Increasing the rate of the hydrogen evolution reaction in neutral water with protic buffer electrolytes

Electrocatalytic generation of H₂ is challenging in neutral pH water, where high catalytic currents for the hydrogen evolution reaction (HER) are particularly sensitive to the proton source and solution characteristics. A tris(hydroxymethyl)aminomethane (TRIS) solution at pH 7 with a [2Fe-2S]-metallopolymer electrocatalyst gave catalytic current densities around two orders of magnitude greater than either a more conventional sodium phosphate solution or a potassium chloride (KCl) electrolyte solution. For a planar polycrystalline Pt disk electrode, a TRIS solution at pH 7 increased the catalytic current densities for H₂ generation by 50 mA/cm² at current densities over 100 mA/cm² compared to a sodium phosphate solution. As a special feature of this study, TRIS is acting not only as the primary source of protons and the buffer of the pH, but the protonated TRIS ([TRIS-H]⁺) is also the sole cation of the electrolyte. A species that is simultaneously the proton source, buffer, and sole electrolyte is termed a protic buffer electrolyte (PBE). The structure–activity relationships of the TRIS PBE that increase the HER rate of the metallopolymer and platinum catalysts are discussed. These results suggest that appropriately designed PBEs can improve HER rates of any homogeneous or heterogeneous electrocatalyst system. General guidelines for selecting a PBE to improve the catalytic current density of HER systems are offered.

Molecular hydrogen (H₂), a clean-burning and energy-dense fuel source, has been widely discussed as an attractive way to store intermittent energy from solar and wind through water electrolysis (1, 2). Current commercial electrolyzers can be separated into two categories based on their operating pH. The first are acidic polymer electrolyte membrane electrolyzers that work best with rare and expensive platinum-based electrocatalysts for the hydrogen evolution reaction (HER) (3). The second are strongly alkaline electrolyzers that suffer from caustic basic reaction conditions (4). Neutral pH conditions with inexpensive catalysts composed of Earth-abundant elements are a target for practical solar-to-hydrogen fuel devices due to lower cost and fewer safety concerns (5), but achieving fast rates with mild overpotentials under neutral conditions remains a challenge (6–12). In the pH range from 5 to 9, the electrocatalytic activity of platinum (Pt) itself does not conform to the expected thermodynamic potential shift with pH dependence of −59 mV/pH (13). This is due to the low concentration of the hydronium ion in this pH range and a transition to water as the primary reactant, which has a higher thermodynamic requirement for hydrogen evolution (13). Studies of electrocatalysts using buffers to maintain the pH in this range and ionic salts such as potassium chloride (KCl) to provide ionic strength to ensure high solution conductivity have shown that the buffer can aid the HER activity, presumably by acting as a proton donor (6, 14–18). To extend the scope of water-soluble electrocatalysts, biopolymers and bioinspired metallopolymer catalysts have also been studied (7, 12, 17–26). Bren and coworkers recently reported particularly enlightening studies of the effects of buffer pK_a and structure on the mechanism of the hydrogen evolution reaction for cobalt minienzymes (17, 18).We recently reported a new metallopolymer catalyst system built around a customized [2Fe-2S] catalyst site with a bridging aryldithiolato ligand which exhibits remarkable catalytic activity, air stability, and chemical stability (21). The electrocatalytic mechanism of the [2Fe-2S] catalysts with aryldithiolato ligands is known from previous studies and these catalysts operate at rates of 10⁵ s⁻¹ and faster (27–30). The readily synthesized and water-soluble metallopolymer composed of tertiary amine side-chain groups, PDMAEMA-g-[2Fe-2S] (Fig. 1), approached the current density of Pt operating in neutral water under the same conditions and matched the Faradaic yield (97 ± 3%) (21). Although the detailed structural and mechanistic causality of these profound improvements for these metallopolymer electrocatalysts remain subjects of study, the nature of this molecular system is ideal for studying solution effects on the HER reaction at neutral pH for complexes that are normally insoluble in water. In the course of characterizing these electrocatalysts, solutions containing tris(hydroxymethyl)aminomethane (TRIS) at pH 7 were discovered to be exceptionally advantageous to the catalytic rate. In contrast to the few previous studies of TRIS buffer with electrocatalysts (14, 15, 18), we utilized TRIS at a high concentration. At pH 7, TRIS is sufficiently in the cationic protonated form that additional electrolyte such as KCl is not needed for conductance. This important distinction from conventional studies allows TRIS to simultaneously play the roles of pH buffer, proton source, and sole electrolyte. There is precedence in employing buffers in a manner in which they are the sole electrolyte (7, 31–34). Referring to such species simply as a “buffer” or as an “electrolyte” is inadequate in representing the three functions including proton source. For the purposes of this paper we term a species that serves all three functions a protic buffer electrolyte (PBE). In the following discussion, a TRIS PBE solution is one in which [TRIS-H]⁺Cl⁻ is the sole electrolyte and the cation is a proton source, and a sodium phosphate PBE solution is one in which Na⁺[H₂PO₄]⁻ is the sole electrolyte and the anion is a proton source.Open in a separate windowFig. 1.(A) Depiction of the 2e⁻ electrocatalytic HER with POEGMA-g-[2Fe-2S] and/or PDMAEMA-g-[2Fe-2S] metallopolymers using TRIS or sodium phosphate protic buffer electrolytes at pH 7. (B) Image of POEGMA-g-[2Fe-2S] with MW = 14,216 grown in silico. The [2Fe-2S] active site is in the center of the polymer, blue represents the polymer backbone, and the rest are the oligo(ethylene glycol) side chains. See SI Appendix for the details of modeling and a larger image.One of the key unanswered questions for these new catalyst systems is whether the metallopolymer composition (i.e., amine side-chain groups) or the PBEs are more important to afford this outstanding catalytic activity. Herein we study the effects of PBEs by comparing the HER performances of a standard platinum catalyst and a [2Fe-2S] metallopolymer catalyst in TRIS PBE solutions, sodium phosphate PBE solutions, and a KCl electrolyte solution without a PBE. For this study, nonionic water-soluble metallopolymers were used, which were made using oligo(ethylene glycol) side-chain groups on the polymer to avoid the possibility of contributing effects of the protonated amino groups of PDMAEMA-g-[2Fe-2S] referred to earlier. The metallopolymer catalyst used in this work is designated as POEGMA-g-[2Fe-2S] (Fig. 1). We previously reported that this water-soluble metallopolymer was largely inactive for H₂ electrocatalysis at neutral pH in phosphate buffer (22). The current findings suggest that the use of electrolytes composed of inexpensive cationic organic proton donors can be readily applied to any homogeneous or heterogeneous electrocatalyst system as a facile means to enhance HER activity.     

