A comparison between cutting torque and resonance frequency in the assessment of primary stability and final torque capacity of standard and TiUnite single-tooth implants under immediate loading

PURPOSE: In this study, standard Br?nemark System implants and Br?nemark TiUnite implants were evaluated regarding primary stability and placement torque. The correlation between placement torque and primary stability as well as the influence of implant design on placement torque and primary stability were examined. MATERIALS AND METHODS: Twelve patients who presented bilateral loss of either maxillary lateral incisors or premolars were treated with 24 immediately loaded dental implants. Each patient received 1 standard 3.75 x 13-mm Br?nemark System implant and one 3.75 x 13-mm TiUnite Mk III implant. One at a time, each implant was connected by a transducer to an Osstell machine that automatically translated a resonance frequency value for the implant into an implant stability quotient value. Osseocare equipment was used to measure the placement torque for both types of implants. RESULTS: Statistical analysis showed higher mean values for standard implants in relation to placement torque and resonance frequency values. DISCUSSION: There was no overall correlation between placement torque and resonance frequency values; this finding supported previous studies. CONCLUSION: Stability was shown to be higher for the standard implants. Mean values of torque resistance were higher for the standard implants than for the TiUnite implants. Implant design appeared to influence primary stability and placement torque.     

Effect of microwave treatments on dimensional accuracy of maxillary acrylic resin denture base

Microwave energy has been used as an alternative method for disinfection and sterilization of dental prostheses. This study evaluated the influence of microwave treatment on dimensional accuracy along the posterior palatal border of maxillary acrylic resin denture bases processed by water-bath curing. Thirty maxillary acrylic bases (3-mm-thick) were made on cast models with Clássico acrylic resin using routine technique. After polymerization and cooling, the sets were deflasked and the bases were stored in water for 30 days. Thereafter, the specimens were assigned to 3 groups (n=10), as follows: group I (control) was not submitted to any disinfection cycle; group II was submitted to microwave disinfection for 3 min at 500 W; and in group III microwaving was done for 10 min at 604 W. The acrylic bases were fixed on their respective casts with instant adhesive (Super Bonder) and the base/cast sets were sectioned transversally in the posterior palatal zone. The existence of gaps between the casts and acrylic bases was assessed using a profile projector at 5 points. No statistically significant differences were observed between the control group and group II. However, group III differed statistically from the others (p<0.05). Treatment in microwave oven at 604 W for 10 min produced the greatest discrepancies in the adaptation of maxillary acrylic resin denture bases to the stone casts.     

In vivo effect of a resin-modified glass ionomer cement on enamel demineralization around orthodontic brackets.

Because the risk of dental caries increases with the use of orthodontic appliances and its control cannot depend only on the patient's self-care, this study evaluated the effect of a glass ionomer cement on reducing enamel demineralization around orthodontic brackets. Fourteen orthodontic patients were randomly divided into 2 groups of 7; they received 23 brackets fitted to their premolars, bonded with either Concise (3M Dental Products, St Paul, Minn), a composite resin (control group), or Fuji Ortho LC (GC America, Chicago, Ill), a resin-modified glass ionomer cement (experimental group). The volunteers lived in a city that has fluoridated water, but they did not use fluoridated dentifrices during the study. After 30 days, the teeth were extracted and longitudinally sectioned; in the enamel around the brackets, demineralization was assessed by cross-sectional microhardness. The determinations were made at the bracket edge cementing limits, and at occlusal and cervical points 100 and 200 microm away from them. In all of these positions, indentations were made at depths from 10 to 90 microm from enamel surface. Analysis of variance showed statistically significant effects for position, material, depth, and their interactions (P<.05). The Tukey test showed that the glass ionomer cement was statistically more efficient than the control, reducing enamel demineralization in all analyses (P<.05). The use of glass ionomer cement for bonding can be encouraged because it decreases the development of caries around orthodontic brackets.     

Effect of root canal filling material and level of surgical injury on periodontal healing in dogs

Abstract— Some divergencies in the literature about periodontal healing after surgical injury stimulated the development of this experiment. The root canals of dogs' teeth were negotiated and filled by the lateral condensation technique with two kinds of sealers: Sealapex and zinc oxide-eugenol cement. In the second session, the bone tissue was exposed and one cabity was made at the apical third of the root and another at the border between the coronal and middle thirds, both penetrating into the root canal. Six months later the animals were sacrificed and the specimens prepared for histopathologic analysis. The results showed that the kind of filling material and the level of the periodontal wound exposing the root canal can influence the healing process ( P <.01).     

Calcium hydroxide and a corticosteroid-antibiotic association as dressings in cases of biopulpectomy. A comparative study in dogs' teeth

The subject of this paper was to study the behavior of the periapical tissues of dogs' teeth after biopulpectomy and dressing with calcium hydroxide or a corticosteroid-antibiotic association, before root canal filling with zinc oxide eugenol (ZOE) or Sealapex sealers. The teeth were overinstrumented and dressed for 7 days before the root canal filling. The animals were sacrificed 180 days after treatment and the specimens were prepared for morphological analysis. Specimens treated with Sealapex presented a higher number of cases with biological closure than ZOE. When the root canals were filled with ZOE, better results were observed with the use of the Ca(OH)2 dressing.     

