Dimensional reproduction in rotational panoramic radiography

The customary mathematical expressions for magnification in rotational panoramic radiography are examined. It is shown that although these expressions yield correct results for small objects placed perpendicularly to the central ray of the beam, they must be corrected in other situations.     

Wear behavior of new composite restoratives

This study investigated the wear resistance of recently introduced nanofill (Filtek Supreme [FS], 3M-ESPE) and ormocer (Admira [AM], Voco) composites and compared their wear characteristics to microfill (Filtek A110 [AO], 3M-ESPE]), minifill (Esthet X [EX], Dentsply; Filtek Z250 [ZT], 3M-ESPE) and polyacid-modified (Dyract AP [DY], Dentsply) composites. Six specimens were made for each material. The specimens were conditioned for one week in distilled water at 37 degrees C and subjected to wear testing at 20 MPa contact stress against SS304 counter-bodies using reciprocal compression-sliding wear instrumentation. Distilled water was used as lubricant. Wear depth (microm) was measured using profilometry every 5,000 cycles up to 20,000 cycles. The results were analyzed using ANOVA/Scheffe's test (p<0.05). Wear of the materials was cycle and fatigue dependent. Although no significance in wear was observed between materials after 5,000 cycles of wear testing, significant differences were observed at 10,000 cycles and greater. After 20,000 cycles of wear testing, ranking was as follows: ZT > DY >AM > AO > FS > EX. Wear ranged from 39.90 microm for EX to 113.32 microm for ZT. The wear resistance of ZT and DY was significantly lower than AO, FS and EX In addition, ZT experienced significantly more wear than AM. Under the conditions of this in-vitro study, the wear resistance of nanofill and ormocer composites was comparable or superior to polyacid-modified, microfill and minifill composites.     

Immunohistochemical studies of the neurochemical markers, CGRP, enkephalin, galanin, gamma-MSH, NPY, PHI, proctolin, PTH, somatostatin, SP, VIP, tyrosine hydroxylase and neurofilament in nerves and cells of the human attached gingiva

Punch biopsies were obtained from the buccal gingiva of the lower third molars. Thin nerve fibres, immunoreactive for calcitonin gene-related peptide (CGRP) or substance P (SP), with possible sensory function, were found in the propria often close to the epithelium, sometimes even penetrating into the basal layers. gamma-Melanocyte stimulating hormone (gamma-MSH)-like immunoreactivity was found in sparsely distributed single cells (except in one specimen containing a dense infiltration), resembling neutrophilic granulocytes of the propria. gamma-MSH was present in several single smooth axons and in thick axon bundles of the propria. Surrounding the blood vessels, neuropeptide Y (NPY), tyrosine hydroxylase (TH), vasoactive intestinal polypeptide (VIP) and peptide histidine isoleucine amide (PHI) immunoreactive nerve fibres were observed. NPY and TH-positive fibres probably represent sympathetic nerve terminals and VIP/PHI-immunoreactive ones may have a parasympathetic function. Papillae of the propria contained VIP-positive fibres not obviously related to blood vessels. The distribution in papillae of PHI-like immunoreactivity was similar but the PHI-positive reaction was also present in a few cells of the propria, especially near blood vessels. Somatostatin (SOM)-positive reaction occurred in a few dendritic-type cells near or in the epithelium and single nerve fibres close to the epithelium. Several thick axon bundles of the propria contained neurofilament (NF)-immunoreactive material. Some thin NF-fibres were found in the papillae and some seemed to penetrate into the epithelium. No galanin, methionine-enkephalin, parathyroid hormone or proctolin immunoreactive material was found. The rather rich content of several neuropeptides in human attached gingiva, as well as other neurochemical markers, is probably associated with sensory and autonomic functions.     

Effectiveness of composite cure associated with different light-curing regimes

This study investigated the use of various light-curing regimens with standardized light energy density on the effectiveness of cure of a visible light activated resin composite (Z100, 3M-ESPE). A light-cure unit (Variable Intensity Polymerizer (VIP), BISCO Inc) which permitted individual control over time and intensity, was used. The five light-curing modes investigated include Pulse Delay (PD), Pulse Cure (PC), Soft-start (SS), Turbo (T) and Control (C). Effectiveness of cure was established by measuring the top and bottom Knoop hardness of 2-mm thick composite specimens using a digital microhardness tester (n=5, load=500g; dwell time=15 seconds) immediately and at one-day post-polymerization. Data obtained was analyzed using one-way ANOVA/Scheffe's post hoc test and Independent Samples t-tests (p<0.05). Top KHN observed immediately after polymerization with C was significantly lower than PD. At one day post-polymerization, the top KHN obtained with C was significantly lower than PD, SS and T. No significant difference in bottom KHN was observed among the different curing modes immediately after curing. At one day post-polymerization, the bottom KHN obtained with C was significantly lower than SS and T. Regardless of curing regimens, top and bottom values at one day were significantly higher than those observed immediately after light polymerization. No significant difference in mean hardness ratio was observed among the different curing regimens immediately and one day later. Effectiveness of the cure at the bottom surfaces of composites may be increased by soft-start and turbo polymerization regimens.     

