Hardening Slurries with Fluidized-Bed Combustion By-Products and Their Potential Significance in Terms of Circular Economy

Hardening slurries (water-bentonite-binder mixtures) constitute a well-established material used broadly, i.a., for cut-off walls in civil and water engineering. Although they usually contain Portland cement, similar to common concrete, their properties differ greatly, mostly due to a much higher water content. This characteristic of hardening slurries creates unique opportunities for the utilization of significant quantities of industrial by-products that are deemed problematic in the concrete industry. This article investigates the effect of the addition of by-products of fluidized-bed combustion of hard, brown coal and municipal sewage sludge, as well as ground granulated blast furnace slag, on the properties of slurries. Unconfined compressive strength tests, as well as mercury porosimetry, scanning electron microscopy, and X-ray diffraction analyses were performed. The results suggest that it is possible to design hardening slurry mixes of desired properties, both in liquid and solid state, containing at least 100–300 kg/m³ of industrial waste. This includes cement-free slurries based entirely on industrial by-products as binders. In addition, the analyzed slurries exhibited good chemical resistance to landfill eluates, at the same time effectively immobilizing heavy metals. It was concluded that hardening slurry technology can ensure the safe deposition of significant amounts of waste that would be otherwise difficult to manage, thus contributing to the circular economy concept.     

Green Approach to Develop Bee Pollen-Loaded Alginate Based Nanofibrous Mat

Green electrospun materials are gaining popularity in the quest for a more sustainable environment for human life. Bee pollen (BP) is a valuable apitherapeutic product and has many beneficial features such as antioxidant and antibacterial properties. Alginate is a natural and low-cost polymer. Both natural materials show good compatibility with human tissues for biomedical applications and have no toxic effect on the environment. In this study, bee pollen-loaded sodium alginate and polyvinyl alcohol (SA/PVA) nanofibrous mats were fabricated by the electrospinning technique. The green electrospun nanofibrous mats were analyzed by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FTIR), and differential scanning calorimeter (DSC). According to the findings of the study, the toxin-free electrospinning method is suitable for producing green nanomaterial. Because of the useful properties of the bee pollen and the favorable biocompatibility of the alginate fibers, the bee pollen-loaded SA/PVA electrospun mats have the potential for use in a variety of biomedical applications.     

Edgewise Compressive Behavior of Composite Structural Insulated Panels with Magnesium Oxide Board Facings

Edgewise compression response of a composite structural insulated panel (CSIP) with magnesium oxide board facings was investigated. The discussed CSIP is a novel multifunctional sandwich panel introduced to the housing industry as a part of the wall, floor, and roof assemblies. The study aims to propose a computational tool for reliable prediction of failure modes of CSIPs subjected to concentric and eccentric axial loads. An advanced numerical model was proposed that includes geometrical and material nonlinearity as well as incorporates the material bimodularity effect to achieve accurate and versatile failure mode prediction capability. Laboratory tests on small-scale CSIP samples of three different slenderness ratios and full-scale panels loaded with three different eccentricity values were carried out, and the test data were compared with numerical results for validation. The finite element (FE) model successfully captured CSIP’s inelastic response in uniaxial compression and when flexural action was introduced by eccentric loads or buckling and predicted all failure modes correctly. The comprehensive validation showed that the proposed approach could be considered a robust and versatile aid in CSIP design.     

The Influence of the Thickness of Compact TiO2 Electron Transport Layer on the Performance of Planar CH3NH3PbI3 Perovskite Solar Cells

In recent years, lead halide perovskites have attracted considerable attention from the scientific community due to their exceptional properties and fast-growing enhancement for solar energy harvesting efficiency. One of the fundamental aspects of the architecture of perovskite-based solar cells (PSCs) is the electron transport layer (ETL), which also acts as a barrier for holes. In this work, the influence of compact TiO₂ ETL on the performance of planar heterojunction solar cells based on CH₃NH₃PbI₃ perovskite was investigated. ETLs were deposited on fluorine-doped tin oxide (FTO) substrates from a titanium diisopropoxide bis(acetylacetonate) precursor solution using the spin-coating method with changing precursor concentration and centrifugation speed. It was found that the thickness and continuity of ETLs, investigated between 0 and 124 nm, strongly affect the photovoltaic performance of PSCs, in particular short-circuit current density (J_SC). Optical and topographic properties of the compact TiO₂ layers were investigated as well.     

Wear Resistance Improvement of Cemented Tungsten Carbide Deep-Hole Drills after Ion Implantation

The paper is dedicated to the life prolongation of the tools designed for deep-hole drilling. Among available methods, an ion implantation process was used to improve the durability of tungsten carbide (WC)-Co guide pads. Nitrogen fluencies of 3 × 10¹⁷ cm⁻², 4 × 10¹⁷ cm⁻² and 5 × 10¹⁷ cm⁻² were applied, and scanning electron microscope (SEM) observations, energy dispersive spectroscopy (EDS) analyses, X-ray photoelectron spectroscopy (XPS) and Secondary Ion Mass Spectrometry (SIMS) measurements were performed for both nonimplanted and implanted tools. The durability tests of nonimplanted and the modified tools were performed in industrial conditions. The durability of implanted guide pads was above 2.5 times greater than nonimplanted ones in the best case, presumably due to the presence of a carbon-rich layer and extremely hard tungsten nitrides. The achieved effect may be attributed to the dissociation of tungsten carbide phase and to the lubrication effect. The latter was due to the presence of pure carbon layer with a thickness of a few dozen nanometers. Notably, this layer was formed at a temperature of 200 °C, much smaller than in previously reported research, which makes the findings even more valuable from economic and environmental perspectives.     