Association between periodontitis and medication-related osteonecrosis of the jaw: A systematic review and meta-analysis

Consensus has yet to be reached about the prevention and treatment of medication-related osteonecrosis of the jaw (MRONJ), which is a treatment sequela of several antiresorptive therapies and other pharmaceutical interventions. Several epidemiologic studies have identified periodontal disease (PD) as a risk factor for this outcome. Thus, the objective of this systematic review and meta-analysis was to investigate this association and its magnitude. A systematic search in MEDLINE via PubMed, Scopus and ISI Web of Science, and a meta-analysis were undertaken. Observational studies that gathered information regarding prefixed definitions for both outcomes were selected, and the relevant information was then extracted, and their risk of bias was evaluated using the Newcastle-Ottawa Scale. The protocol of the study was registered on PROSPERO (CRD42019125646). The initial search yielded 757 eligible records, of which 12 were deemed adequate for inclusion (5 cohort studies and 7 case-control studies). On a random-effects meta-analysis, the risk of PD in MRONJ-affected sites compared with at-risk non-affected patients was significantly greater, with a risk ratio of 2.75 (95% CI: 1.67-4.52). Nonetheless, from a pooled analysis of three standardized periodontal measures (ie plaque index, clinical attachment loss and probing depth) no significant results were obtained. MRONJ appears to be associated with an increase in prevalence of PD. The direction of this association, and the factors influencing it must be investigated using further prospective data, and likewise, the possibility for using periodontal therapy as a prevention strategy must be looked into. Periodontal screening needs to be made an indispensable requisite for clinicians in order to establish a correct multidisciplinary approach in MRONJ.     

