Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.     

综合医院发热门诊应对新型冠状病毒肺炎的应急管理

目的 探讨综合医院发热门诊应对新型冠状病毒感染肺炎的应急管理方法及效果。 方法 加强发热门诊的管理，包括优化发热预检分诊工作流程、合理布局发热门诊、修订发热门诊工作职责与流程指引、合理调配人力资源、加强相关人员培训、严格落实院感防控措施、提供后勤保障、加强健康宣教与管理。 结果 接诊患者13 761例次，采集咽拭子591例次，静脉输液11 973例次，氧气吸入998例次。 结论 加强综合医院发热门诊管理，能有效提高护理人员对新型冠状病毒肺炎疫情的应对能力，保障护理安全。     

肛肠疾病手术前后肛管直肠压力测定的应用

目的:探讨肛肠疾病手术前后肛管直肠压力测定的应用。方法:将2018年5月-2019年5月在上海市松江区方塔中医医院及上海中医药大学附属曙光医院肛肠科行手术治疗的826例肛肠疾病患者作为研究对象,其中,选择性痔上黏膜吻合术246例、单纯外剥内扎术115例、外剥内扎结合内痔套扎术(Automatic Ligation of Hemorrhoids,RPH)153例、低位肛瘘切除术177例、高位肛瘘切开挂线术135例,分别于术前及术后1个月测定肛管直肠压力。结果:选择性痔上黏膜吻合术后直肠静息压、肛管静息压明显低于术前,肛管舒张压高于术前(P<0.05),但肛管最大收缩压与术前相比无明显差异(P>0.05);单纯外剥内扎术术后直肠静息压、肛管静息压明显低于术前,肛管舒张压、肛管最大收缩压明显高于术前(P<0.05);外剥内扎结合内痔套扎术术后直肠静息压、肛管静息压明显低于术前,肛管舒张压、肛管最大收缩压明显高于术前(P<0.05);低位肛瘘切除术术后直肠静息压、肛管静息压、肛管舒张压均高于术前(P<0.05),而肛管最大收缩压与术前相比无明显差异(P>0.05);高位肛瘘切开挂线术术后直肠静息压高于术前,肛管静息压、肛管舒张压低于术前(P<0.05),而与肛管最大收缩压术前相比无明显差异(P>0.05)。结论:肛肠疾病手术前后肛管直肠压力测定的应用效果显著,能准确判断手术效果及患者恢复情况,为医师的进一步诊治奠定了良好基础。     

某医学期刊送审论文的统计学问题分析

<正>医学科研论文大多涉及数据收集和统计分析,正确合适的数据统计分析方法,才可能保证科研结果的正确性。虽然论文撰写的国际规范对数据统计学分析有明确的要求,科研人员也学习过医学统计学,但如何正确选择统计分析方法,准确描述统计分析结果,仍然是很多科研人员比较困惑的问题。有些作者在论文中误用、错用统计学方法,直接影响研究结果的可信度,导致论文质量不高或者结论错误[1-3]。本文对某杂志2014年至2015年度送审论文中的统计学问题进行分析,旨在帮助作者避免类似的错误,提升科研论文质量。资料与方法     

Age-specific trends in health-related quality of life among US adults: findings from National Health and Nutrition Examination Survey, 2001–2016

Quality of Life Research - Health-related quality of life (HRQoL) is an important indicator of population health, yet no age-specific trend analyses in HRQoL have been conducted with a nationally...     

多原发结直肠癌的临床特征和预后

目的探讨多原发结直肠癌的临床特征和预后。方法回顾性分析南京医科大学第一附属医院2013年1月至2018年12月收治的42例多原发结直肠癌患者的临床资料,对其临床病理特征、诊治及预后进行总结。结果符合多原发结直肠癌诊断的患者42例,占同期收治的所有结直肠癌患者的1.20%(42/3499),病理类型以腺癌为主。其中,同时性多原发癌32例,年龄38~86岁,中位年龄66岁,共发现73处结直肠癌灶,多位于近端结肠、乙状结肠及直肠;共检出淋巴结527枚,阳性10枚(1.9%),淋巴结阳性患者占同时性多原发癌的37.5%(12/32);27例为双原发癌,3例为三原发癌,2例为五原发癌;1、3年总生存率分别为83.75%和74.38%。异时性多原发癌10例,年龄33~86岁,第一癌多位于直肠和乙状结肠区域,第二癌多位于升结肠区域;共检出淋巴结276枚,阳性率12.3%(34枚),1、3年总生存率分别为100.00%和66.67%。结论多原发结直肠癌在临床上不少见,其分布有一定规律。临床中应引起重视,提高早期诊断率。应早期手术治疗以提高患者的生存率。     

Heteroepitaxy of Cerium Oxide Thin Films on Cu(111)

An important part of fundamental research in catalysis is based on theoretical and modeling foundations which are closely connected with studies of single-crystalline catalyst surfaces. These so-called model catalysts are often prepared in the form of epitaxial thin films, and characterized using advanced material characterization techniques. This concept provides the fundamental understanding and the knowledge base needed to tailor the design of new heterogeneous catalysts with improved catalytic properties. The present contribution is devoted to development of a model catalyst system of CeO₂ (ceria) on the Cu(111) substrate. We propose ways to experimentally characterize and control important parameters of the model catalyst—the coverage of the ceria layer, the influence of the Cu substrate, and the density of surface defects on ceria, particularly the density of step edges and the density and the ordering of the oxygen vacancies. The large spectrum of controlled parameters makes ceria on Cu(111) an interesting alternative to a more common model system ceria on Ru(0001) that has served numerous catalysis studies, mainly as a support for metal clusters.