Fabrication of Large-Area Mullite–Cordierite Composite Substrates for Semiconductor Probe Cards and Enhancement of Their Reliability

This work aims to fabricate a large-area ceramic substrate for the application of probe cards. Mullite (M) and cordierite (C), which both have a low thermal expansion coefficient, excellent resistance to thermal shock, and high durability, were selected as starting powders. The mullite–cordierite composites were produced through different composition ratios of starting powders (M:C = 100:0, M:C = 90:10, M:C = 70:30, M:C = 50:50, M:C = 30:70, and M:C = 0:100). The effects of composition ratio and sintering temperature on the density, porosity, thermal expansion coefficient, and flexural strength of the mullite–cordierite composite pellets were investigated. The results showed that the mullite–cordierite composite pellet containing 70 wt% mullite and 30 wt% cordierite sintered at 1350 °C performed exceptionally well. Based on these findings, a large-area mullite–cordierite composite substrate with a diameter of 320 mm for use in semiconductor probe cards was successfully fabricated. Additionally, the changes in sheet resistance and flexural strength were measured to determine the effect of the environmental tests on the large-area substrate such as damp heat and thermal shock. The results indicated that the mullite–cordierite composite substrate was extremely reliable and durable.     

Al2O3-Coated Si-Alloy Prepared by Atomic Layer Deposition as Anodes for Lithium-Ion Batteries

Silicon-based anodes can increase the energy density of Li-ion batteries (LIBs) owing to their large weights and volumetric capacities. However, repeated charging and discharging can rapidly deteriorate the electrochemical properties because of a large volume change in the electrode. In this study, a commercial Fe-Si powder was coated with Al₂O₃ layers of different thicknesses via atomic layer deposition (ALD) to prevent the volume expansion of Si and suppress the formation of crack-induced solid electrolyte interfaces. The Al₂O₃ content was controlled by adjusting the trimethyl aluminum exposure time, and higher Al₂O₃ contents significantly improved the electrochemical properties. In 300 cycles, the capacity retention rate of a pouch full-cell containing the fabricated anodes increased from 69.8% to 72.3% and 79.1% depending on the Al₂O₃ content. The powder characterization and coin and pouch cell cycle evaluation results confirmed the formation of an Al₂O₃ layer on the powder surface. Furthermore, the expansion rate observed during the charging/discharging of the pouch cell indicated that the deposited layer suppressed the powder expansion and improved the cell stability. Thus, the performance of an LIB containing Si-alloy anodes can be improved by coating an ALD-synthesized protective Al₂O₃ layer.     

Monthly and seasonal variations in vestibular neuritis

Seasonal variations in vestibular neuritis (VN) could support the etiology of viral infection. However, several recent studies revealed no significant seasonal variations in VN. Further studies are necessary to determine the etiology of VN. We analyzed patients with VN to evaluate monthly and seasonal variations. Patients with VN who visited our otorhinolaryngology department or were referred to our department from the emergency department between March 2014 and February 2019 were included retrospectively in this study. Differences among the months and seasons of VN visits were analyzed. Patients were divided into 2 groups according to sex and age (65 years or older and younger than 65 years). Differences among the months and seasons of VN visits were analyzed between groups. There were no significant differences in monthly and seasonal distributions in 248 patients with VN. There were also no significant differences in monthly and seasonal distributions in male and female patients or in older and younger patients. There were no significant differences in monthly or seasonal distributions of patients with VN. Factors other than viruses, such as vascular ischemia, should also be considered in the incidence of VN, especially in older patients.     

Comparison of Initial Presentation of Pediatric Diabetes Before and During the Coronavirus Disease 2019 Pandemic Era

BackgroundHospital visitation has become challenging during the coronavirus disease 2019 pandemic because of quarantine measures and fear of infection. Consequently, newly diagnosed patients may present with more severe diseases during the pandemic. The present study analyzed the differences in the initial clinical presentations of newly diagnosed patients with type 1 diabetes (T1D) and type 2 diabetes (T2D), comparing pre-pandemic and pandemic periods.MethodsNewly diagnosed patients with T1D or T2D and aged < 18 years during 2018–2020 were included in the study. Data were collected retrospectively from four academic centers in Gyeonggi-do, South Korea. Initial clinical data were compared between the pre-pandemic (2018–2019) and pandemic (2020) periods.ResultsIn the pre-pandemic and pandemic periods, 99 patients (41 T1D and 58 T2D patients) and 84 patients (51 T1D and 33 T2D patients) were identified, respectively. During the pandemic, the proportion of diabetic ketoacidosis (DKA) cases increased compared to the pre-pandemic period (21.2% during 2018–2019 vs. 38.1% in 2020; P = 0.012). In the pre-pandemic and pandemic periods, initial pH was 7.32 ± 0.14 and 7.27 ± 0.15, respectively (P = 0.040), and HbA1c values were 11.18 ± 2.46% and 12.42 ± 2.87%, respectively (P = 0.002). During the pandemic, there was an increased risk of DKA in patients with T1D (odds ratio, 2.42; 95% confidence interval, 1.04–5.62; P = 0.040).ConclusionDuring the pandemic, the proportion of DKA in newly diagnosed patients with T1D increased and clinical parameters showed a deteriorating pattern. Increased awareness of pediatric diabetes, especially DKA, could facilitate visit to the hospital for an early diagnosis; thus, reducing the number of DKA cases during the pandemic era.     

