Resveratrol-loaded PLGA nanoparticles mediated programmed cell death in prostate cancer cells

Resveratrol (RL), a natural polyphenol, is known for its diverse biological effects against various human cancer cell lines. But low aqueous solubility, poor bioavailability, and stability limit its efficacy against prostate cancer. In this study polymeric nanoparticles encapsulating resveratrol (RLPLGA) were designed and their cytotoxic and mode of apoptotic cells death against prostate cancer cell line (LNCaP) was determined. Nanoparticles were prepared by solvent displacement method and characterized for particle size, TEM, entrapment efficiency, DSC and drug release study. RLPLGA exhibited a significant decrease in cell viability with 50% and 90% inhibitory concentration (IC₅₀ and IC₉₀) of 15.6?±?1.49 and 41.1?±?2.19?μM respectively against the LNCaP cells. This effect was mediated by apoptosis as confirmed by cell cycle arrest at G1-S transition phase, externalization of phosphatidylserine, DNA nicking, loss of mitochondrial membrane potential and reactive oxygen species generation in LNCaP cells. Furthermore, significantly greater cytotoxicity to LNCaP cells was observed with nanoparticles as compared to that of free RL at all tested concentrations. RLPLGA nanoparticles presented no adverse cytotoxic effects on murine macrophages even at 200?μM. Our findings support the potential use of developed resveratrol loaded nanoparticle for the prostate cancer chemoprevention/ chemotherapy with no adverse effect on normal cells.     

Development and validation of UPLC-PDA method for concurrent analysis of bergenin and menisdaurin in aerial parts of Flueggea virosa (Roxb. ex Willd.)

Bergenin and menisdaurin are biologically active components which are found in plant Flueggea virosa (Phyllanthaceae). Bergenin has pharmacological actions such as chemopreventive and antihepatotoxic while menisdaurin has an anti-viral activity which needs its evaluation by an analytical method (UPLC-PDA method) that can be applied to the quality control of pharmaceutical preparations. The developed UPLC-PDA method was applied for identification and quantification of standards bergenin and menisdaurin in the methanol extract of F. virosa (FVME). The analysis was carried out using Eclipse C18 (4.6?×?100?mm, 3.5?µm) UPLC column. The optimized chromatographic condition was achieved at 0.16?mL/min flow rate using gradient system with acetonitrile and water as mobile phase. Both biomarkers were measured at λ_max 235?nm in PDA detector at ambient temperature. The developed method furnished sharp and intense peaks of menisdaurin and bergenin at Rt?=?2.723 and 3.068?min, respectively along with r2?>?0.99 for both. The recoveries of bergenin and menisdaurin were found in the range of 99.37–101.49% and 98.20–100.08%, respectively. With other validation data, including precision, specificity, accuracy, and robustness, this method demonstrated excellent reliability and sensitivity. The separation parameters i.e. retention, separation, and resolution factors for resolved standards (bergenin and menisdaurin) were >1, which showed good separation. The quantity of bergenin and menisdaurin in the FVME sample was found as 15.16 and 3.28% w/w, respectively. The developed UPLC-PDA method could be conveniently adopted for the routine quality control analysis.     

Use of designing for behaviour change framework in identifying and addressing barriers to and enablers of animal source feeding to children ages 8–23 months in Bandarban Hill District in Bangladesh: Implications for a nutrition-sensitive agriculture programme

Inadequate diet quality is a cause of undernutrition among children 6–23 months of age in Bangladesh, particularly in remote and isolated areas such as Bandarban District. Feeding animal source foods can help to combat stunting and wasting problems among children, but it may not be accessible or acceptable. A barrier analysis using the Designing for Behavior Change Framework was conducted in Bandarban district with participants from 4 ethnic groups, to explore potential barriers and key motivators by examining 12 behavioural determinants of consumption of animal-source food in complementary feeding for children 8–23 months. Data were collected from 45 mothers of children 8–23 months, who provided animal-source foods to their children (doers), and from 45 mothers who did not (non-doers), for a total of 90 interviews. Nine determinants were statistically significantly different between doers and non-doers as follows: self-efficacy, positive consequences, negative consequences, social norms, access, reminders, perceived risk, perceived severity and perceived action efficacy. Nearby access to purchase animal-source foods, rearing poultry or livestock at home and the support of household and community members are enablers to feeding animal-source food. In contrast, these same factors are barriers for non-doers. The lack of money to spend on animal-source foods is also a barrier. An integrated nutrition-sensitive and gender-transformative animal-based food production, and inclusive market programme could increase access to meat and eggs at the household level, increase opportunities to earn income and support gender-equitable household workloads and decision-making for optimal child feeding.     