The Psychotherapy Outcome Problem: The Development of the Outcome Stability Index

Objective: Psychotherapy research commonly utilizes clients’ last session score as an indicator of treatment outcome. We examined whether this last session score is consistent with what would be predicted based on clients’ general trajectory in psychological functioning across sessions. We focused on the unstandardized residual variance at the last session, as this represents the degree to which the session score is divergent (or not) from what is predicted from the previous sessions (i.e., Outcome Stability Index; OSI). Method: The sample included 27,958 clients who attended on average 9.41 sessions. Each session, clients completed the Behavioral Health Measure-20 as a measure of psychological functioning. We converted the unstandardized residual variance for clients’ last session score into a Cohen’s d coefficient to aid in interpretation. Results: The mean OSI was 0.07 (SD?=?0.58), suggesting excellent stability in their last session therapy outcome scores. However, approximately 33% of clients demonstrated poor or extremely problematic stability in their last session therapy outcome scores. Clients who demonstrated poor stability were classified as demonstrating reliable deterioration. Conclusions: Researchers may want to consider reporting OSI to assist readers’ understanding of the stability of therapy outcomes.

Clinical or methodological significance of this article: Therapy outcome scores can vary from session to session, which can influence how we understand therapy outcomes that rely on last session scores. Studies examining therapy outcomes could report the Outcome Stability Index to better contextualize the results.     

The Effect of Sacrificing the Posterior Cruciate Ligament in Total Knee Arthroplasties That Use a Highly Congruent Polyethylene Component

Background

There is continued debate regarding retention versus sacrificing of the posterior cruciate ligament (PCL) in total knee arthroplasty (TKA). We sought to determine if there was a difference in range of motion (ROM) after TKA between patients with PCL sacrifice versus PCL retention when using a highly congruent polyethylene insert.

The Impact of Comprehensive Care for Joint Replacement Bundled Payment Program on Care Delivery

Background

Comprehensive Care for Joint Replacement (CJR) is a Medicare initiative to test the impact of holding a hospital accountable for services provided during an episode of care for a lower extremity joint arthroplasty on costs and quality. This study examines whether hospital participation in CJR is associated with having programs focused on improving posthospitalization care or reducing costs using a survey of orthopedic surgeons.

Mortality Rate and Mid-Term Outcomes of Total Hip Arthroplasty Using Dual Mobility Cups for the Treatment of Femoral Neck Fractures in a Middle Eastern Population

Background

The dual mobility cups (DMCs) were shown to reduce dislocation rate following total hip arthroplasty for any etiology, including femoral neck fractures. No reported studies evaluating DMC results for femoral neck fracture in a Middle Eastern population were found in the literature.

Liver Transplant From Controlled Cardiac Death Donors Using Normothermic Regional Perfusion: Comparison With Liver Transplants From Brain Dead Donors

Background

Liver transplantation from donors after either controlled or uncontrolled cardiac death (DCD) is associated with considerable rates of primary nonfunction (PNF) and ischemic cholangiopathy (IC). Normothermic regional perfusion (NRP) could significantly reduce such rates.

Clinical and subclinical cardiovascular disease in female SLE patients: Interplay between body mass index and bone mineral density

Background and aims

Since accelerated atherosclerosis has been reported in systemic lupus erythematosus (SLE), predictive biomarkers of cardiovascular disease (CVD) are needed. Among non-traditional risk factors, bone mineral density (BMD) has been related to CVD. However, its role in SLE remains controversial. This study aims to analyze the associations of subclinical atherosclerosis with traditional and non-traditional CV risk factors.

Long-Term Implications of Atrial Fibrillation in Patients With Degenerative Mitral Regurgitation

Background

Scientific guidelines consider atrial fibrillation (AF) complicating degenerative mitral regurgitation (DMR) a debated indication for surgery.

Sham-Controlled Randomized Trials of Catheter-Based Renal Denervation in Patients With Hypertension

Background

There are conflicting data regarding the relative effectiveness of renal sympathetic denervation (RSD) in patients with hypertension.