Antimicrobial second skin using copper nanomesh

The functional support and advancement of our body while preserving inherent naturalness is one of the ultimate goals of bioengineering. Skin protection against infectious pathogens is an application that requires common and long-term wear without discomfort or distortion of the skin functions. However, no antimicrobial method has been introduced to prevent cross-infection while preserving intrinsic skin conditions. Here, we propose an antimicrobial skin protection platform copper nanomesh, which prevents cross-infectionmorphology, temperature change rate, and skin humidity. Copper nanomesh exhibited an inactivation rate of 99.99% for Escherichia coli bacteria and influenza virus A within 1 and 10 min, respectively. The thin and porous nanomesh allows for conformal coating on the fingertips, without significant interference with the rate of skin temperature change and humidity. Efficient cross-infection prevention and thermal transfer of copper nanomesh were demonstrated using direct on-hand experiments.

The functional support and advancement of our body while preserving the inherent naturalness is one of the ultimate goals of bioengineering (1–4). A functional layer is placed on the skin to complement the intrinsic biological and interactive functions (5, 6) and to add functions that do not yet exist (7–9). During use, the second skin layer should completely exploit its function and underlay skin functions without deforming the skin or interfering with the skin’s external interaction. Materials and structures need to be conformal and mechanically similar to the skin to minimize the distortion of natural sensations and movements. In addition, the air and heat transfer on the skin must be unimpeded to obtain a natural and comfortable wear fit (10).Body protection that requires common and long-term wear is an application in which both functionality and naturalness are important. As the outermost layer connecting our body to the environment, the skin is exposed to physical damage, hazardous chemicals, and infectious pathogens (11, 12). Therefore, we add a protective layer on the skin that blocks or filters out external contaminants. This entails the isolation and accumulation of biochemical compounds, which can lead to self-contamination and the subsequent cross-contamination/infection by interacting with other objects. In contrast to chemical contamination, which is not self-reproductive, the biological contamination of infectious microbes, such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is a considerable issue to be addressed.By containing an antimicrobial material on the surface of the skin protective layer, cross-infection can be prevented in the long term. Unlike temporary rinsing or disinfection, the use of antibacterial or antiviral substances such as chemical or natural disinfectants and metal nanomaterials inhibits the growth of microorganisms on the surface (13–17). These materials are embedded in a complete covering polymer layer, such as gloves (18, 19), to isolate and protect both the inner and outer surfaces from the infection. To add breathability to the textile especially for the mask (13, 20, 21), many antibacterial fibers have been developed based on these materials. Moreover, various skin-attachable platforms with antimicrobial properties have been developed for convenient usage in daily lives. Antimicrobial nanofibers with conformal attachment to the skin have been developed for drug delivery, wound healing (22, 23), and electrophysiology (24, 25). In addition, stretchable and antibacterial hydrogels have been developed to allow more natural skin movement in wound-healing applications (26–28).However, there has been no practical skin protective solution to prevent cross-infection while preserving intrinsic skin conditions such as surface morphology, thermal transfer, and skin humidity. The thickening of the additional skin layer frequently results in a significant modification of the surface morphology, heat transfer, and the corresponding sensation. Thin layers have limited performance in terms of antimicrobial duration and speed. The skin coverage of polymer or hydrogel film blocks the transfer of air, moisture, and heat. In addition, the antimicrobial performance is focused on the skin side rather than the external side that affects cross-infection. Voids owing to the stiffness of the film or fiber and morphological differences compared to the skin further limit conformality, heat transfer, and water/air permeability (29).Here, we propose an antimicrobial skin protection platform copper nanomesh, which prevents cross-infection while minimizing modification of intrinsic skin properties such as interfacial morphology, temperature change rate, and skin humidity. The thin thickness and porous structure of the nanomesh allow conformal attachment to the fingertips, regardless of the mechanical and structural variations of the fingerprints, nails, and interfaces. To impart antimicrobial properties, copper, one of the most well-known antimicrobial (nano)materials (30–33), was coated with maintaining the nanomesh structure (copper nanomesh, from here onward). The measured inactivation rates of copper nanomesh against Escherichia coli bacteria and influenza virus A (H1N1) were 99.99% within 1 min and 10 min, respectively. It was found that the nanomesh structure contributed to the acceleration of bacterial inactivation compared to the copper film. Furthermore, it exhibited high biocompatibility with the skin cells and stable antibacterial performance even after long-term use (more than 6 h), including water immersion (more than 1 h).In addition, we investigated the naturalness of the copper nanomesh compared to that of the copper film and conventional gloves. As confirmed using the artificial skin and fingerprint recognition, the proposed copper nanomesh exhibited a higher conformability compared to that of the copper film. The copper nanomesh showed a high hydrophobicity to block external contaminants in solution while having high gas permeability and maintaining the skin humidity in a safe range. Additionally, the insertion of copper nanomesh did not affect the temperature change rate, which is important to maintain the sensation and comfort fit of the skin. Finally, the copper nanomesh was compared to the glove by wearing on our hands and interacting with various real-life objects. Using the proposed copper nanomesh, we successfully achieved an effective prevention of cross-infection and less-hindered thermal recognition of objects.     

