Color stability and hardness in dental composites after accelerated aging.

OBJECTIVES: To investigate the color and microhardness changes of five chemically- and five light-curing composites as a function of accelerated aging from light exposure. MATERIALS AND METHODS: From each material five composite specimens were embedded in epoxy resin prior to determining the Knoop microhardness of the surface. For analyzing the color DeltaE*=f((L*a*b*)) with a spectrophotometer, three discs per composite were prepared. After measuring the baseline for hardness and color the same specimens were exposed to a xenon arc light and water in a Weather-Ometer machine for a total radiant energy of 150 kJ/m2 and 122 h. The microhardness and the color were again determined following the aging treatment. RESULTS: Each material showed a significant increase in hardness after aging treatment (p<0.05). Comparing the hardness changes (in %) of the light-cured materials with the chemically cured materials, no significant difference could be found. Perceptible color differences could be observed for all the materials. Three brands showed small differences with DeltaE*=1.6-2.2, while four composites had DeltaE* ranging from 6.2 to 15.5. A significant correlation between hardness values and color changes could not be established. CLINICAL SIGNIFICANCE: The findings suggest that, since light-curable materials showed significantly more resistance to color changes after accelerated aging by light and water than chemically-cured materials, they may be more esthetically acceptable. Color changes were not correlated with surface hardness changes of the materials after aging.     

Relationships between clinical attachment level and spine and hip bone mineral density: data from healthy postmenopausal women

BACKGROUND: There are physiological reasons to expect an association between bone mineral density of the spine and hip and attachment loss. To this point, however, most studies have found no correlation. METHODS: The 135 patients in this report were part of a randomized controlled trial of estrogen replacement. All patients were in good oral health at entry and received annual oral prophylaxis as part of the study. Standard probing measurements were made with a pressure sensitive probe at 6 sites on each tooth. Bone mineral density was measured with dual-energy x-ray absorbtiometry at the lumbar spine (anterior-posterior and lateral) and proximal femur (neck, trochanter, intertrochanter, Ward's triangle, and total area). These procedures were performed at baseline and at annual intervals for 3 years. RESULTS: Correlations between cross-sectional measurements of clinical attachment level and bone mineral density were very weak, and did not approach statistical significance (-0.06 < or =r < or =0.10, 0.15 < or =P < or =0.75). A few somewhat stronger correlations were found between longitudinal changes in bone mineral density and attachment (-0.20 < or = r < or =-0.02, 0.02 < or = P < or =0.81). Although the correlations in the longitudinal changes were weak, they were consistently in the direction of greater bone mineral density being associated with less attachment loss. CONCLUSIONS: There is no clear association between clinical attachment level and bone mineral density of the lumbar spine and proximal femur, whether examined on a cross-sectional or longitudinal basis. Patterns in the data suggest there may be a weak association in the longitudinal changes.     

Clinical evaluation of freeze-dried block allografts for alveolar ridge augmentation: a case series

Various grafting materials have been used in guided bone regeneration procedures to augment alveolar ridges deficient in horizontal or vertical dimensions or both. Autogenous block grafts from intraoral and extraoral sites have been used for ridge augmentation with encouraging results. However, the risk of vascular and neurologic injury at the donor site as well as postoperative patient morbidity have been reported following these surgical procedures. The use of a cancellous block allograft could be one alternative to avoid potential donor site complications. Five deficient alveolar ridges in three patients were each grafted with a freeze-dried cancellous block allograft and a resorbable barrier membrane. Ridge measurements taken at baseline, graft placement, and a 6-month reentry surgery demonstrated an increase in alveolar ridge width from 2 to 4 mm. These gains in ridge width compare favorably with other guided bone regeneration studies, suggesting that a freeze-dried cancellous block allograft in conjunction with a resorbable membrane may be an acceptable alternative to the autogenous block graft in the treatment of compromised alveolar ridge deficiencies.     

