再生医学技术在烧伤传统治疗无效病人中的应用(附38例报告)

目的：总结重度烧伤传统疗法无效改为再生医学(MEBT/MEB0)技术治疗变化规律和临床验．方法：将我科l995年5月至2002年5月收治的院外采用传统疗法无效改用MEBT/MEBO技术治疗的38例重度烧伤病人临床资料进行回顾性总结，病人一旦入院创面均改用MEBT/MEBO治疗，初始予以彻底清创，规范用药、规范操作，规范认识；全身实行系统综合治疗措施．以临床观察和病人感觉评价治疗效果。结果：本组38例全部治愈，末植皮自行愈合者21例．占55.26％．深Ⅲ度创面自愿要求植皮者17例，占44.74％。经随访多数无增生性瘢痕，部分愈后有局限性瘢癌，质软无残废。结论：重度烧伤经传统疗法久治不愈或疗效欠佳病人．病情复杂，并发症较多治疗难度也较大，再生医学可有效改善以上缺陷和病症．是重度烧伤病人传统治疗无效时的理想疗法。     

Prognostic role of alveolar-arterial oxygen pressure difference in acute pulmonary embolism.

BACKGROUND: This study investigated the utility of the alveolar - arterial oxygen pressure difference (AaDO (2)) in predicting the short-term prognosis of acute pulmonary embolism (PE). METHODS AND RESULTS: This study retrospectively enrolled 114 consecutive patients with acute PE, diagnosed by either spiral computed tomography or high probability ventilation - perfusion lung scans. During the first 24 h of admission, all patients had initial artery blood gas collected under room air. Patient exclusion criteria were chronic lung disease, septic emboli, and moderate and low probability lung scans. Patients were assigned to 2 groups based on either 30-day death or a 30-day composite event. Receiver operating characteristic analyses was used to determine the AaDO(2) cut-off value for predicting primary and composite endpoints. Statistical analysis demonstrated significant differences in AaDO(2) between the 30-day composite endpoint group and the 30-day composite event-free survival group (p=0.012). The AaDO(2) had a strong trend between the 30-day death group and the survival group (p=0.062). The best cut-off value for AaDO(2) was 53 mmHg and using this, the positive predictive value for 30-day death was 25% and the negative predictive value was 92%. For the 30-day composite endpoint, the positive predictive value for AaDO(2) was 35%, and the negative predictive value was 84%. In this study, thrombocytopenia was also an indicator of poor prognosis for patients with acute PE. CONCLUSION: The AaDO(2) measurement is a highly useful and simple measurement for predicting short-term prognosis in patients with acute PE. It has high negative predictive value and moderate positive predictive value for 30-day death and 30-day composite event. Aggressive thrombolytic treatment strategies should be considered for patients with an initial poor prognostic parameter (ie, AaDO(2) >or=53 mmHg).     

Molecular epidemiology and control of nosocomial methicillin-resistant Staphylococcus aureus infection in a teaching hospital.

BACKGROUND AND PURPOSE: Nosocomial methicillin-resistant Staphylococcus aureus (MRSA) infection is difficult to control. Due to a dramatic increase in the nosocomial MRSA infection rate at our hospital from 2000 to 2001, this study was conducted to identify the source of these infections and the effectiveness of control measures. METHODS: 179 healthcare workers (HCWs) were screened for carriage of MRSA. Starting in April 2001, all patients with MRSA infection or colonization were put in strict contact and cohort isolation. The bacterial isolates of HCW carriers and patients with MRSA infection from April 2001 to September 2001 were subjected to antimicrobial susceptibility testing by disk-diffusion method and molecular typing by pulsed-field gel electrophoresis (PFGE). RESULTS: Fifteen HCWs were found to be carriers of MRSA. They were all given topical mupirocin treatment. After these interventions, the nosocomial MRSA infection rate decreased from 1.23 to 0.53 per 1000 patient-days. All 61 MRSA isolates available for antimicrobial susceptibility testing and molecular typing were multidrug resistant. PFGE study revealed 2 predominant types, type C and type Y, comprising 36 and 12 isolates, respectively. CONCLUSIONS: The current study demonstrates the importance of measures to control nosocomial MRSA infections in hospitals that already have a high incidence of endemic MRSA infection. Elimination of carriage by healthcare workers, and strict contact and cohort isolation are the main effective measures.     

