Relationships of varicella zoster virus (VZV)-specific cell-mediated immunity and persistence of VZV DNA in saliva and the development of postherpetic neuralgia in patients with herpes zoster

There are no surrogate markers for the development of postherpetic neuralgia (PHN) in patients with herpes zoster (HZ). All patients with HZ were prospectively enrolled to evaluate the associations of saliva varicella zoster virus (VZV) DNA persistence and VZV-specific cell-mediated immunity (CMI) with the development of PHN. Slow clearers were defined if salivary VZV DNA persisted after day 15. Salivary VZV was detected in 60 (85.7%) of a total of 70 patients with HZ on initial presentation. Of 38 patients for whom follow-up saliva samples were available, 26 (68.4%) were classified as rapid clearers and 12 (31.6%) as slow cleares. Initial VZV-specific CMI was lower in slow clearers than rapid clearers (median 45 vs 158 spot forming cells/10 ⁶ cells, P = .02). Of the 70 patients with HZ, 22 (31.4%) eventually developed PHN. Multivariate analysis showed that slow clearers (OR, 15.7, P = .01) and lower initial VZV-specific CMI (OR, 13.8, P = .04) were independent predictors of the development of PHN, after adjustment for age and immunocompromised status. Initial low VZV CMI response and persistence of VZV DNA in saliva may be associated with the development of PHN.     

Total alloplastic temporomandibular joint reconstruction combined with orthodontic treatment in a patient with idiopathic condylar resorption

This case report describes the successful treatment of an adult patient with skeletal Class II open-bite malocclusion secondary to idiopathic condylar resorption. Total alloplastic joint reconstruction and counterclockwise rotation of the maxillomandibular complex combined with orthodontic treatment provided a satisfying outcome with maximum functional and esthetic improvement.     

Evaluation of stress patterns generated by reduction forceps within a photoelastic mandibular model.

INTRODUCTION: Little attention has been paid to the mechanical effects of fracture reduction forceps. AIM: This study aims to evaluate the stress patterns within the fractured mandible generated by reduction forceps. MATERIAL AND METHODS: Thirty-six mandibular models were fabricated using a photoelastic resin. Each of the three sets of mandibular models was osteotomized according to one of three different fracture types. After reducing the cut segments, reduction forceps were placed into different engagement holes to compress the segments. Photoelastic stress analysis was used to visualize the stress patterns within the fractured mandibular models as generated by the reduction forceps. RESULTS: In the case of symphyseal or parasymphyseal fractures, an optimum distribution of stresses over the fracture site was achieved when placing the reduction forceps more than 12mm away from either side of the fracture line, between the midway level of the mandibular height (bisecting the mandible) and 5mm below this level. In the case of body fractures, optimum stress distribution was achieved when the reduction forceps were placed more than 16mm from the fracture line at the midway level. CONCLUSION: Correct use of the reduction forceps helps to provide a precise three-dimensional reduction for mandibular fractures.     

Thickness of posterior palatal masticatory mucosa: the use of computerized tomography

BACKGROUND: Periodontal plastic surgery is used to fulfill the esthetic and functional demands of patients. The palatal masticatory mucosa is the main donor site for connective tissue, and the thickness of the graft tissue obtained is an important factor for the success of this technique. The aim of this study was to measure the thickness of masticatory mucosa in the posterior palatal area using computerized tomography (CT). METHODS: The thickness measurements were performed on the images of 100 adult subjects who underwent CT on the maxilla for implant surgery. Twenty-four standard measurement points were defined in the hard palate according to the gingival margin and the middle palatal suture. The radiographic measurements were used after calibration. The data were analyzed to determine the differences in the mucosal thickness according to gender, age, tooth position, and depth of the palatal vault. RESULTS: The overall mean thickness of the palatal masticatory mucosa was 3.83 +/- 0.58 mm (range: 2.29 to 6.25 mm). Females had significantly thinner mean masticatory mucosa (3.66 +/- 0.52 mm) than males (3.95 +/- 0.60 mm) (P <0.0001). The thickness of the palatal masticatory mucosa increased with age. The mean thickness according to tooth site was 3.46 mm (maxillary canine), 3.66 mm (first premolar), 3.81 mm (second premolar), 3.13 mm (first molar), 3.31 mm (the base of the interproximal papilla of the first and second molars), and 3.39 mm (second molar). There was an overall increase in the thickness of the palatal masticatory mucosa as the distance from the gingival margin to the middle palatine suture increased, with the exception of the Ca-d (a point at 12 mm from the gingival margin of the canine) region. There was no significant difference in the thickness of the palatal masticatory mucosa between the groups with high or low palatal vaults. CONCLUSIONS: The palatal masticatory mucosa thickness increased from the canine to premolar region but decreased at the first molar region and increased again in the second molar region, with the thinnest area at the first molar region and the thickest at the second premolar region. The canine to premolar region seems to be the most appropriate donor site that contains a uniformly thick mucosa. CT can be considered an alternative method for the measurement of palatal soft tissue thickness.     