Effect of Fine Size-Fractionated Sunflower Husk Biochar on Water Retention Properties of Arable Sandy Soil

Biochar application has been reported to improve the physical, chemical, and hydrological properties of soil. However, the information about the size fraction composition of the applied biochar as a factor that may have an impact on the properties of soil-biochar mixtures is often underappreciated. Our research shows how sunflower husk biochar (pyrolyzed at 650 °C) can modify the water retention characteristics of arable sandy soil depending on the biochar dose (up to 9.52 wt.%) and particle size (<50 µm, 50–100 µm, 100–250 µm). For comparison, we used soil samples mixed with biochar passed through 2 mm sieve and an unamended reference. The addition of sieved biochar to the soil caused a 30% increase in the available water content (AWC) in comparing to the soil without biochar. However, the most notable improvement (doubling the reference AWC value from 0.078 m³ m⁻³ to 0.157 m³ m⁻³) was observed at the lowest doses of biochar (0.95 and 2.24 wt.%) and for the finest size fractions (below 100 µm). The water retention effects on sandy soil are explained as the interplay between the dose, the size of biochar particles, and the porous properties of biochar fractions.     

Influence of insertion-deletion polymorphism of the angiotensin converting enzyme gene on left ventricular hypertrophy in patients with aortic stenosis--differences in men and women

The role of different parameters (including genetic factors) on the timing and extend of left ventricle hypertrophy in patients with aortic stenosis is not defined. In our study we analyze the influence of clinical, echocardiographic parameters and I/D polymorphism of the angiotensin converting enzyme gene on the left ventricle hypertrophy (left ventricle mass index) in this group of patients. The study was done with the group of 302 pts with aortic stenosis--120 women and 182 men; mean age 58 +/- 11 yrs. Stepwise (backward) regression was used to assess the influence of the analyzed parameters (age, gender, history of hypertension, EF, MGA, presence of significant coronary artery disease and I/D ACE polymorphism) on the LVH in the all pts and in the women and the men separately. In the whole group the LVMI depends on EF (t = -6.5; p = 0.0001--higher LVMI in lower EF), MGA (t = 3.9; p = 0.0001--higher LVMI in higher MGA) and gender (t = 2.8; p = 0.005--higher LVMI in men). In women LVMI was related with EF (t = -3.6; p = 0.001--higher LVMI in lower EF), age (t = 2.9; p = 0.004--higher LVMI in older pts) and MGA (t = 2.5; p = 0.013--higher LVMI in higher MGA). In men the LVMI depends on EF (t = -4.8; p = 0.0001--higher LVMI in lower EF) and MGA (t = 1.98; p = 0.049--higher LVMI in higher MGA). Significant relationship between LVMI and results of I/D ACE polymorphism was observed both in women and men. I/D polymorphism relationship with LVMI was divergent in these 2 groups--association of higher LVMI with lack of DD type of polymorphism in women and presence of DD polymorphism in men. CONCLUSIONS: 1. Left ventricle hypertrophy in pts aortic stenosis is higher in men than in women. 2. In women left ventricle hypertrophy is related with ejection fraction, maximal aortic gradient, age and I/D ACE polymorphism; in men it is related to EF, MGA and I/D ACE polymorphism. 3. The influence of I/D ACE polymorphism on the left ventricle hypertrophy is divergent in women and men--in women related to the lack of DD polymorphism, in men related to the presence of DD polymorphism.     

Impact of Left Ventricular Remodeling on Ventricular Repolarization and Heart Rate Variability in Patients after Myocardial Infarction Treated with Primary PCI: Prospective 6 Months Follow‐up

Background: The relation between postinfarction left ventricle remodeling (LVR), autonomic nervous system and repolarization process is unclear. Purpose of the study was to assess the influence of LVR on the early (QTpeak) and late (TpeakTend) repolarization periods in patients after myocardial infarction (MI) treated with primary PCI. The day‐to‐night differences of repolarization parameters and the relation between QT and heart rate variability (HRV) indices, as well left ventricle function were also assessed. Methods: The study cohort of 104 pts was examined 6 months after acute MI. HRV and QT indices (corrected to the heart rate) were obtained from the entire 24‐hour Holter recording, daytime and nighttime periods. Results: LVR was found in 33 patients (31.7%). The study groups (LVR+ vs LVR?) did not differ in age, the extent of coronary artery lesions and treatment. Left ventricle ejection fraction (LVEF) was lower (38%± 11% vs 55%± 11%, P < 0.001), both QTc (443 ± 26 ms vs 420 ± 20 ms, P < 0.001) and TpeakTendc (98 ± 11 ms vs 84 ± 12 ms, P < 0.005) were longer in LVR + patients, with no differences for QTpeakc. Trends toward lower values of time‐domain (SDRR, rMSSD) HRV parameters were found in LVR+ pts. Day‐to‐night difference was observed only for SDRR, more marked in LVR‐group. Remarkable relations between delta LVEF (6 months minus baseline), delta LVEDV and TpeakTendc were found, with no such relationships for QTpeakc. Conclusions: The patients with LVR have longer repolarization time, especially the late phase‐ TpeakTend, which represents transmural dispersion of repolarization. Its prolongation seems to be related to local attributes of myocardium and global function of the left ventricle but unrelated to the autonomic nervous influences. Remodeling with moderate LV systolic dysfunction is associated with insignificant decrease in HRV indices and preserved circadian variability.