Oxalic acid under adhesive restorations as a means to reduce dentin sensitivity: a four-month clinical trial

The aim of this double-blind randomized controlled clinical trial was to evaluate the reduction of dentin sensitivity using an oxalate-based compound, placed under adhesive restorations, during a four-month period. One hundred three preoperatively sensitive teeth, on 36 patients aged 25-66 years (mean, 40.3±7), were included in the study. Group A (experimental) was treated with oxalic acid (BisBlock) before resin-based composite (RBC) restorations (n=52), and group B (control) was treated with distilled water before RBC restorations (n=51). The first tooth in each patient was randomly assigned to group A, and the second tooth received group B. Clinical evaluation as made by a thermal/evaporation test with an air syringe and measurement by visual analog scale (VAS) at baseline and four months after treatment. The results showed sensitivity reduction during the evaluation period (expressed in VAS values): group A, 7.6 to 0.8; group B, 7.3 to 2.6. We concluded from this study that both treatments reduced dentin sensitivity during the evaluation period, with group A showing significantly less dentin sensitivity after four months (p<0.05).     

Vertical palatal bone dimensions on lateral cephalometry and cone-beam computed tomography: implications for palatal implant placement

Objectives: To evaluate the necessity of three‐dimensional imaging (computed tomography [CT]/cone‐beam computed tomography [CBCT]) for paramedian insertion of palatal implants. Material and methods: Lateral radiographs and CBCT scans were performed from 18 human skulls. For lateral cephalometry, the nasal floor (right/left) and the oral hard palate of all skulls were lined with a tin foil for contrast enhancement. The quantity of vertical bone as measured on lateral radiographs was compared with CBCT measurements obtained in median and parasagittal planes and at minimum bone height. Spearman's rank correlation coefficients were determined for bivariate correlation analysis. Results: The median palatal bone height on CBCT (mean 8.98 mm; standard deviation [SD] 3.4) was markedly higher than the vertical height seen on lateral radiographs (mean 6.6 mm; SD 3.2). Comparing lateral cephalometry with CBCT, the strongest association was observed at the minimum palatal bone height (r=0.926; P<0.001; Spearman's rank correlation coefficient). Conclusions: Lateral radiographs allow accurate and adequate assessment of vertical bone before paramedian insertion of palatal implants. The vertical bone dimension as displayed on lateral cephalometry reflects the minimum bone height rather than maximum bone in the median plane. Therefore, a preoperative CT or CBCT is only indicated when the lateral cephalometry reveals a marginal quantity of bone. To cite this article:
Jung BA, Wehrbein H, Heuser L, Kunkel M. Vertical palatal bone dimensions on lateral cephalometry and cone‐beam computed tomography: implications for palatal implant placement.
Clin. Oral Impl. Res. 22 , 2011; 664–668
doi: 10.1111/j.1600‐0501.2010.02021.x     

Treatment strategy for patients with ectodermal dysplasia: a case report

Ectodermal dysplasia (ED) is a hereditary condition characterized by abnormal development of the skin, hair, nails, sweat glands, and the stomatognathic system. There are many different types of ectodermal dysplasia of which X-linked anhidrotic ectodermal dysplasia is the most common. Multiple genes have been discovered to cause ectodermal dysplasias. With any form of ED, children may display a range of symptoms and challenging rehabilitation. This clinical report presents the treatment plan for a young patient with ED and anodontia requiring prosthetic restoration.     

Adhesion of composite resin to etched glass ionomer cement

A laboratory study was undertaken to determine the tensile bond strengths of three glass ionomer cements to dentine and the tensile bond strengths of composite to the three glass ionomers after etching. The tensile bond strength to untreated dentine was in the range of 4.47–5.52 MPa, being approximately twice that of a glass ionomer restorative material. After etching the glass ionomer, the bond strength to composite resin ranged from 1.83 MPa to 6.17 MPa, depending on the ionomer and on the time after mixing at which it was etched. In the majority of clinical situations, retention of a composite restoration via etched glass ionomer cement would probably need to be supplemented by additional mechanical retention.     