Recognition and phagocytosis of multiple periodontopathogenic bacteria by anti-Porphyromonas gingivalis heat-shock protein 60 antisera

The present study has been performed to evaluate Porphyromonas gingivalis heat shock protein (HSP) 60 as a candidate vaccine to protect against multiple putative periodontopathic bacteria. Mouse anti-P. gingivalis HSP antisera demonstrated the elevated IgG antibody titers against the multiple bacteria tested and cross-reacted with heat-induced bacterial proteins of the target bacteria. The antisera also demonstrated a significantly higher opsonophagocytosis function against all the target bacteria than the control sera (P<0.01). We concluded that P. gingivalis HSP 60 could potentially be developed as a vaccine against multiple periodontopathic bacteria.     

Gingival fluid IL-1 and IL-6 levels in refractory periodontitis

Abstract Selected gingival bacteria and cytokine profiles associated with patients who did not respond to conventional periodontal therapy (refractory) were evaluated. 10 subjects with a high incidence of post-active treatment clinical attachment loss (>2% sites/year lost ≥ 3 mm) were compared to 10 age-, race-, and supragingival plaque-matched patients with low post-treatment clinical attachment loss (<0.5% sites/year) relative to the following parameters at 2 sites/patient with the deepest probing depths: (1) presence of 3 selected periodontal pathogens (Actinobacillus antinomycetemcomitans, Porphyromonas gingivalis. Eikenella corrodens) in subgingival plaque as determined by selective culturing, and (2) gingival crevicular fluid (GCF) levels of 3 cytokines associated with bone resorption (IL-1 alpha, IL-1 beta, IL-6) as determined by two-site ELISA. Results indicated no significant differences in any clinical measurement (except incidence of clinical attachment loss), in the presence of any bacterial pathogen, or in GCF cytokine levels between refractory subject sites versus stable subject sites. However, when sites producing the greatest total GCF cytokine/patient were compared, sites from refractory patients produced significantly more IL-6 (30.1 ± 4.0 versus 15.4 ± 2.8 nM, p<0.01). The subgingival presence of each of the 3 bacterial pathogens was associated with elevated GCF IL-1 concentrations. These data suggest that gingival IL-1 and IL-6 production is different in response to local and systemic factors associated with periodontitis, and that IL-6 may play a role in the identification and mechanisms of refractory periodontitis.     

Predictors of initial stability of orthodontic miniscrew implants

The purpose of this retrospective study was to elucidate potential confounding factors affecting initial stability of miniscrews inserted to enhance orthodontic anchorage. Four hundred and seven miniscrews inserted in 168 patients treated by 17 orthodontic residents were analysed in a consecutive chart review. The outcome variable was the stability of the miniscrew, measured as a dichotomous variable, 0 if the miniscrew loosened during a 1 week period after insertion to the time of orthodontic force application and a value of 1 otherwise. Potential confounding variables examined were gender, age, jaw, insertion site, tissue type, length and diameter of the miniscrew, and number of previous insertions. Generalized estimating equations (GEE) methods were used to estimate the influence of each factor on stability for the correlated binary outcomes of each patient. A weighted analysis for the GEE approach was also performed for the convergence calculation of the estimation procedure due to a value of 0 in one of the cells. Crude odds ratio (cOR) and adjusted odds ratio (aOR) and their 95 per cent confidence intervals (CI) were calculated for this purpose. The overall success rate after 1 week was 93.1 per cent (379/407). The screws inserted by more experienced clinicians (more than 20 miniscrews) were found to have approximately a 3.6-fold higher success rate of initial stability compared with those inserted by less experienced clinicians after adjusting for the insertion site (aOR = 3.63, P = 0.015). The results of the present study suggest that the initial stability depends on insertion site and clinician experience.