The Effect of Tropical Environment on Fatigue Failure in Royal Malaysian Airforce (RMAF) Aircraft Structure and Operational Readiness

The environmental condition in which the Royal Malaysian Airforce is currently operating its aircraft is prone to corrosion. This is due to the high relative humidity and temperature. With most of its aircraft being in the legacy aircraft era, the aircraft’s main construction consists of the aluminium 2024 material. However, this material is prone to corrosion, thus reducing fatigue life and leading to fatigue failure. Using the concept of either Safe Life or Damage Tolerance as its fatigue design philosophy, the RMAF adopts the Aircraft Structure Integrity Program (ASIP) to monitor its structural integrity. With the current problem of not having the structural limitation on corrosion-damaged structure, the RMAF has embarked on its fatigue testing method. Finite Element (FE) studies and flight tests were conducted, and the outcome is summarized. The conclusion is that the longeron tested on the aircraft can withstand the operational load, and its yield strength is below the ultimate yield strength of the material. These research outcomes will also enhance the ASIP for other aircraft platforms in the RMAF fleet for its structure life assessment or service life extension program.     

Tuning the mechanical properties of silicene nanosheet by auxiliary cracks: a molecular dynamics study

Silicene has become a topic of interest nowadays due to its potential application in various electro-mechanical nanodevices. In our previous work on silicene, fracture stresses of single crystal and polycrystalline silicene have been investigated. Existence of defects in the form of cracks reduces the fracture strength of silicene nanosheets to a great extent. In this study, an engineering way has been proposed for improving the fracture stress of silicene nanosheets with a pre-existing crack by incorporating auxiliary cracks symmetrically in a direction perpendicular to the main crack. We call this mechanism the “Failure shielding mechanism”. An extensive molecular dynamics simulation based analysis has been performed to capture the atomic level auxiliary crack-main crack interactions. It is found that the main crack tip stress distribution is significantly changed with the presence of auxiliary cracks for loading along both armchair and zigzag directions. The effects of temperature and the crack propagation speed of silicene have also been studied. Interestingly, in the case of loading along the zigzag direction, SW defect formation is observed at the tip of main crack. This leads to a reduction of the tip stress resulting in a more prominent failure shielding in case of zigzag loading than in armchair loading. Moreover, the position and length of the cracks as well as the loading directions have significant impacts on the tip stress distribution. Finally, this study opens the possibilities of strain engineering for silicene by proposing an engineering way to tailor the fracture strength of silicene.

Inclusion of auxiliary cracks increases the fracture stress of silicene nanosheets with a pre existing crack.     

Adsorption of methylene blue and tetracycline onto biomass-based material prepared by sulfuric acid reflux

The adsorptive removal of environmental pollutants is an effective method for the treatment of contaminated water. Thus, the preparation of adsorbents from low-cost, readily available, and renewable resources has garnered immense attention in recent years. In this study, a facile one-step method for the preparation of a high-capacity adsorbent is demonstrated by refluxing pine cones in concentrated sulfuric acid. With sulfuric acid reflux, the pine cones undergone carbonization as well as functionalization with sulfonic acid groups. The adsorbent demonstrated high adsorption capacity for two emerging organic pollutants, methylene blue (MB) and tetracycline (TC). Different variables such as pH, temperature, contact time, and initial concentration of the pollutants were analyzed and showed that the adsorption capacity for MB increased in a basic pH and vice versa for TC. Also, the elevated temperature favored the adsorption for both MB and TC. The maximum adsorption capacity was found to be 1666.66, and 357.14 mg g⁻¹ for MB and TC, respectively. In comparison to the pristine pine cone, the sulfuric acid treated pine cone demonstrated an extraordinary improvement in the adsorption capacity. The adsorption of MB and TC was performed from the tap water matrix and similar adsorption capacities were found. A packed glass column was also prepared to demonstrate the adsorption of MB from tap water under flow conditions.