User- and Message-Level Correlates of Endorsement and Engagement for HIV-Related Messages on Twitter: Cross-sectional Study

BackgroundYouth and young adults continue to experience high rates of HIV and are also frequent users of social media. Social media platforms such as Twitter can bolster efforts to promote HIV prevention for these individuals, and while HIV-related messages exist on Twitter, little is known about the impact or reach of these messages for this population.ObjectiveThis study aims to address this gap in the literature by identifying user and message characteristics that are associated with tweet endorsement (favorited) and engagement (retweeted) among youth and young men (aged 13-24 years).MethodsIn a secondary analysis of data from a study of HIV-related messages posted by young men on Twitter, we used model selection techniques to examine user and tweet-level factors associated with tweet endorsement and engagement.ResultsTweets from personal user accounts garnered greater endorsement and engagement than tweets from institutional users (aOR 3.27, 95% CI 2.75-3.89; P<.001). High follower count was associated with increased endorsement and engagement (aOR 1.05, 95% CI 1.04-1.06; P<.001); tweets that discussed STIs garnered lower endorsement and engagement (aOR 0.59, 95% CI 0.47-1.74; P<.001).ConclusionsFindings suggest practitioners should partner with youth to design and disseminate HIV prevention messages on social media, incorporate content that resonates with youth audiences, and work to challenge stigma and foster social norms conducive to open conversation about sex, sexuality, and health.     

Can the patient pinpoint where the ingested fish bone is impacted?: A single-center,retrospective study

Among the plethora of foreign body impactions, fish bones are common examples that patients may struggle to properly disclose in clinical situations. This study investigated whether patients could pinpoint where the ingested fish bone was lodged. In addition, we investigated the differences between fish bone and other foreign bodies, the usefulness of computed tomography (CT), and the related risk factors for hospitalization. The cases of patients who underwent an endoscopic removal of fish bone between April 2008 and April 2020 were retrospectively reviewed. The clinical outcomes, X-ray scan, CT, and complications of each patient were investigated. A total of 96 patients were included in this study. The mean size of the impacted fish bone was 23.78 mm, and most were found in the upper esophagus (n = 38). There was a weak correlation between pain location and the actual lesion location (r = 0.419, P < .001). Compared to those of other foreign bodies, the location of impacted fish bones was different (P < .001), the X-ray detection rate of fish bones was lower (P < .001), and the complication incidence was higher (P = .030). CT (95.89%) showed higher sensitivity than X-ray scanning (11.24%) (P < .001). Foreign body size (P = .004) and door-to-endoscopy time (P = .029) were related to admission. Patients only managed to point out the approximate location of the ingested fish bone. CT detected fish bones well, but scans should include at least the entire esophagus instead of solely the area where pain is felt. Fish bone impaction has different clinical characteristics from other foreign bodies. Endoscopic removal without delay can reduce the admission rates.     

A Warhead Substitution Study on the Coronavirus Main Protease Inhibitor Nirmatrelvir

The SARS-CoV-2 pandemic is currently causing an unprecedented global health emergency since its emergence in December 2019. In December 2021, the FDA granted emergency use authorization to nirmatrelvir, a SARS-CoV-2 main protease inhibitor, for treating infected patients. This peptidomimetic is designed with a nitrile warhead, which forms a covalent bond to the viral protease. Herein, we investigate nirmatrelvir analogs with different warheads and their inhibitory activities. In addition, antiviral activities against human alphacoronavirus 229E was also investigated along with a cell-based assay. We discovered that the hydroxymethylketone and ketobenzothiazole warheads were equipotent to the nitrile warhead, suggesting that these analogs can also be used for treating coronavirus infections.