Assessment of correlation between computerized tomography values of the bone, and maximum torque and resonance frequency values at dental implant placement

summary The aim of this study was to determine the bone density in the designated implant sites using computerized tomography (CT), the fastening torque values of dental implants, and the implant stability values using resonance frequency analysis. Further aim was to evaluate a possible correlation between bone density, fastening torque and implant stability. Eighty‐five patients were treated with 158 Brånemark System implants. CT machine was used for preoperative evaluation of the jawbone for each patient, and bone densities were recorded in Hounsfield units (HU). The fastening torque values of all implants were recorded with the OsseoCare equipment. Implant stability measurements were performed with the Osstell machine. The average bone density and fastening torque values were 751·4 ± 256 HU and 39·7 ± 7 Ncm for 158 implants. The average primary implant stability was 73·2 ± 6 ISQ for seventy implants. Strong correlations were observed between the bone density, fastening torque and implant stability values of Brånemark System TiUnite MKIII implants at implant placement (P < 0·001). These results strengthen the hypothesis that it may be possible to predict and quantify initial implant stability and bone quality from pre‐surgical CT diagnosis.     

Mutational analysis of candidate genes in 24 amelogenesis imperfecta families

Amelogenesis imperfecta (AI) is a heterogeneous group of inherited defects in dental enamel formation. The malformed enamel can be unusually thin, soft, rough and stained. The strict definition of AI includes only those cases where enamel defects occur in the absence of other symptoms. Currently, there are seven candidate genes for AI: amelogenin, enamelin, ameloblastin, tuftelin, distal-less homeobox 3, enamelysin, and kallikrein 4. To identify sequence variations in AI candidate genes in patients with isolated enamel defects, and to deduce the likely effect of each sequence variation on protein expression and structure, families with isolated enamel defects were recruited. The coding exons and nearby intron sequences were amplified for each of the AI candidate genes by using genomic DNA from the proband as template. The amplification products for the proband were sequenced. Then, other family members were tested to determine their genotype with respect to each sequence variation. All subjects received an oral examination, and intraoral photographs and dental radiographs were obtained. Out of 24 families with isolated enamel defects, only six disease-causing mutations were identified in the AI candidate genes. This finding suggests that many additional genes potentially contribute to the etiology of AI.     

Mechanical properties of visible light-cured resins reinforced with hydroxyapatite for dental restoration.

OBJECTIVES: The purpose of this study was to measure and analyze the mechanical properties of several composite materials designed for dental restoration. METHODS: The materials were composed of a visible light-curing monomer mixture (either Bis-GMA+TEGDMA or Bis-GMA+HEMA) as a matrix and hydroxyapatite (either microscopic or nanoscopic particles) as a reinforcing filler. The surface of the hydroxyapatite particles was modified by using a coupling agent (citric, malic, acrylic or methacrylic acid). Five specimens of 14 different composites were prepared for each mechanical test: flexural strength, Young's modulus and Vickers hardness. Mean values and standard deviations were calculated, and ANOVA and Student Newman Keuls multiple comparison tests were applied (P < 0.05). RESULTS: The addition of 50-60 wt% of hydroxyapatite particles to the unfilled monomer mixtures led to the increase of both Young's modulus and surface hardness of the material, while the flexural strength decreased. In general, when microscopic instead of nanoscopic hydroxyapatite was used as a reinforcing filler, mechanical properties were favored. The mechanical properties were also improved by adding citric, acrylic or methacrylic acid as a coupling agent. CONCLUSIONS: An adequate surface modification of the hydroxyapatite particles conferred enhanced mechanical properties to the final dental composite. Microscopic-hydroxyapatite particles are preferred to nanoscopic ones.     

Endodontic implications of the maxillary sinus: a review

The anatomical and clinical significance of the maxillary sinus in relation to conventional and surgical endodontic therapy is considered. The discussion includes a review on the development, anatomy and physiology of the maxillary sinus, the diagnostic evaluation of the sinus and the differential diagnosis of sinusitis. Endodontic implications of the maxillary sinus include extension of periapical infections into the sinus, the introduction of endodontic instruments and materials beyond the apices of teeth in close proximity to the sinus and the risks and complications associated with endodontic surgery.     

Influence of bonding agent composition on flexural properties of an Ultra-High Molecular Weight Polyethylene Fiber-Reinforced Composite

This study evaluated the influence of seven commercially available bonding agents on the flexural properties of an Ultra High Molecular Weight Polyethylene (UHMWPE) Fiber-Reinforced Composite (FRC). Nine groups (n=10 per group) of flexural strength specimens were prepared from an indirect composite reinforced with UHMWPE fiber and cured according to manufacturers' instructions (Groups A to I). Group I was a fiber-reinforced negative control without any bonding agent resination. A tenth group (Group J) was a positive control group prepared using indirect composite alone. The fiber reinforcement material for Groups A to H was resinated with one of the seven different bonding agents. Group H used the same bonding agent as for Group G specimens. However, the fiber was silanized before bonding agent application for Group G specimens. Specimens were stored wet for 24 hours at 37 degrees C before measuring flexural strength and modulus in three-point bend at a crosshead speed of 1 mm/minute. Scanning Electron Microscopy (SEM) was employed to assess the fiber-resin interface of representative samples. The mean (SD) flexural strength of the test groups impregnated by the bonding agents ranged from 169 (37) to 266 (39) MPa. Statistical analysis of the flexural strength data using one-way ANOVA revealed significant (p<0.05) differences between the test groups. There was catastrophic fiber/composite failure in the positive control group that had a mean flexural strength of 75 (8) MPa. Silane pre-treatment of UHMWPE fiber before impregnation with the bonding agent significantly reduced the flexural strength (p<0.05).     

