Uptake and biotransformation of sevof lurane in humans: A comparative study of sevof lurane with halothane, enflurane, and isoflurane

Study Objective: To compare the volatile anesthetic sevoflurane with halothane, enfurane, and isof urane on the uptake and biotransformation in humans.

Design: Prospective pharmacokinetic study of sevofurane administration in human subjects.

Setting: Inpatient surgery clinic at a university medical center.

Patients: Thirty-two Japanese patients, free of systemic diseases, undergoing minor elective surgery with endotracheal general anesthesia.

Interventions: The patients were assigned randomly to one of four groups: halothane, enflurane, isofurane, or sevofurane. One of the four volatile anesthetics being investigated [equivalent to 1.1 minimum alveolar concentration (MAC): halothane, 0.85%; enfurane, 1.85%; isofurane, 1.27%; and sevofurane, 1.88%; in inspired concentrations throughout the first hour of anesthesia] was administered for 60 minutes.

Measurements and Main Results: In all patients, serum and urinary fluoride concentrations were measured. The concentrations of all gases were measured separately with a mass spectrometer. The cumulative uptake of each anesthetic agent during a certain period was calculated as an integration of the uptake rate per minute. The results for one-hour inhalation of sevofurane (1.1 MAC) showed an uptake (corrected for body surface area and MAC) of 490 ml/m²/MAC and estimated degradation rate of 3.3%. For purposes of comparison, similar studies of halothane (uptake, 653 ml/m²/MAC; degradation rate 15.7%), enfurane (1150 ml/m²/MAC; 1.3%), and isofurane (439 ml/m²/MAC; 0.6%) were also conducted. Sevofurane had a peak serum inorganic fluoride concentration of 19.3 μmol/L, and no abnormality in hepatic or renal functions was observed in any of the subjects during the two weeks postoperatively.

Conclusions: Accurate determinations of uptake and degradation rate for sevoflurane and three other volatile anesthetics in Japanese patients were obtained. These findings have established that, despite its relatively large MAC *1.71%), sevoflurane has a small uptake due to its low solubility. However, the degradation rade was shown to be as high as 3.3%, resulting in a higher serum fluoride concentration than seen after administration of isoflurane, halothane, and (possibly) enflurane.     

Efficacy of Intraoperative Cooling Methods

Background: Patients may require perioperative cooling for a variety of reasons including treatment of a malignant hyperthermia crisis and induction of therapeutic hypothermia for neurosurgery. The authors compared heat transfer and core cooling rates with five cooling methods.

Methods: Six healthy volunteers were anesthetized with desflurane and nitrous oxide. The cooling methods were 1) circulating water (5 [degree sign] Celsius, full-length mattress and cover), 2) forced air (10 [degree sign] Celsius, full-length cover), 3) gastric lavage (500 ml iced water every 10 min), 4) bladder lavage (300 ml iced Ringer's solution every 10 min), and 5) ice-water immersion. Each method was applied for 40 min or until the volunteers' core temperatures approached 34 [degree sign] Celsius. The volunteers were rewarmed to normothermia between treatments. Core cooling rates were evaluated using linear regression.

Results: The first volunteer developed abdominal cramping and diarrhea after gastric lavage. Consequently, the technique was not again attempted. Bladder lavage increased heat loss 10 [nearly =] 10 W and decreased core temperature 0.8 +/- 0.3 [degree sign] Celsius/h (r2 = 0.99 +/- 0.002; means +/- SD). Forced-air and circulating-water cooling comparably increased heat flux, [nearly =] 170 W. Consequently, core cooling rates were similar during the two treatments at 1.7 +/- 0.5 [degree sign] Celsius/h (r2 = 0.99 +/- 0.001) and 1.6 +/- 1.1 [degree sign] Celsius/h (r2 = 0.98 +/- 0.02), respectively. Immersion in an ice water slurry increased heat loss [nearly =] 600-800 W and decreased core temperature 9.7 +/- 4.4 [degree sign] Celsius/h (r sup 2 = 0.98 +/- 0.01). Immersion cooling was associated with an afterdrop of [nearly =] 2 [degree sign] Celsius.     

Regeneration of periodontal ligament and cementum by BMP-applied tissue engineering

Previously, we demonstrated that the inductive properties of bone morphogenetic protein (BMP) highly depend on the nature of the carrier material used for implantation. In this paper, we show that administration of BMP incorporated in a fibrous collagen membrane can help to regenerate periodontal ligament and cementum both in cat canines and in monkey molars. The partially purified bovine BMP was combined with one or two layers of a fibrous collagen membrane. Although the single layer approach showed partial regeneration of periodontal defects, it also quite often led to ankylosis. The double layer technique in artificially prepared class III furcation defects in monkey molars gave favorable results. After 12 wk, not only the alveolar process but also the periodontal ligament and cementum had regenerated along the entire treated dentin surface. Collagen fibers were arranged more or less perpendicular to the surface of the new cementum. Ankylosis was not seen. It is concluded that the double-layer approach is superior to the single-layer technique in regenerating cementum.     