Histomorphometric and fluorescence microscopic analysis of bone remodelling after installation of implants using an osteotome technique

The influence of the osteotome technique on the osseointegration of rough-surfaced stepped cylinder implants (Frialit)-2) was compared to conventional preparation of the implant site in an animal model. A total of 104 implants were placed into the distal femoral condyle of 52 New Zealand white rabbits. This region contains sufficient trabecular bone for implant placement. The implant site was prepared either by the osteotome technique or by conventional technique with drills as a control group. During the healing period polychromatic fluorescence labelling was performed with four different fluorescent dyes. After 2, 4 and 8 weeks, the implants were removed with the surrounding bone. The sample preparation was done using the 'sawing and grinding' technique. Ground sections 100 microm thick were used for fluorescence microscopic analysis; 30- microm-thick ground sections were examined histomorphometrically. After 2 weeks the bone-to-implant contact ratio was 55.0 +/- 7.1% for the osteotome technique and 29.2 +/- 4.8% for the control group (P < 0.0005). After 4 weeks, the bone-to-implant contact ratio was still significantly better for the osteotome technique (bone-to-implant contact ratio osteotome technique 71.1 +/- 7.2%, bone-to-implant contact ratio control 59.0 +/- 6.3%, P = 0.003). Eight weeks after implant placement the bone-to-implant contact ratio was still better for the osteotome technique compared to the conventional implant placement. However it was no longer statistically significant. The qualitative fluorescence microscopic examination showed an earlier and stronger signal for the osteotome technique than the control group. With the latter, the zone of mineralization moved slowly towards the implant surface. Implant sites prepared by the osteotome technique showed a pronounced signal in the whole compressed area already by the second day. In conclusion, the osteotome technique increases new bone formation and leads to an enhanced osseointegration of dental implants in trabecular bone. However, more experimental trials have to be carried out on higher mammals that show a metabolic rate of bone that is more comparable to humans.     

Multi-center clinical comparison of combination anorganic bovine-derived hydroxyapatite matrix (ABM)/cell binding peptide (P-15) and ABM in human periodontal osseous defects. 6-month results

BACKGROUND: Intraosseous periodontal defects present a particular treatment problem. New bone replacement grafts offer promise for improved results. METHODS: The role of a synthetic cell-binding peptide (P-15), combined with anorganic [corrected] bovine-derived hydroxyapatite bone matrix (ABM), was compared to ABM alone in human periodontal osseous defects in a controlled, monitored, multi-center trial. Following appropriate initial preparation procedures, flap surgery with defect and root debridement was performed. Two osseous defects per patient were treated randomly with each procedure after surgical preparation. Appropriate periodontal maintenance schedules were followed, and at 6 to 7 months, re-entry flap surgery was performed for documentation and finalization of treatment. RESULTS: T test and Mann-Whitney U analyses of patient mean values from 33 patients revealed that the combination ABM/P-15 grafts demonstrated significantly better mean defect fill of 2.9 +/- 1.2 mm (72.9%) versus a mean defect fill of 2.2 +/- 1.4 mm (50.67%) for defects treated with ABM (P<0.05). Other hard tissue findings showed similar clinically superior results with the use of ABM/P-15. Relative defect fill results showed 81% positive (50% to 100% defect fill) responses with ABM/P-15 and 67% positive responses with ABM. There were 3.5 times as many optimal results (> or = 90% defect fill) with ABM/P-15 and twice as many failures (minimal response) with ABM. Soft tissue findings showed no significant differences between treatments. CONCLUSIONS: These results suggest that the use of the P-15 synthetic cell-binding peptide combined with ABM yields better clinical results than the ABM alone in intrabony periodontal defects.     

Myositis ossificans traumatica of the masseter muscle: Review of the literature and report of two additional cases

Myositis ossificans traumatica of the masseter muscle is uncommon. The condition is benign and results in reactive heterotopic bone formation, usually producing limitation of opening of the jaws. Radiographic and microscopic examination can confirm the diagnosis. Treatment of myositis ossificans traumatica of the masseter muscle is surgical, with other modalities used when occurring in other muscles of the body     

Resistance to fracture of restored endodontically treated teeth

Abstract Endodontically treated teeth were restored by 8 different methods. Copper rings were filled with commercial hard setting cement and the teeth were placed into the cement to the level of the cemento-enamel junction. The teeth were grouped according to restorative methods, mounted in an Instron T.T. machine and subjected to a slowly increasing compressive force until fracture occurred. The force of fracture for each tooth was recorded and the results in the various groups compared. All teeth fractured in a similar manner, irrespective of restorative method used. Preparation of a post space in the roots significantly weakened the teeth. Cementation of a steel parapost with zinc oxyphosphate cement did not significantly strengthen the teeth. Filling the post space and the access cavity with a composite resin following acid etching of the root canal and cavity walls strengthened the teeth more than other methods used to restore them. This finding may be of clinical importance, for instance in the restoration of endodontically treated young teeth with incomplete root formation and wide root canals.