Direct evidence for the involvement of carbohydrate sequences in human sperm-zona pellucida binding

Several lines of evidence indicate that mammalian fertilization is initiated via a binding process that is dependent upon the recognition of oligosaccharide sequences associated with zona pellucida (ZP) glycoproteins. Here, specific chemical and enzymatic methods were employed to modify human ZP and to test their effects on sperm binding in the hemizona assay system (HZA). Periodate oxidation of human ZP under very mild conditions (10 min, 0 degrees C, 1 mM sodium m- periodate) that attacks only terminal sialic acid resulted in a 30% loss of human sperm binding in the HZA [hemizona index (HZI) = 70.2 +/- 10.9, n = 22; P < 0.05]. Periodate oxidation under mild conditions (1 h, 23 degrees C, 10 mM sodium m-periodate) caused a 40% decrease in binding (HZI = 60.8 +/- 10.3; n = 24; P< 0.01). Treatment of human ZP with neuraminidase caused a substantial increase in sperm binding to human ZP (HZI = 297 +/- 45, n = 22; P < 0.01). These findings indicate that there are sialic acid dependent binding sites coexisting with binding sites that are obscured by sialic acid. To determine the periodate sensitivity of these obscured sites, hemizona were first digested with neuraminidase and subsequently subjected to mild periodate oxidation. The combined enzymatic and chemical treatments caused a 79% decrease in sperm binding compared to control hemizona (HZI = 20.7 +/- 4.4, n = 16; P < 0.001). Human sperm-ZP interaction was also increased by digestion of human ZP with endo-beta-galactosidase (HZI = 710 +/- 232, n = 14; P < 0.01), indicating that potential binding sites for spermatozoa are also obscured by lactosaminoglycan sequences. These studies support a definitive role for the involvement of ZP-associated glycans in the binding of human spermatozoa to oocytes.      

Antibodies to HIV-1 gp41 recognize synthetic peptides of human IFN-alpha and IFN-beta

Based on our finding that a common epitope exists between HIV-1 gp41 and human type I interferons (IFN-alpha and IFN-beta), and increased levels of antibodies against human IFN-alpha and IFN-beta were observed in HIV-1-infected individuals, we tried to explain the mechanism of increased levels of antibodies. Mouse antisera recognizing HIV-1 recombinant soluble (rs) gp41 (aa 539-684) interacted with two synthetic peptides sequence-corresponding to the IFN-alpha/beta receptor binding site on human IFN-alpha and IFN-beta, while normal mouse serum (pooled normal sera) did not. The anti-rspg41 antisera after adsorption by IFN-beta sepharose column lost the activity of interaction with both synthetic peptides. In another experiment, rsgp41 could bind to sepharose column conjugated with anti-IFN-beta polyclonal antibodies (IgG). These results indicate that the common epitope on gp41 and type I interferons could induce antibodies recognizing the receptor binding site on IFN-alpha and IFN-beta, suggesting that increased levels of antibodies against IFN-alpha and IFN-beta in HIV-1-infected individuals could be induced by gp41.     

Activation of group I mGluRs elicits different responses in murine CA1 and CA3 pyramidal cells

The group I metabotropic glutamate receptor agonist DHPG has been shown to produce two major effects on CA3 pyramidal cells at rest: a reduction in the background conductance and an activation of a voltage-gated inward current ( I _mGluR(V)). Both effects contribute to depolarising CA3 pyramidal cells and the latter has been implicated in eliciting prolonged epileptiform population bursts. We observed that DHPG-induced depolarisation was smaller in CA1 pyramidal cells than in CA3 cells. Voltage clamp studies revealed that while DHPG elicited I _mGluR(V) in CA3 pyramidal cells, such a response was absent in CA1 pyramidal cells. Both mGluR1 and mGluR5 have been localised in CA3 pyramidal cells, whereas only mGluR5 has been detected in CA1 pyramidal cells. Using mGluR1 knockout mice, we evaluated whether the absence of an I _mGluR(V) response can be correlated with the absence of mGluR1. In these experiments, DHPG failed to elicit I _mGluR(V) in CA3 pyramidal cells. This suggests that the smaller depolarising effects of DHPG on wild-type CA1 pyramidal cells is caused, at least in part, by the absence of I _mGluR(V) in these cells and that the difference in the responses of CA1 and CA3 cells may be attributable to the lack of mGluR1 in CA1 pyramidal cells.     

母血与脐血血清游离氨基酸谱的比较

本实验取在分娩过程中的50对健康足月妊娠母亲的静脉血与其分娩的胎儿脐带血分别测定其血清中游离氨基酸的浓度,发现:(1)脐血中绝大多数氨基酸的浓度都显著高于母血。(2)分娩中产妇血清游离氨基酸总浓度高于非妊娠育龄妇女。(3)男性胎儿和女性胎儿的脐血氨基酸浓度除胱氨酸以外均无显著性差异。     

Possible role of sarcolemmal Ca2+/Mg2+ ATPase in heart function

The Ca2+/Mg2+ ATPase, which is activated by millimolar concentrations of Ca2+ or Mg2+, has been found to exist in the heart sarcolemmal membrane. Although a great deal of work has been carried out to characterize the enzyme activity as well as to purify the enzyme, the physiological function of the enzyme remains to be elucidated. This enzyme has been shown to be different from other known ion transport ATPases such as Na(+)-K+ ATPase and Ca2(+)-stimulated ATPase in terms of the activation kinetics of various cations, the sensitivity towards specific inhibitors, and the molecular weights. In view of the existing data and circumstantial evidence, it has been proposed that the Ca2+/Mg2+ ATPase is involved in the entry of Ca2+ into the cardiac cells, the transport of Mg2+ across the cell membrane, and extracellular ATP signal transduction.     