Two cases of Trichosporon beigelii pneumonia in immunocompromised hosts

Two cases of Trichosporon beigelli pneumonia in severely immunocompromised patients are reported. At autopsy, Trichosporon beigelii was detected in all lobes in one patient who had a small cell lung cancer. Polymycotic infection involving Trichosporon beigelii and Aspergillus was proved in the other patient who had a non-Hodgkin's lymphoma. Miconazole therapy was not effective against Trichosporon beigelii infection in both cases. Although diagnosis and management are difficult, Trichosporon beigelii must be considered as a cause of visceral opportunistic fungal infection.     

Equivalent current dipole estimated from SSR potential distribution over the human hand. Sympathetic skin response.

OBJECTIVE: We aimed to determine whether or not the potential distribution of the sympathetic skin response (SSR) on the palm and dorsum of the hand can be described by an equivalent current dipole (ECD) as an SSR source model. METHODS: The SSR of 22 normal subjects were simultaneously obtained from two electrodes placed on the palm and the dorsum of hand, with an indifferent electrode on the thumbnail. We then measured the SSR potential distribution in 10 of the 20 subjects who had responded to stimulation with a clear dorsal SSR. To do this, 18 electrodes were attached to the palm and dorsum of the hand. SSR-evoking stimulation (sound, voice and rapid inspiration) were randomly delivered to the subject at time intervals of more than 1min to minimize the habituation effect. We estimated the ECD from the measured potential distribution. RESULTS AND CONCLUSIONS: The SSR-evoked by stimulation was negative in potential at the palmar sites of all 22 subjects, and was positive in potential at the dorsal sites of the hand in 20 of the 22 subjects. The SSR potential distribution, which was measured in 10 subjects, reached its maximum negative and positive potential near the base of the middle finger on the palm, and near the corresponding site on the dorsum of the hand, respectively. The SSR potential measured on the dorsum of the hand, however, was about 1/3 in amplitude of those on the palmar sites. These results suggest that the SSR source is located on the palm (probably the sweat glands) as confirmed by the estimated ECD (a negative pole on the palm and a positive pole on the dorsum of the hand). We speculate that the SSR may result from the potential difference caused by the Na(+) concentration gradient in the sweat, which results from intracanal reabsorption of Na(+). SIGNIFICANCE: The ECD resulting from the Na(+) concentration gradient within the canal of sweat glands is thought to be the source of the SSR from the negative pole on the palm to the positive pole on the dorsum.     

A Comparison of Two Simple Measures to Evaluate the Health Status of Asthmatics: The Asthma Bother Profile and the Airways Questionnaire 20

Simple and concise measures for health status are desirable in clinical practice. The Asthma Bother Profile (ABP), which consists of 23 items, has been developed to assess how much asthma bothers patients. The Airways Questionnaire 20 (AQ20) is a simple instrument which consists of 20 items. The purpose of this study was to investigate how the ABP and AQ20 evaluate the health status of patients with asthma. A total of 166 patients with chronic asthma (age: 48 ± 16 yr, 77 males) completed pulmonary function testing, measurement of airway hyperresponsiveness, dyspnea rating, assessments of their anxiety and depression (HADS; Hospital Anxiety and Depression Scale), and assessments of their health status. The health status was assessed using the ABP, AQ20, the short-form 36 health survey questionnaire (SF-36), the Living With Asthma Questionnaire (LWAQ) and the Asthma Quality of Life Questionnaire (AQLQ). The Japanese version of the ABP included only 15 'bother' items out of the original 23 items due to cultural differences. The scores on the ABP were widely distributed, whereas the scores on the AQ20 were skewed towards the milder end of the scale. The ABP had a strong correlation with the Avoidance and Distress constructs on the LWAQ, and Anxiety and Depression on the HADS (Rs = 0.56 ∼ 0.79), and its strongest correlation with the General Health (Rs = - 0.64) scale among the 8 subscales on the SF-36. The AQ20 had a less significant correlation with the LWAQ, AQLQ, and SF-36 than the ABP. The ABP and AQ20 were short and simple to complete, and both measures could easily be used in clinical practice. The ABP can evaluate patients more specifically with respect to distress and bother than the AQ20.