Transverse molar movements during growth

The purpose of this study was to evaluate changes in molar crown torque and intermolar arch width from the time of permanent first molar eruption to early adulthood. Molar crown torque and intermolar arch width were measured in 36 untreated subjects with Class I occlusion from the Iowa Facial Growth Study at approximate ages 7.5, 10.3, 12.9, 16.5, and 26.4 years. On average, the mandibular first and second molars uprighted buccally by 5.0 degrees and 7.5 degrees, respectively. Mandibular first and second molar intermolar width increased by 2.2 and 0.78 mm, respectively. On average, maxillary first and second molars uprighted lingually by 3.3 degrees and 5.9 degrees, respectively. Maxillary first and second intermolar width increased by 2.8 and 2.0 mm, respectively. Results of statistical analysis by the Wilcoxon signed rank test indicate that (1) maxillary molars erupt with buccal crown torque and upright with age, whereas mandibular molars erupt with lingual crown torque and upright with age (P <.01), and (2) molar crown torque changes are accompanied by concurrent increases in maxillary and mandibular intermolar width (P <.01).     

Microbial leakage evaluation of the continuous wave of condensation

Coronal leakage has been recognized as a cause of pulpal and periradicular disease. Although cleaning and shaping of the root canal system is considered paramount, obturation of the system is an important step in endodontic success. The purpose of this study was to evaluate coronal bacterial leakage in teeth obturated with the System B continuous wave of condensation technique, followed by an Obtura II backfill, versus teeth obturated using the lateral condensation technique. Sixty single-rooted bilaterally matched teeth were evaluated in this study. An anaerobic bacterial leakage model was used. Results indicate that microbial coronal leakage occurs more quickly using lateral condensation than with the System B continuous wave of condensation and Obtura II backfill. This difference was statistically significant (p < or = 0.05). However, there was no statistical difference between groups 1 and 2 in the numbers of teeth that demonstrated bacterial leakage at the end of the study.     

The effectiveness of auxiliary features on a tooth preparation with inadequate resistance form

STATEMENT OF PROBLEM: No study has evaluated the efficacy of auxiliary tooth preparation elements for crowns with originally reduced resistance form. PURPOSE: This study evaluated the effects of different auxiliary preparation features on the resistance form of crowns with reduced axial wall and total occlusal convergence. MATERIAL AND METHODS: An Ivorine tooth was prepared on a milling machine with 20-degree total occlusal convergence (TOC), 2.5 mm of occlusocervical dimension, and a shoulder finish line. This design lacked geometric resistance form. The crown preparation was subsequently modified to include mesiodistal grooves, mesiodistal boxes, buccolingual grooves, occlusal inclined planes, an occlusal isthmus, and reduced TOC in the axial wall from 20 to 8 degrees TOC in the cervical 1.5 mm of the axial wall. The grooves and boxes were placed into the tooth with the same 20-degree TOC as the initial axial walls. Ten standardized metal dies were used for each preparation design. Standardized complete metal crowns were fabricated for all specimens. The metal crowns were cemented on metal dies with resin-modified glass ionomer cement. A strain gauge was placed at the mid-lingual cervical area of each crown preparation margin. The resistance of each specimen was evaluated when force was applied at a 45-degree angulation to the long axis of the die in a lingual to buccal direction. The peak loads during crown dislodgment, as well as the tensile stress at the mid-lingual cervical area, were measured using a universal testing machine (Kgs) for each specimen. The control group consisted of 10 dies, with the original crown preparation having no geometric resistance form and no auxiliary preparation features. Strain gauges provided the force (Kgs) that resulted in electric currency disrupt at the crown/die interface, thus providing data regarding the force required for slight crown micromovement (2 microm). Data between control and experimental groups were compared using the Mann-Whitney U test (alpha=.05). RESULTS: Proximal grooves, proximal boxes, buccolingual grooves, occlusal inclined planes, and occlusal isthmuses were not effective at increasing a crown's resistance to dislodgement when the tooth preparation lacked resistance. The only crown modification that offered enhanced resistance form when compared with the control group was the reduced TOC in the cervical half of the axial wall. CONCLUSION: Within the limitations of this in vitro study the crown preparation modification that significantly enhanced the resistance form of a compromised tooth preparation was reducing the TOC at the cervical aspect of the axial wall. Placing auxiliary retentive features such as grooves and boxes into a compromised tooth preparation (2.5 mm occlusocervical dimension and 20-degree TOC) was not effective when these retentive features possessed the same 20-degree TOC as the prepared axial walls.     

