Alemtuzumab (CAMPATH 1H) Induction Therapy in Cadaveric Kidney Transplantation—Efficacy and Safety at Five Years

Alemtuzumab is a powerful lymphocyte depleting antibody currently being evaluated in solid organ transplantation. This paper describes 5-year results of a single center study of alemtuzumab as induction in renal transplantation. Thirty-three renal transplant recipients received 20 mg alemtuzumab on day 0 and 1, followed by half-dose cyclosporin monotherapy (trough concentration 75-125 ng/mL) from day 3. They were compared in a retrospective contemporaneous-controlled manner with 66 kidney transplant recipients transplanted in the same period and center who received conventional immunosuppression with cyclosporin, azathioprine and prednisolone. In the alemtuzumab group 12% of recipients died compared to 17% in the control group (p = 0.48); likewise graft loss was similar in both groups (21% vs. 26%, respectively, p = 0.58). Incidence of acute rejection was also comparable at 5 years (31.5% vs. 33.6%), although the pattern of rejection was different with 14% patients in the alemtuzumab group experiencing rejection over 1 year post-transplant compared to none in the control group. There was no significant difference between groups in terms of infection or serious adverse events. While acknowledging the limitations of a relatively small single-center study, results suggest that alemtuzumab induction allowed satisfactory long-term patient and graft survival equivalent to that seen with standard triple immunosuppression, while avoiding steroid therapy.     

Perceptions and attitudes of Canadian orthodontists regarding digital and electronic technology.

INTRODUCTION: To plan for future acceptance and implementation of computer-related technology, it is necessary to understand orthodontists' current perceptions and attitudes toward emerging technologies. METHODS: An anonymous, self-administered, mail-out survey of Canadian orthodontists was conducted. The response rate was 45.6% (304/667). RESULTS: Most orthodontists indicated that computer technology could improve current practice efficiency and quality of patient care. Only 15% reported that digital models are quite or very useful; 73.6%, 69.1%, 55%, and 37.4% agreed or strongly agreed with using digital and electronic technology to consult with other dental specialists, other orthodontists, general dentists, and the public, respectively. Cost of the technology was reported as a significant or insurmountable obstacle by 54% of the respondents. Interprovincial legislation, unclear consultation remuneration guidelines, and lack of comfort with the technology were not perceived as significant obstacles. Only 36% reported security or privacy issues as a significant or insurmountable obstacle. CONCLUSIONS: Canadian orthodontists seem to view digital and electronic technology as useful and capable of improving their offices' efficiency and production. Although they are sensitive to some potential obstacles, they are willing to overcome these and incorporate the technology into their practices.     

C-reactive protein as a predictor of fetal and maternal infective morbidity and fetal mortality

The value of maternal C-reactive protein (CRP) levels as predictors of fetal and maternal infective morbidity and fetal mortality was assessed prospectively over a 6-month period in all cases of premature rupture of the fetal membranes or suspected premature labour. Statistical analysis of results showed that CRP at a level of 1.32 mg/dl is a sensitive marker of infective morbidity in mother and neonate. Furthermore, there was a significant association between raised CRP levels and low-birth-weight babies, suggesting that intra-uterine infection is a major cause of prematurity in the study population.     

Activation of 5-HT3 receptor by 1-phenylbiguanide increases dopamine release in the rat nucleus accumbens

The serotonin-3 (5-HT₃) agonist 1-phenylbuguanide (0.1–1.0 mM in perfusate) caused a robust, dose-dependent enhancement of extracellular dopamine content in nucleus accumbens as measured by in vivo microdialysis. This action was antagonized by co-perfusion of the 5-HT₃ antagonists zacopride and GR38032F (1 mM in perfusate). Similar effects were observed in 5-HT-denervated rats. These findings suggest that there is a potent modulation of dopamine (DA) release in the nucleus accumbens mediated via 5-HT₃ receptors, which appear to be located presynaptically on DA terminals of the mesolimbic DA pathway.     