Facile conversion of pine cones into a high-capacity adsorbent for the removal of methylene blue and tetracycline from water.     

Effect of metal doping on the visible light absorption,electronic structure and mechanical properties of non-toxic metal halide CsGeCl3

Non-toxic metal halide perovskites have become forefront for commercialization of the perovskite solar cells and optoelectronic devices. In the present study, for the first time we show that particular metal doping in CsGeCl₃ halide can considerably enhance the absorbance both in the visible and ultraviolet light energy range. We have carried out DFT based first principles calculations on Mn-doped and Ni-doped CsGeCl₃ halide. We investigate the detailed structural, optical, electronic and mechanical properties of all the doped compositions theoretically. The study of the optical properties shows that the absorption edge of both Ni and Mn-doped CsGeCl₃ is shifted toward the low energy region (red shift) relative to the pristine one. An additional peak is observed for both doped profiles in the visible light energy region. The study of the mechanical properties demonstrates that both the doped samples are mechanically stable and ductile as the pristine CsGeCl₃. The study of the electronic properties shows that the excitation of photoelectrons is easier due to the formation of intermediate states in Mn-doped CsGeCl₃. As a result Mn-doped CsGeCl₃ exhibits higher absorptivity in the visible region than the Ni-doped counterpart. A combinational analysis indicates that CsGe_1−xMn_xCl₃ is the best lead free candidate among the inorganic perovskite materials for solar cell and optoelectronic applications.

We have studied the optical, electronic and mechanical properties of Ni and Mn-doped CsGeCl₃ using DFT calculations.     

Evaluation of residual stress and texture in isotope based Mg11B2 superconductor using neutron diffraction

Magnesium diboride (MgB₂) superconducting wires have demonstrated commercial potential to replace niobium–titanium (NbTi) in terms of comparable critical current density. Its higher critical temperature makes MgB₂ wire suitable for liquid-helium-free operation. We recently reported boron-11 isotope-based low-activation Mg¹¹B₂ superconducting wire with decent critical current density appropriate for low-cost superconducting fusion magnets. In this study, we have mainly focused on the neutron diffraction technique to measure the residual stress in Mg¹¹B₂ superconducting wire for the first time. The residual stress state was given qualitative and quantitative interpretation in terms of micro- and macrostress generation mechanisms based on the isotropic model confirmed by neutron texture measurements. The relationship between the stress/strain state in the wire and the transport critical current density is also discussed. This investigation could pave the way to further enhancement of the critical current density of low-activation Mg¹¹B₂ superconducting wires suitable for next-generation fusion grade magnets.

Magnesium diboride (MgB₂) superconducting wires have demonstrated commercial potential to replace niobium–titanium (NbTi) in terms of comparable critical current density.     

Diabetes mellitus,metabolic syndrome,and physical activity among Ethiopians: A systematic review

Background and aimsThe incidence of diabetes mellitus (DM) is increasing worldwide, and there is growing appreciation for the impact of limited physical activity on the disease. This study aimed to determine whether the current research on DM in Ethiopia has sufficiently identified and focused on the importance of limited physical activity according to the Global Physical Activity Questionnaire (GPAQ) in the disease etiology.MethodsThis was a systematic review, performed according to the PRISMA checklist. We searched primary studies of diabetes, diabetes-related complications, determinants, and magnitude of related morbidities in Ethiopia in PubMed, Medline, and ISI Web of Science databases. Reviews, editorial communications, reports, and letters were excluded.ResultsAmong 363 articles that were identified from all databases, 28 were included. It was found that 39% of the studies measured and included limited physical activity as a predisposing lifestyle factor in diabetes, while 17.86% either did not report or did not include this variable at all. Although 42.86% of the studies identified limited physical activity as an etiological factor in diabetes, it was not measured according to the GPAQ guidelines.ConclusionsThese data suggest that Ethiopian researchers do not give sufficient attention to the role of physical activity and its definition per GPAQ as a preventative factor for reducing the severity of diabetes symptoms. We suggest that physical activity research and promotion should be advocated in Ethiopia, and that researchers should seek advice on how to re-frame their work in the future.