Intra-aneurysm pressure measurements in successfully excluded abdominal aortic aneurysm after endovascular repair

PURPOSE: This study was performed to determine intra-aneurysm sac pressure of abdominal aortic aneurysm after endovascular aneurysm repair in patients considered successfully treated with aneurysm shrinkage and absence of endovascular leakage. METHODS: In 10 patients with median aneurysm shrinkage of 12 mm (range, 7 to 22 mm) and median follow-up of 19 months (range, 14-43 months), a percutaneous translumbar intra-aneurysm pressure measurement was made with a 0.014-inch guide wire-mounted pressure sensor and compared with intra-aortic pressure. RESULTS: Median intra-aneurysm systolic/diastolic/mean pressure was 19/18/19 (range, 17-35/13-33/17-31) compared with median intra-aortic pressure of 135/75/99 (range, 126-199/60-95/84-129). Mean intra-aneurysm pressure was 20% of mean intra-aortic pressure (range, 13%-33%). Pulsatility was negligible. CONCLUSION: Successful endovascular aneurysm repair of abdominal aortic aneurysm results in considerable pressure reduction in the aneurysm sac. The ability to monitor intra-aneurysm pressure provides hemodynamic information within the sac, which can be used in conjunction with imaging to determine whether a secondary intervention is warranted.     

Gastric Emptying of Solids and Semi-solids in Morbidly Obese and Non-obese Subjects: An Assessment Using the <Superscript>13</Superscript>C-Octanoic Acid and <Superscript>13</Superscript>C-Acetic Acid Breath Tests

Background It has been suggested that obesity is associated with an altered rate of gastric emptying. The objective of the present study was to determine whether the rates of solid and semi-solid gastric emptying differ between morbidly obese patients and lean subjects. Methods The Gastric-emptying time (GET) of solid and semi-solid meals were compared between lean healthy subjects and morbidly obese patients enrolled in two previously published studies. GET of solid and semi-solid meals was measured using the ¹³C-octanoic acid breath test and ¹³C-acetic acid breath test, respectively, in 24 lean and 14 morbidly obese individuals of both sexes. Student t-test was used to compare the mean data between the lean and morbidly obese groups. The influence of sex, gender, BMI and morbid obesity on the GET of solid meals was verified by linear regression analysis. Results Mean t(1/2) values of solid GET (± standard deviation) were 203.6 ±  76.0 min and 143.5 ± 19.1 min for lean and obese subjects, respectively (P = 0.0010). Mean t(lag) values of solid GET were 127.3 ± 42.7 min and 98.4 ± 13.0 min for lean and obese subjects, respectively (P = 0.0044). No significant difference in semi-solid GET was observed between the lean and morbidly obese groups. Conclusion The present study demonstrated a significantly enhanced gastric emptying of the solid meal test in morbidly obese patients when compared to lean subjects. This finding is compatible with the hypothesis that rapid gastric emptying in morbidly obese subjects increases caloric intake due to a more rapid loss of satiety.     

Less invasive percutaneous wave plating of simple femur shaft fractures: A prospective series

In developing nations, fixation of femoral shaft fractures with intramedullary (IM) nails can pose significant challenges. Use of IM implants is commonly limited by availability, funds or patient's physique. Conversely, traditional compression plates are usually readily available at a much lower cost, making bridge plating of femur fractures a frequently used surgical technique. We hypothesised that less invasive percutaneous plate osteosynthesis (MIPPO) of femoral shaft fractures has a similar outcome compared to IM nailing.The study is designed as a prospective case series at a Level 1 university trauma centre. Fifty-seven patients with simple femur shaft fractures (Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association (AO/OTA) type A) were enrolled between April 2001 and December 2005 and followed up for a minimum of 1 year or until fracture union. Primary outcome measures included union rate and time to union. Secondary outcome parameters were hardware failure, malalignment, infection and need for revision surgery.The mean age of the study cohort was 24.7 years. Fifty-four patients sustained associated systems injury. Primary union occurred in 54 patients in an average time of 13 weeks. Two patients presented with implant failure, and one patient displayed signs of delayed union. Six patients developed valgus deformities, whereas five patients displayed external rotation malalignment. One patient developed a superficial wound infection, and another presented with a deep infection.Bridge wave plating represents a safe and efficacious treatment alternative to IM nailing for simple femoral shaft fractures in countries where IM nails are limited by availability, costs and patient's physical characteristics.     