恒定分压CO2对羟基磷灰石溶解度的影响

[目的]应用固体滴定技术监测羟基磷灰石(Hydroxyaptite,HA)的溶解平衡过程,观察组织液生理浓度CO2对羟基磷灰石溶解度的影响.[方法]在恒温水浴系统中以HA为固体滴定物.测试液为KCl溶液(0.1 mol/L),并引入恒定分压的CO2(占空气体积比为3.5%±0.1%).半导体二极管激光为发射光源,散射光源探测器用于监测HA的溶解平衡过程并判断超越溶解平衡点所出现的沉淀(合共17次滴定终点).固体滴定总量用于代表溶解度等温线上的数据点.[结果]引入恒定分压CO2后测定的HA在KCl溶液中的溶解度高于其在KCl溶液中所得50倍以上.[结论]固体滴定技术利于监测HA的溶解平衡过程.溶液体系中CO2增加HA的溶解度.推测该现象与CO2-3形成的复合物密切相关.     

Noninvasive tests for arterial structure, function, and compliance: do they identify risk or diagnose disease?

BACKGROUND: Brachial artery reactivity (BAR), carotid intima-media thickness (IMT), and applanation tonometry for evaluation of total arterial compliance may provide information about preclinical vascular disease. We sought to determine whether these tests could be used to identify patients with coronary artery disease (CAD) without being influenced by their ability to identify those at risk for CAD developing. METHODS: We studied 100 patients and compared 3 groups: 35 patients with known CAD; 34 patients with symptoms and risk factors but no CAD identified by stress echocardiography (risk group); and 31 control subjects. BAR and IMT were measured using standard methods, and total arterial compliance was calculated by the pulse-pressure method from simultaneous radial applanation tonometry and pulsed wave Doppler of the left ventricular outflow. Ischemia was identified as a new or worsening wall-motion abnormality induced by stress. RESULTS: In a comparison between the control subjects and patients either at risk for developing CAD or with CAD, the predictors of risk for CAD were: age (P =.01); smoking history (P =.002); hypercholesterolemia (P =.002); and hypertension (P =.004) (model R = 0.82; P =.0001). The independent predictors of CAD were: IMT (P =.001); BAR (P =.04); sex (P =.005); and hypertension (P =.005) (model R = 0.80; P =.0001). CONCLUSION: IMT, BAR, and traditional cardiovascular risk factors appear to identify patients at risk for CAD developing. However, only IMT was significantly different between patients at risk for developing CAD and those with overt CAD.     

Screw angulation affects bone-screw stresses and bone graft load sharing in anterior cervical corpectomy fusion with a rigid screw-plate construct: a finite element model study

Background contextAnterior corpectomy and reconstruction with bone graft and a rigid screw-plate construct is an established procedure for treatment of cervical neural compression. Despite its reliability in relieving symptoms, there is a high rate of construct failure, especially in multilevel cases.PurposeThere has been no study evaluating the biomechanical effects of screw angulation on construct stability; this study investigates the C4–C7 construct stability and load-sharing properties among varying screw angulations in a rigid plate-screw construct.Study designA finite element model of a two-level cervical corpectomy with static anterior cervical plate.MethodsA three-dimensional finite element (FE) model of an intact C3–T1 segment was developed and validated. From this intact model, a fusion model (two-level [C5, C6] anterior corpectomy) was developed and validated. After corpectomy, allograft interbody fusion with a rigid anterior screw-plate construct was created from C4 to C7. Five additional FE models were developed from the fusion model corresponding to five different combinations of screw angulations within the vertebral bodies (C4, C7): (0°, 0°), (5°, 5°), (10°, 10°), (15°, 15°), and (15°, 0°). The fifth fusion model was termed as a hybrid fusion model.ResultsThe stability of a two-level corpectomy reconstruction is not dependent on the position of the screws. Despite the locked screw-plate interface, some degree of load sharing is transmitted to the graft. The load seen by the graft and the shear stress at the bone-screw junction is dependent on the angle of the screws with respect to the end plate. Higher stresses are seen at more divergent angles, particularly at the lower level of the construct.ConclusionThis study suggests that screw divergence from the end plates not only increases load transmission to the graft but also predisposes the screws to higher shear forces after corpectomy reconstruction. In particular, the inferior screw demonstrated larger stress than the upper-level screws. In the proposed hybrid fusion model, lower stresses on the bone graft, end plates, and bone-screw interface were recorded, inferring lower construct failure (end-plate fractures and screw pullout) potential at the inferior construct end.