Oral cancer. Practical prevention and early detection for the dental team

Approximately 2,000 patients a year are diagnosed with oral cancer in New York State. In an effort to control this deadly disease, Governor George Pataki has taken a leadership role in the United States by mandating and funding training for dentists in the prevention and early detection of oral cancer. The purpose of this article is to highlight the epidemiology of oral cancer, to show how the dental profession can contribute to the health of the citizens of New York State, and to provide practical guidelines for both tobacco cessation intervention and utilization of existing technology for the early detection of oral cancer and precancerous conditions in the general dental practice setting.     

Antibiotic resistance of subgingival species during and after antibiotic therapy

AIM: The purpose of the present investigation was to determine the percentage and identity of antibiotic-resistant species in subgingival plaque and saliva samples from chronic periodontitis patients treated by scaling and root planing followed by orally administered amoxicillin or metronidazole. METHOD: In all, 20 chronic periodontitis patients were selected for study. After clinical and microbiological monitoring, subjects were randomly assigned to receive either orally administered amoxicillin at the dosage of 500 mg, 3 times daily for 14 days or orally administered metronidazole at the dosage of 250 mg, 3 times daily for 14 days. For the antibiotic resistance determinations, subgingival plaque samples were taken from six posterior teeth at baseline, and 90 days; and from two randomly selected teeth at 3, 7 and 14 days during and after antibiotic administration. Samples were plated on enriched blood agar plates with or without either 2 micro g/mL metronidazole or 2 micro g/mL amoxicillin. Colonies were counted at 7 days. Significant differences in percentage of resistant organisms over time were determined by the Quade test. Microbial growth was washed from antibiotic-containing media and the identity of species determined using checkerboard DNA-DNA hybridization. Data were compared with those obtained in a previous study from subjects receiving SRP only or SRP followed by 14 days of orally administered doxycycline. The level of doxycycline used to determine antibiotic resistance in that study was 4 micro g/mL. RESULTS: The mean percentage of resistant isolates increased during antibiotic administration and returned to baseline levels by 90 days post therapy. The mean percentages (+/- SEM) of isolates resistant to 2 micro g/mL metronidazole were 53 +/- 9, 65 +/- 9, 79 +/- 4 and 69 +/- 7 at baseline, 3, 7 and 14 days during antibiotic administration, and 57 +/- 4, 64 +/- 5, 62 +/- 7 and 47 +/- 6 at 3, 7, 14 and 90 days after antibiotic administration. At the same time points, the percentage of resistant isolates to amoxicillin was 0.5 +/- 0.2, 22 +/- 12, 14 +/- 5 and 37 +/- 11 during, and 31 +/- 11, 8 +/- 3, 3 +/- 2 and 3 +/- 0.6 after, administration. Antibiotic-resistant isolates of resistant species detected during or after therapy were also detected prior to therapy. The most prevalent resistant species in the metronidazole-treated group were: A. naeslundii 1, S. constellatus, A. naeslundii 2, S. mitis, S. oralis, A. odontolyticus, S. sanguis, and in the amoxicillin-treated group: S. constellatus, P. nigrescens, E. saburreum, A. naeslundii 1, S. oralis, P. melaninogenica and P. intermedia. CONCLUSIONS: Systemic antibiotic administration transiently increased the percentage of resistant subgingival species, but a major component of subgingival plaque remained sensitive to the agents during their administration. Antibiotic-resistant isolates of resistant species could be detected in samples both prior to and after therapy. However, % antibiotic-resistant isolates returned to baseline levels 90 days after antibiotic administration.     

Clinical evaluation of patients with temporomandibular joint implants

PURPOSE: An undetermined number of patients with temporomandibular joint (TMJ) symptoms have been treated with intra-articular disc implants composed of Teflon ethylene/propylene or Teflon polytetrafluoroethylene and aluminum oxide (Proplast-Teflon; Vitek, Houston, TX). These implants have shown the potential to fragment in situ resulting in nonbiodegradable particles that stimulate a giant cell reaction and lead to degeneration of local structures, pain, and limitation of mandibular opening. We examined the possible relationship between TMJ implants and persistent pain, responses to sensory stimuli, quality of life, and systemic immune dysfunction. PATIENTS AND METHODS: This case series (32 patients) were referred from university-based orofacial pain centers and private practices from across the United States. Laboratory and clinical assessments evaluated orofacial pain symptoms, neurologic function, clinical signs and symptoms of rheumatologic disease, physical function, systemic measures of immune function, and behavioral measures. RESULTS: We found that TMJ implant patients appeared to have altered sensitivity to sensory stimuli, a higher number of tender points with a diagnosis of fibromyalgia, increased self-report of chemical sensitivity, higher psychologic distress and significantly lower functional ability. Systemic illness or autoimmune disease was not evident in this series of TMJ implant patients. CONCLUSIONS: Significant problems were noted on clinical assessment of TMJ implant patients. This is a US government work. There are no restrictions on its use.