Methods for derivation of human embryonic stem cells

The expanded blastocysts, developed from 2PN-stage embryos, are generally divided into three categories: a good blastocyst containing a large and distinguishable inner cell mass (ICM), a blastocyst with a small and distinct ICM, and a blastocyst with a poorly defined ICM. In this study, we introduce methods for the derivation of human embryonic stem cells (hESCs) depending on the quality of the blastocysts. An immunosurgical method was used for the good expanded blastocysts. This method, however, raises the probability of ICM loss in cases of hESC derivation from blastocysts with smaller or indistinct ICMs. Furthermore, this method is also associated with a risk of the contamination of the hESCs with animal pathogens. To overcome these shortcomings, the partial- or whole-embryo culture method was used. For blastocysts with no visible ICM, the whole-embryo culture method was used to establish hESCs via the seeding of the entire blastocyst without its zona pellucida directly on a STO feeder layer. However, trophectodermal overgrowth tends to hinder the expansion of the ICM during the initial steps of hESC derivation. Therefore, the partial-embryo culture method was developed to establish hESCs from blastocysts with smaller ICMs. The surgical isolation of the region containing the ICM with an ultra-fine glass pipette alleviates trophectoderm overgrowth. This method is also applicable to blastocysts with large and distinct ICMs, and the efficiency of this method is comparable to that of the immunosurgical method.     

Effects of an Interferon Inducer, Poly I:C, on Acute Ocular Infection Produced by Intracameral Inoculation of Toxoplasma gondii

A potent interferon inducer, synthetic polyinosinic acid-polycytidylic acid complex (poly I:C), was used prophylactically and therapeutically in experimental ocular Toxoplasma infections in rabbits. Daily intravenous injections of poly I:C alone or when combined with daily subconjunctival injections of the inducer delayed the appearance of conjunctivitis, corneal opacity, and iritis in Toxoplasma-infected eyes provided that the treatment was started 1 day before the infection. When the treatment was begun at the same time or 1 day after the infection, no delay in the production of the ocular lesions was noted. In no case was the treatment curative or completely suppressive.     

Electrochemical properties of suprastructures galvanically coupled to a titanium implant

In recent years, dental implants have been widely used for the aesthetic and functional restoration of edentulous patients. Dental implants and restorative alloys are required with high corrosion resistance. Suprastructures and implants of different compositions in electrical contact may develop galvanic or coupled corrosion problems. In addition to galvanic corrosion, crevice and pitting corrosion may occur in the marginal gap between dental implant assemblies. In this study, gold, silver-palladium, cobalt-chromium, and nickel-chromium suprastructures were used to investigate their galvanic and crevice corrosion characteristics in combination with titanium (Ti) implants. Potentiodynamic and potentiostatic testing were performed in artificial saliva at 37 degrees C. Potentiodynamic testing was carried out at the potential scan rate of 1 mV/s in the range of -600-1600 mV (SCE). Potentiostatic testing was performed with an open-circuit potential and current densities at -250, 0, and 250 mV (SCE) in artificial saliva. After electrochemical testing, surface morphologies and cross-sections were examined using micrographs of the samples. Potentiodynamic test results indicated that suprastructure/Ti implant couples produced passive current densities in the range of 0.5-12 microA/cm(2); Ti abutment/Ti implant and gold/Ti implant couples exhibited relatively low passive current densities; Co-Cr/Ti implant couples the highest. Co-Cr and Ni-Cr/Ti implant couples showed breakdown potentials of 700 and 570 mV (SCE), respectively. The open-circuit potentials of silver, Ti abutment, gold, Ni-Cr, and Co-Cr/Ti implant couples were -93.2 +/- 93.9, -123.7 +/- 58.8, -140.0 +/- 80.6, -223.5 +/- 35.1, and -312.7 +/- 29.8 mV (SCE), respectively, and did not change with immersion time. The couples exhibited cathodic current densities at -250 mV (SCE); in particular, gold and silver alloys showed high cathodic current densities of -3.18 and -6.63 microA/cm(2), respectively. At 250 mV (SCE), Ti abutment/Ti implant couples exhibited a minimum current density of 9.48 x 10(-2) microA/cm(2), but gold, Ni-Cr, Co-Cr, and silver/Ti implant couples exhibited 0.313, 1.27, 5.60, and 8.06 microA/cm(2), respectively. All couples exhibited relatively low current densities at 0 mV (SCE). Photomicrographs after electrochemical testing showed crevice or pitting corrosion in the marginal gap and at the suprastructure surface. Although of the tested samples Co-Cr/Ti implant couples showed the possibility of galvanic corrosion, its degree was not significant. However, it should be borne in mind that galvanic corrosion can accelerate localized corrosion, such as crevice or pitting corrosion.     