Reconstruction of parietal bone defects with adiposederived mesenchymal stem cells. Experimental study

Purpose:This study assessed the regeneration potential of mesenchymal stem cells (MSC) from adipose tissue associated with platelet-rich plasma (PRP) in bone regeneration.Methods:Thirty Wistar rats (Rattus norvegicus albinos) were divided into five groups (according to the grafting material and time to euthanasia): (1) autograft - 14 days (control), (2) autograft - 28 days (control), (3) MSC + PRP - 14 days, (4) MSC + PRP + papaverine - 14 days and (5) MSC + PRP + papaverine - 28 days. After euthanasia, the graft was removed and histological slides were prepared. They were assessed by a blinded pathologist using a previously published histological scale as parameter.Results:There was some degree of neoformed bone trabeculae (NBT) in 93.3% of the samples, as well as osteoblastic activity (OA). The autograft groups (14 and 28 days) had higher levels in the formation of bone trabeculae. Nonparametric data were analyzed using the Wilcoxon-Mann-Whitney test and proved not to be statistically significant at p < 0.05.Conclusions:Experimental parietal bone reconstruction, combining MSC, PRP and papaverine presented regeneration in all groups with no significant difference among them.Key words: Bone Regeneration, Platelet-Rich Plasma, Tissue Engineering, Rats     

Oral bone loss induced by mineral deficiency in a rat model: Effect of a synthetic bone mineral (SBM) preparation

Osteoporosis affects the craniofacial and oral structures and has been associated with periodontal bone loss, tooth loss and reduced jaw bone mass.ObjectiveThis study aimed to test the therapeutic efficacy of synthetic bone mineral (SBM) in minimizing alveolar bone loss induced by mineral deficiency in a rat model. SBM consists of a calcium carbonate apatite (similar to bone apatite) matrix incorporating magnesium, zinc, and fluoride ions.DesignThirty female Sprague Dawley rats (2 months old) were randomly distributed into 3 groups (10 rats per group): GA (control), on basic diet; GB, on mineral deficient (MD) diet; and GC, on MD + SBM. The rats were sacrificed after 3 months, the jawbones were isolated and the soft tissues removed. Bone density was determined using X-ray radiography (Faxitron); mandibular cortical width, panoramic mandibular index, and alveolar resorption degree (M/M ratio) using BioquantOsteo; and bone micro-architecture micro-computed tomography and scanning electron microscopy.ResultsCompared to control (GA), the rats on MD diet (GB) experienced significant mandibular bone loss while the rats on MD + SBM diet (GC) experienced significantly less bone loss compared to the GB group.ConclusionSBM, administered orally, may have the potential as an osteoporosis therapeutic agent in minimizing or preventing alveolar bone loss induced by mineral deficiency.     

Ultrastructural evaluation of the hybrid layer after cementation of fiber posts using adhesive systems with different curing modes

This in vitro study evaluated the adhesive interface of intraradicular fiber glass posts and root dentin using scanning electron microscopy (SEM). Forty-eight single-rooted premolars were randomly divided into 6 groups consisting of chemical, dual, or light cured adhesive systems combined with either chemical or dual cure resin cements. Scanning electron microscopic analysis showed the best results for continuity, density and morphology of the hybrid layer and resin tags for the combination of a self-cure adhesive with self-cure cement resin, followed by a dual-cure adhesive with self-cure cement resin, and finally a light-cure adhesive with self-cure cement. For the dual-cure resin cement, the same relation may be observed. The apical third was the most critical region for evaluated the criteria for all combinations of materials (Kruskal-Wallis and Friedman tests; p<0.001). Generally, the simplification of steps in the adhesive system and the polymerization reaction of resin adhesives and cements produced a direct effect on the quality of the adhesive post/dentin substrate interface.     

Case for diagnosis

The chondroid syringoma is a rare benign tumor, also called mixed cutaneous tumor by the presence of epithelial and mesenchymal components, consisting of sweat elements in cartilaginous, collagenous, myxoid or osseous stroma, among others. It mainly affects middle-aged men and is characterized by asymptomatic and slowgrowing, dermal or subcutaneous nodules. The most common locations are the head and neck. It is rare on the extremities. There are reports of malignant variants predominantly in women, located on the extremities. We report a case of a female patient with a lesion on the toe, with excellent outcome after surgical treatment.     

Longer Times of Receipt of Adjuvant Endocrine Therapy Correspond to Improved Functional Capacity and Lower Adiposity in Women Receiving Adjuvant Therapy

Purpose

To study the use of functional capacity (FC) level and duration of aromatase inhibitor (AI) therapy with adiposity parameters in women with breast cancer.