Strategies to improve the signal and noise performance of active matrix, flat-panel imagers for diagnostic x-ray applications

A theoretical investigation of factors limiting the detective quantum efficiency (DQE) of active matrix flat-panel imagers (AMFPIs), and of methods to overcome these limitations, is reported. At the higher exposure levels associated with radiography, the present generation of AMFPIs is capable of exhibiting DQE performance equivalent, or superior, to that of existing film-screen and computed radiography systems. However, at exposure levels commonly encountered in fluoroscopy, AMFPIs exhibit significantly reduced DQE and this problem is accentuated at higher spatial frequencies. The problem applies both to AMFPIs that rely on indirect detection as well as direct detection of the incident radiation. This reduced performance derives from the relatively large magnitude of the square of the total additive noise compared to the system gain for existing AMFPIs. In order to circumvent these restrictions, a variety of strategies to decrease additive noise and enhance system gain are proposed. Additive noise could be reduced through improved preamplifier, pixel and array design, including the incorporation of compensation lines to sample external line noise. System gain could be enhanced through the use of continuous photodiodes, pixel amplifiers, or higher gain x-ray converters such as lead iodide. The feasibility of these and other strategies is discussed and potential improvements to DQE performance are quantified through a theoretical investigation of a variety of hypothetical 200 microm pitch designs. At low exposures, such improvements could greatly increase the magnitude of the low spatial frequency component of the DQE, rendering it practically independent of exposure while simultaneously reducing the falloff in DQE at higher spatial frequencies. Furthermore, such noise reduction and gain enhancement could lead to the development of AMFPIs with high DQE performance which are capable of providing both high resolution radiographic images, at approximately 100 microm pixel resolution, as well as variable resolution fluoroscopic images at 30 fps.     

Improved typing procedure for the polymorphic single-copy RLA-DQA gene of the rabbit reveals a new allele

The DQA gene of the rabbit major histocompatibility complex (MHC, RLA) is highly polymorphic and, in contrast to those reported for other mammalian species, is present as a single copy. These properties allow use of this gene in a method to type the class II locus of RLA by a combination of single-stranded conformational polymorphism (SSCP) and heteroduplex (HD) analysis. Familial segregation of RLA-DQA was shown and RLA class II types for rabbits of unknown pedigree were determined using migration patterns of amplified genomic DNA. Typing results were confirmed in experiments where unknown samples were mixed with products from rabbits of RLA types defined by sequence analysis. These analyses detected an RLA-DQA allele in addition to the five previously described; this new allele is designated RLA-DQA-F.     

Homozygosity by descent for a rare mutation in the myophosphorylase gene is associated with variable phenotypes in a Druze family with McArdle disease.

We examined a large consanguineous Druze family with McArdle disease for mutations in the glycogen myophosphorylase (PYGM) gene. All affected subjects were autozygous for a single G to A transition that abolishes the 5' consensus splice site in the first nucleotide of intron 14. The G to A transition is a rare mutation, with only one previous report in a single white subject heterozygous for this mutation and another, more common, mutation at codon 49. The kindred in our study is the first family reported in which disease is caused by homozygosity for this rare mutation. This kindred was originally reported as the first familial case of McArdle disease in the Druze.     

The x-ray sensitivity of amorphous selenium for mammography

A study of the x-ray sensitivity of amorphous selenium (a-Se) for digital mammography has been performed. A uniform layer of a-Se was deposited on a glass substrate with electrodes on both surfaces. The deposition procedure was identical to that used for a-Se flat-panel detectors. A high voltage was applied to the top surface of the a-Se layer in order to establish an electric field E(Se). Then the sample was exposed to x rays with 27 kVp spectra generated from an x-ray tube with a molybdenum (Mo) target. The mean x-ray energy of the spectrum used was approximately 16.6 keV. The x-ray current generated by the a-Se layer was measured as a function of E(Se). From the current measurement and the estimation of total x-ray energy absorbed in the a-Se, the energy required to create one electron-hole pair (EHP), W, was determined as a function of E(Se). It was found that at the most commonly used E(Se) of 10 V/microm, W was measured as 64 eV. This is considerably higher than the widely accepted typical value of W = 50 eV measured at higher x-ray photon energies (e.g., 50 keV). The dependence of W as a function of E(Se) can be best fitted using the empirical expression of E(Se)-gamma. This relationship is consistent with the results obtained at higher x-ray energies. This article provides an accurate measurement of x-ray sensitivity of a-Se at mammographic energies independent of detector operation, such as the most recently developed flat-panel detectors. The results will be a useful tool for investigation and optimization of a-Se-based x-ray imaging detectors, such as determination of pixel fill-factor and optimal E(Se) during operation.