Spontaneous disruption of mycotic aneurysm involving innominate artery

We report a case of ruptured mycotic aneurysm involving innominate artery requiring an urgent surgical treatment. A 62-yr-old woman presented with fever and dyspnea. Previously, she was diagnosed with colon cancer and received right hemicolectomy and one cycle of adjuvant chemotherapy. On echocardiogram, pericardial effusion was noted and emergency pericardiocentesis was performed. CT scan revealed aortic aneurysm involving ascending aorta and innominate artery, and thrombi surrounding those structures. Patch repair of the defect in the ascending aorta and ringed Goretex graft to bypass the innominate and ascending aorta were performed. We believe that this is the first case of ruptured mycotic aneurysm involving innominate artery.     

Autologous stem cell transplantation in the treatment of refractory rheumatoid arthritis

The concept of using high-dose immunosuppressive treatment (HDIT) with autologous stem cell transplantation (ASCT) to treat patients with refractory rheumatoid arthritis has been provided by animal studies and anecdotal case reports. Over the past five years, an increasing number of patients with refractory rheumatoid arthritis have received HDIT with ASCT as an adjunct to intense immunosuppression. Here, we present a case of refractory rheumatoid arthritis in a 54-yr-old woman using HDIT with ASCT. Peripheral blood stem cells were mobilized with cyclophosphamide (4 g/m(2)) followed by G-CSF (5 microg/kg/day). Leukapheresis continued daily until the number of harvested progenitor cells reached 2 x 10(6) CD34+ cells/kg after CliniMax CD34+ positive selection. For HDIT, high-dose cyclophosphamide (total dose 200 mg/kg) and antithymocyte globulin (total dose 90 mg/kg) were administered and CD34+ cells were infused 24 hr after HDIT. The patient tolerated the treatment well but experienced an episode of neutropenic fever. She achieved an early dramatic improvement of joint symptoms during therapy. Fifty percent of improvement of rheumatoid arthritis by the American College of Rheumatology (ACR 50) preliminary definition was fulfilled during the 6 months following ASCT. Although further long-term follow-up is required, the patient's activity of arthritis has been stable since receiving HDIT with ASCT.     

Detection of reactive oxygen species (ROS) and apoptosis in human fragmented embryos

In human in-vitro fertilization (IVF)-embryo transfer, the in-vitro culture environment differs from in-vivo conditions in that the oxygen concentration is higher, and in such conditions the mouse embryos show a higher concentration of reactive oxygen species (ROS) in simple culture media. ROS are believed to cause damage to cell membranes and DNA fragmentation in somatic cells. This study was conducted to ascertain the level of H2O2 concentration within embryos and the morphological features of cell damage induced by H2O2. A total of 62 human oocytes and embryos (31 fragmented, 15 non-fragmented embryos, 16 unfertilized oocytes) was obtained from the IVF-embryo transfer programme. The relative intensity of H2O2 concentrations within embryos was measured using 2',7'-dichlorodihydrofluorescein diacetate by Quanti cell 500 fluorescence imaging and DNA fragmentation was observed with transmission electron microscopy and an in-situ apoptosis detection kit. The H2O2 concentrations were significantly higher in fragmented embryos (72.21 +/- 9.62, mean +/- SEM) compared to non-fragmented embryos (31.30 +/- 3.50, P < 0.05) and unfertilized oocytes (30.75 +/- 2.67, P < 0.05). Apoptosis was observed only in fragmented embryos, and was absent in non-fragmented embryos. Electron microscopic findings confirmed apoptotic bodies and cytoplasmic condensation in the fragmented blastomeres. We conclude that there is a direct relationship between increased H2O2 concentration and apoptosis, and that further studies should be undertaken to confirm these findings.      

High throughput parallel analysis of hundreds of patient samples for more than 100 mutations in multiple disease genes

As more mutations are identified in genes of known sequence, there is a crucial need in the areas of medical genetics and genome analysis for rapid, accurate and cost-effective methods of mutation detection. We have developed a multiplex allele-specific diagnostic assay (MASDA) for analysis of large numbers of samples (> 500) simultaneously for a large number of known mutations (> 100) in a single assay. MASDA utilizes oligonucleotide hybridization to interrogate DNA sequences. Multiplex DNA samples are immobilized on a solid support and a single hybridization is performed with a pool of allele-specific oligonucleotide (ASO) probes. Any probes complementary to specific mutations present in a given sample are in effect affinity purified from the pool by the target DNA. Sequence-specific band patterns (fingerprints), generated by chemical or enzymatic sequencing of the bound ASO(s), easily identify the specific mutation(s). Using this design, in a single diagnostic assay, we tested samples for 66 cystic fibrosis (CF) mutations, 14 beta-thalassemia mutations, two sickle cell anemia (SCA) mutations, three Tay-Sachs mutations, eight Gaucher mutations, four mutations in Canavan disease, four mutations in Fanconi anemia, and five mutations in BRCA1. Each mutation was correctly identified. Finally, in a blinded study of 106 of these mutations in > 500 patients, all mutations were properly identified. There were no false positives or false negatives. The MASDA assay is capable of detecting point mutations as well as small insertion or deletion mutations. This technology is amenable to automation and is suitable for immediate utilization for high-throughput genetic diagnostics in clinical and research laboratories.