Color Stability of Dry Earth Pigmented Maxillofacial Silicone A-2186 Subjected to Microwave Energy Exposure

PURPOSE: The purpose of this study was to measure spectrophotometrically the color stability of pigmented A-2186 silicone maxillofacial elastomer with 10% by volume of titanium white dry earth opacifier before and after exposure to microwave energy over a simulated 1.5-year period of microwave sterilization. Materials AND METHODS: A-2186 silicone elastomer opacified with titanium white dry earth pigment, pigmented with 5 cosmetic dry earth pigment colors [no pigment (control) group (Pc), red (Pr), yellow ochre (Py), burnt sienna (Po), and a mixture of Pr + Py + Po color group (P3)], was used in this study. Each of the 5 experimental groups consisted of 5 specimens. All specimens were placed in a 250 ml glass beaker filled with 150 ml of water (replenished for each microwave exposure). An exposure of 6 minutes was used 18 times (simulating 1.5 years of microwave sterilization with one 6 minute exposure monthly). Reflectance values were measured by spectrophotometer. Three- and two-way analyses of variance with repeated measures were performed for the color difference (DeltaE*) with the factors of group/color/months, and group/months, respectively. Means were compared by Tukey Honest Significant Difference (HSD) multiple range test calculated at the 0.05 level of significance using SPSS. RESULTS: The trained human eye can detect color changes (DeltaE*) greater than 1.0. Most DeltaE* values of the red pigment group at all intervals and the mixed pigment group at 15- and 18- month intervals increased significantly greater than 1.0 (p < 0.001) compared with the control group. Yellow and burnt sienna groups remained the most color stable over time with DeltaE* values below 0.35. CONCLUSIONS: Lack of color stability of red dry earth pigmented A-2186 silicone maxillofacial elastomers was clinically significant after 12-month exposure to microwave energy as compared with yellow, burnt sienna, and opacified A-2186 dry earth pigments.     

Effect of short-term erythropoietin therapy in anemic premature infants.

OBJECTIVE: To determine the effectiveness of a 10-day subcutaneous erythropoietin (rHuEpo) course of 300 units per kg per dose plus oral iron compared to oral iron alone in anemic infants during their convalescent phase of illness. STUDY DESIGN: Prospective, randomized trial performed at a 40-bed, teaching, referral, level III, neonatal intensive care unit. Infants with a gestational age at birth of less than 32 weeks, hematocrit of less than or equal to 28% with a corrected reticulocyte count of less than or equal to 5%, postconceptual age of less than 48 weeks or 5 months chronological age, and a diagnosis of anemia of prematurity were considered for inclusion. Major outcome parameters included hematocrit, corrected reticulocyte count and red cell transfusion requirements. RESULTS: A total of 60 infants were enrolled (n=30 per group). Infants randomized to rHuEpo had a significantly higher post-treatment hematocrit and corrected reticulocyte count than infants in the iron only group (p<0.001). There was a trend towards fewer red cell requirements in the rHuEpo group. CONCLUSIONS: The rHuEpo regimen studied here was associated with an acute improvement in hematocrit and corrected reticulocyte counts. This study did not demonstrate a statistically significant decrease in transfusion therapy, in part related to increased subsequent use of rHuEpo in the control group. Taken together, these data demonstrate that this regimen can effectively treat anemia in convalescent premature infants.     

Influence on binding of third-order torque to second-order angulation

Using an earlier model, which described the critical contact angle for binding from second-order angulation alone, a more generalized model is derived that combines the effects of angulation and torque. From this vantage point, the onset of binding is evaluated for 3 scenarios: second-order angulation alone, third-order torque only, and a combination of second-order angulation and third-order torque. These scenarios are detailed by plotting the critical contact angle for binding against the torque angle as a function of 10 wire dimensions (16 x 16, 16 x 22, 17 x 17, 17 x 22, 17 x 25, 18 x 18, 18 x 22, 18 x 25, 19 x 25, and 21 x 25 mil), 4 bracket widths (70, 100, 130, and 160 mil), and 4 bracket slots (18, 20.5, 22, and 24.5 mil). From these plots, we learn that each wire base dimension (eg, an 18-mil base as found in 18 x 18-mil, 18 x 22-mil and 18 x 25-mil archwires) has a common maximum critical contact angle for binding. Moreover, each wire-slot combination has a common maximum torque angle, which is independent of bracket width. Finally, we learn that archwire-bracket combinations that use a metric 0.5-mm slot might have some advantages with regard to torquing--given the current philosophy that light, continuous forces are more favorable.