Plaque development in relation to the periodontal condition and bacterial load of the saliva

AIM: To investigate the influence of the oral bacterial load on plaque development in various groups of periodontitis patients and in healthy subjects. MATERIAL AND METHODS: This study included subjects with a healthy periodontium, a healthy reduced periodontium after treatment, an inflamed reduced periodontium after treatment and untreated periodontitis. At the start of the study, subjects were instructed to rinse with 10 ml reduced transport fluid (RTF) for 10 s in order to evaluate the oral bacterial load. The microbiological evaluation included anaerobe culture and phase-contrast microscopy. Next, the amount of plaque and the clinical condition were evaluated. Thereafter, all supragingival plaque was removed and patients were instructed to refrain from all oral hygiene procedures for 19 h. Subsequently, the rinsing procedure and the evaluation of the amount of plaque were repeated. RESULTS: The amount of plaque that developed in 19 h was significantly higher in the untreated periodontitis group as compared with the two healthy groups. In case of an inflamed reduced periodontium, sites with deep pockets developed more plaque in 19 h than sites with shallow pockets. The number of bacteria present in the rinsing samples of the two inflamed groups was considerably higher than of the two periodontally healthy groups. A significant correlation was found between the bleeding index at intake and the plaque index at 19 h. No correlations were found between gingival recession and the bacterial counts at intake, and the plaque index at 19 h. CONCLUSION: The present findings support the concept that the periodontal condition is the dominating factor in relation to the rate of plaque formation. The number of bacteria present in the oral cavity as ascertained by means of a rinsing sample does not seem to play a role.     

Primarily Research

Abstract: Composite materials have become an integral part of the wide range of filling materials currently available. Conditioning is necessary to achieve adequate bonding of the composite material to enamel and dentin. Normally, this is done by applying acid preparations to the dental surfaces. These acids have an etching effect that causes surface roughening. The increasing application of lasers in dentistry has introduced another possibility. Laser irradiation can cause roughening of enamel and dentin surfaces. Another interesting alternative is the so-called kinetic cavity preparation technique. This method also results in distinct surface roughening. The purpose of the present study, was to compare the described methods. Tensile bond strength tests and shear bond tests were carried out to examine the adhesion of a composite material to surfaces treated with these methods. Laser irradiation with certain devices and the air-abrasive technique yielded results similar to those with acid etching.     

Mineralization at the interface of implants

Osseointegration of implants is crucial for the long-term success of oral implants. Mineralization of the bone's extracellular matrix as the ultimate step of a mature bone formation is closely related to implant osseointegration. Osteogenesis at oral implants is a complex process, driven by cellular and acellular phenomena. The biological process of the maintenance and emergence of minerals in the vicinity of oral implants is influenced to a great extent by biophysical parameters. Implant-related structural and functional factors, as well as patient-specific factors, govern the features of osteogenesis. To understand the influence of these factors in peri-implant bone mineralization, it is important to consider the basic biological processes. Biological and crystallographic investigations have to be applied to evaluate mineralization at implant surfaces at the different hierarchical levels of analysis. This review gives insight into the complex theme of mineral formation around implants. Special focus is given to new developments in implant design and loading protocols aimed at accelerating osseointegration of dental implants.     

The interleukin-1 polymorphism,smoking, and the risk of periodontal disease in the population-based SHIP study

Several studies have shown a role for interleukin-1 gene cluster polymorphisms in the risk assessment for periodontal diseases. In the Study of Health in Pomerania (SHIP), 3148 subjects were randomly selected from the population and assessed for a broad range of diseases and environmental/behavioral risk factors. From the complete study group in the age 40 to 60 years, N = 1085 subjects were genotyped for the interleukin-1 genotype composite polymorphism in relation to periodontal parameters. The study objective was to elucidate the gene-environment interaction between the risk factors smoking and IL-1 polymorphism. An increased risk of periodontal disease was found for IL-1 genotype-positive smokers: odds ratio adjusted for age, sex, education, and plaque OR = 2.50 (95% C.I. 1.21 to 5.13; p = 0.013). This was not the case with subjects who never smoked: OR = 1.09 (0.73-1.62; p = 0.676). These results support the hypothesis of gene-environmental interaction in periodontitis.     

Comparison of the bleeding on marginal probing index and the Eastman interdental bleeding index as indicators of gingivitis

AIM: The purpose of the present study was to compare 2 indices, i.e., the Eastman interdental bleeding (EIB) index and the bleeding on marginal probing (BOMP) index. The comparison was made (a) in terms of the degree of bleeding provoked and the relationship with plaque in natural gingivitis and (b) for the ability of these 2 methods to detect differences between the development of experimental gingivitis in a control group and a group in which the development of gingival inflammation was suppressed by treatment. For the present studies, subjects were selected without interdental recession of the gingival tissues. METHODS EXPERIMENT 1: In this experiment, 43 subjects having established moderate gingivitis were assessed using a random splitmouth design (1st and 3rd/2nd and 4th quadrant). Plaque was scored on all approximal sites after which the BOMP index was assessed in one half of the mouth and the EIB index in the other. RESULTS EXPERIMENT 1: The BOMP index showed a bleeding score of 84% and the EIB index of 87%. The significant correlation between plaque and gingival bleeding for the BOMP index (0.55) was higher than for the EIB index (0.44). METHODS EXPERIMENT 2: For this experiment, 25 subjects participated in an experimental gingivitis trial of the lower jaw. At baseline, first the BOMP index and immediately thereafter the EIB index were assessed at all approximal sites. Experimental gingivitis (EG) was carried out in one randomly assigned quadrant and as a treatment modality only floss was used in the other (FL). RESULTS EXPERIMENT 2: In the EG quadrant, the BOMP index increased to 69% and the EIB index to 73%. Both indices showed a significant correlation with plaque; 0.60 and 0.64 respectively. In the FL quadrant, the BOMP index increased to 38% and the EIB index to 30%. No significant correlation between both gingivitis indices and the amount of plaque was present in the FL quadrant. CONCLUSION: The ability of the BOMP index and the EIB index to assess the level gingival inflammation appears to be comparable.