Effects of subdermal implants of estradiol and testosterone on the endometrium of postmenopausal women

A retrospective review of the medical records of 258 postmenopausal patients using estradiol and testosterone implants as combined hormone therapy was carried out to evaluate the effects of testosterone on the endometrium after two years of continuous use. Endometrial thickness was measured by ultrasonography. Histology was performed on samples of thickened endometria obtained during hysteroscopy with biopsy. In the 44 patients in whom endometrial thickening was >5 mm at the end of the second year of implant use, the most frequent finding at hysteroscopy was polypoid lesion in 61.3% of cases, followed by normal uterine cavity in 31.8% of cases and submucous myoma in 6.8%. Histology of the endometrial samples confirmed endometrial polyp in 38.6% of cases, a histologically normal endometrium in 31.8% of cases, simple endometrial hyperplasia in 20.4% of cases, and myoma and atrophic endometrium in 4.5%. It is possible that testosterone may exert its antiproliferative effects on the endometrium but not on polyps in an action similar to that exerted by combined estrogen/progestin therapies. A greater incidence of simple, low-grade endometrial hyperplasia was found in our study compared with studies using continuous estrogen/progestin regimens. The use of progestins as the ideal endometrial protection should therefore be reconsidered.     

Endoscopic ligation of the anterior ethmoidal artery: a cadaver dissection study

Anterior ethmoidal artery (AEA) ligation may be necessary in cases of severe epistaxis not controllable with traditional therapy. Endoscopic endonasal ligation of the AEA is not used frequently; there are few studies in the literature for standardization of the endoscopic technique for this vessel.Aim: To demonstrate the feasibility of periorbital AEA ligation in a transethmoidal endoscopic approach.Methods: A prospective study where 50 nasal cavities were dissected. After anterior ethmoidectomy and partial removal of lamina papyracea, the periorbital area was carefully dissected along a subperiosteal plane to identify the AEA. The vessel was exposed within the orbit and dissected.Results: Data on technical difficulties, complications, the learning curve and anatomical variations were gathered.Conclusion: An endonasal endoscopic approach to the AEA within the orbit was shown to be feasible. Identifying the artery is not difficult, and this technique avoids external incisions. This approach appears to be an excellent alternative for approaching the AEA. Further clinical studies are needed to demonstarte the benefits of this technique.     

Reduced susceptibility to azithromycin and high percentages of penicillin and tetracycline resistance in Neisseria gonorrhoeae isolates from Manaus, Brazil, 1998

BACKGROUND: The identification of Neisseria gonorrhoeae isolates resistant to antimicrobial agents currently recommended for the treatment of gonococcal infections continues to escalate globally. Thus, in some areas, resistance to fluoroquinolone drugs is commonplace; several reports document resistance to third-generation cephalosporins, and the sporadic isolation of spectinomycin-resistant isolates continues unabated. Gonococcal resistance to azithromycin, an antibiotic used for the primary treatment of gonococcal infections in some Latin American countries, also has been described. Because the prevalence of resistant isolates is insufficiently documented in many areas of Latin America, the efficacy of locally recommended therapies for gonococcal infections is often unknown. GOAL: To determine the antimicrobial susceptibility and strain types of N gonorrhoeae isolates collected in Manaus, Brazil. These data will establish antimicrobial susceptibility baseline data for the region as a reference point for future surveillance. STUDY DESIGN: Consecutive N gonorrhoeae isolates from urethral and endocervical specimens were collected and examined for identity, antimicrobial susceptibility, and strain type (plasmid content, tetM type, auxotype, and serovar). RESULTS: Most of the isolates (65/81; 85.2%) were resistant to tetracycline, penicillin, or both, with the majority (n = 62) carrying plasmid-mediated resistance to tetracycline (tetracycline-resistant N gonorrhoeae [TRNG]). All of the TRNG contained the Dutch-type tetM plasmid, and 18 were A/S class NR/IA-02. Penicillinase-producing N gonorrhoeae comprised 8.2% (7/81) of the isolates. Of these seven isolates, four also were TRNG, and two carried chromosomal resistance to tetracycline. The isolates were susceptible to ciprofloxacin, spectinomycin, and ceftriaxone. However, 23 isolates were characterized by reduced susceptibility to azithromycin (MIC, 0.25-0.5 microg/ml), and one isolate had reduced susceptibility to ciprofloxacin (MIC, 0.25 microg/ml). CONCLUSIONS: This study supports the continued use of third-generation cephalosporins, spectinomycin, and fluoroquinolone drugs for the primary treatment of gonococcal infections in Manaus. The occurrence of isolates with reduced susceptibility to azithromycin and ciprofloxacin underscores the importance of ongoing antimicrobial susceptibility monitoring to support decisions regarding appropriate drugs for the treatment of gonococcal infections.