenable to self-direction than formal didactic lectures. It is concluded that the students included in this study were found to prefer seminar-based learning opportunities as opposed to more traditional styles of learning, specifically, didactic lectures.