Clinical complications with implants and implant prostheses

The purpose of this article is to identify the types of complications that have been reported in conjunction with endosseous root form implants and associated implant prostheses. A Medline and an extensive hand search were performed on English-language publications beginning in 1981. The searches focused on publications that contained clinical data regarding success/failure/complications. The complications were divided into the following 6 categories: surgical, implant loss, bone loss, peri-implant soft tissue, mechanical, and esthetic/phonetic. The raw data were combined from multiple studies and means calculated to identify trends noted in the incidences of complications. The most common implant complications (those with a greater than a 15% incidence) were loosening of the overdenture retentive mechanism (33%), implant loss in irradiated maxillae (25%), hemorrhage-related complications (24%), resin veneer fracture with fixed partial dentures (22%), implant loss with maxillary overdentures (21%), overdentures needing to be relined (19%), implant loss in type IV bone (16%), and overdenture clip/attachment fracture (16%). It was not possible to calculate an overall complications incidence for implant prostheses because there were not multiple clinical studies that simultaneously evaluated all or most of the categories of complications. Although the implant data had to be obtained from different studies, they do indicate a trend toward a greater incidence of complications with implant prostheses than single crowns, fixed partial dentures, all-ceramic crowns, resin-bonded prostheses, and posts and cores.     

Australian dentists' views on toothbrush wear and renewal

The purpose of this study was to survey the views of Australian dentists on toothbrush wear, toothbrush renewal periods and recommendations to patients and to investigate the relationship between dentists' views on patients' toothbrush renewal intervals and dentists' own renewal habits. Questionnaires were mailed to 5,596 Australian general dental practitioners and replies received from 3,406 (61 per cent response rate). The majority of respondents (85.7 per cent) felt patients should renew their toothbrushes more often. However, only 45.3 per cent usually made a recommendation to their patients as to when they should renew their toothbrush and only 41.7 per cent thought patients actually followed such recommendations. Most respondents (56.6 per cent) thought the average adult patient should renew a toothbrush every two-three months. A renewal period of one month or earlier was recommended by 23.8 per cent of dentists; four-five months by 8 per cent; and six months or longer by 11.5 per cent. A highly significant correlation was found between the renewal periods recommended for patients and the intervals selected by the dentists for their personal brushes (p < 0.001; chi-square test). Bending and splaying of bristles was the sign identified by the majority of dentists (70 per cent) as indicating the need for a new brush. The findings suggest dentists' recommendations concerning toothbrush renewal intervals may be based on their own toothbrush renewal habits. It is also concluded that dentists think patients comply poorly with their recommendations on toothbrush renewal.     

Effects of distance from the pulp and thickness on the hydraulic conductance of human radicular dentin

The purposes of this study were: (1) to measure the effect of distance from the pulp on the hydraulic conductance of human radicular dentin; (2) to determine the influence of dentin thickness on the rates of fluid flow; and (3) to attempt to correlate dentinal tubule densities and diameters with root dentin hydraulic conductance. Dentin slabs prepared from extracted, unerupted, human third molar teeth were placed in a split-chamber device to permit quantitation of fluid filtration rate (hydraulic conductance). In the SEM portion of the study, dentinal tubule numbers and diameters were recorded. The results indicated that radicular dentin hydraulic conductance decreased with distance from the pulp and with increasing dentin thickness. Tubule density and diameter correlated well with the measured hydraulic conductances. The relatively low hydraulic conductance of outer root dentin makes it a significant barrier to fluid movement across root structure.