Nasal septum lesions caused by chromium exposure among chromium electroplating workers

A chromium electroplating worker, suffering from epistaxis during work, was found to have nasal septum perforation. To determine the etiology and prevalence of nasal septum lesions, we conducted a survey of seven chromium electroplating factories and examined 79 workers. Forty workers from three aluminum electroplating factories were also enrolled as the reference group. Subjects were thoroughly examined by an otolaryngologist and each of them provided a blood and urine sample. A questionnaire interview regarding symptoms of the upper respiratory tract, past medical history, life style, and work history was also conducted. Air chromium concentrations were measured by taking area samples for 4–6 hours. Based on field observation and chromium measurements, we divided chromium electroplating into three different exposure zones: workers directly dealing with electroplating tanks (n = 31), other process workers (n = 29), and office workers and drivers (n = 19). Among the 79 chromium electroplating workers, there were 16 cases of nasal septum perforation, and 42 with either scar formation or ulceration; 10 chromium electroplating workers developed skin ulcers after performing chrome plating. No workers from aluminum electroplating factories had any nasal septum or skin abnormalities. There was a consistent trend between the degree of chromium exposure and the signs and symptoms related to the nose, throat, and skin. Immediate improvement of occupational hygiene is warranted.     

Formulation of Vaccine Adjuvant Muramyldipeptides (MDP). 1. Characterization of Amorphous and Crystalline Forms of a Muramyldipeptide Analogue

A relatively nonhygroscopic crystalline form of the glycopeptide, N-acetylmuramyl-L--aminobu-tyryl-D-isoglutamine (I), containing approximately one molecule of water was prepared from amorphous material. The crystalline material, consisting of a mixture of the and anomers, exhibited better physical and chemical stability than the lyophilized amorphous material. The /-anomer ratios of I in both the crystalline and the amorphous state were approximately equal but different from that in solution.     

Cell extract-derived differentiation of embryonic stem cells

Various means have been used to encourage the differentiation of embryonic stem cells (ESCs) toward specific lineages, including growth factor administration, genetic modification, and coculture with relevant cells/tissues. Cell extract-based reprogramming has recently been used to derive mature cells from nonrelated phenotypes. In this communication, we tested whether this in vitro reprogramming approach can be used to direct ESC differentiation. Permeabilized murine ESCs exposed to extracts of murine type II pneumocytes showed increased expression of surfactant protein C and its corresponding mRNA, reflecting enhanced differentiation of pneumocytes. Subsequent differentiation to a type I phenotype was demonstrated by expression of aquaporin 5. Pneumocyte formation occurred quicker than with growth factor-induced differentiation. Our findings establish that ESCs can be differentiated in vitro using cellular extracts. This model provides a tool for analysis of the key factors involved in the differentiation of ESCs to type II pneumocytes.     

Self-assembled biomimetic monolayers using phospholipid-containing disulfides

Several phospholipid-based disulfide molecules were synthesized and attached onto the gold-coated silicon wafer using the self-assembling method. The syntheses of these surface-modifying agents were conducted by introducing bromoethylphosphorate (PBr), phosphorylcholine (PC) or phosphorylethanolamine (PE) groups on the terminals of a dialkyl disulfide. After disulfides adsorption onto gold substrate surfaces, the composition, the film thickness, and the conformational order of self-assembled monolayer surfaces were explored and discussed in detail based on reflection-absorption infrared spectroscopy, contact angle measurement, Auger electron spectroscopy, X-ray photoelectron spectroscopy, and so on. The monolayer having the PBr end group could also be converted to a PC surface by treating with trimethylamine. The model functional surfaces of Au-SC11-PC, -PE, -PBr, -OH or corresponding mixed layers were used to mimic biomembrane surfaces. The monolayer having PC groups was found to reduce fibrinogen adsorption as evaluated from protein adsorption experiments using quartz crystal microbalance. It also showed relatively low platelet adherence compare to the glass, PBr and PE surfaces. The cell viability test also revealed that the PC surface displayed lower cytotoxicity than other surfaces.     

Molecular and biochemical mechanisms ofPasteurella haemolyticaleukotoxin-induced cell death

Pasteurella haemolyticaleukotoxin (LKT) is a member of the RTX family of pore-forming toxins that kill bovine immune cells. Several studies have suggested that RTX toxins kill target cells by the induction of apoptosis. In the present study, BL3 bovine leukaemia cells were exposed to LKT and assessed by molecular and flow cytometric techniques that measure different aspects of apoptotic cell death. The intoxicated cells demonstrated morphological, light scatter and Hoechst 33258 staining characteristics consistent with cells undergoing apoptosis. The cells also exhibited internucleosomal DNA fragmentation and poly (ADP-ribose) polymerase (PARP) cleavage, both indicators of apoptosis. LKT-treated cells bound annexin-V-FITC indicating that phosphatidylserine groups were translocated from the inner to the outer leaflet of the cell membrane. The effect of LKT on cells was dose dependent and inhibitable by incubation with anti-LKT monoclonal antibody. Finally, an early step for induction of apoptosis appears to be the binding of LKT to a β2 integrin since pre-incubating cells with anti-β2 integrin antibodies inhibited LKT-induced apoptosis. This study provides new insights into understanding the pathogenesis of bovine pasteurellosis and could lead to the development of both preventative and therapeutic strategies for disease management.