Surface properties of endosseous dental implants after NdYAG and CO2 laser treatment at various energies.

OBJECTIVES: Dental lasers have been used for uncovering submerged implants as well as decontaminating implant surfaces when treating peri-implantitis. The objective of this study was to compare the possible alterations of the smooth surface and resorbable blast material (RBM) surface implants after using NdYAG and CO(2) lasers at various energies. MATERIALS AND METHODS: Ten smooth surface implants and 10 RBM surface implants were used. Two smooth surface implants and 2 RBM surface implants served as a control group that was not lased. The remaining implants were treated using NdYAG and CO(2) lasers. The surface of each implant was treated for 10 seconds on the second and third threads. The smooth surface implants (group 1) were treated using a pulsed contact NdYAG laser at power settings of 1, 2, 3.5, and 5 W, which are commonly used for soft tissue surgery; the corresponding energy and frequency were 50 mJ and 20 Hz, 100 mJ and 20 Hz, 350 mJ and 10 Hz, and 250 mJ and 20 Hz, respectively. The group 2 RBM implants were treated using a pulsed contact NdYAG laser. The group 3 smooth surface implants were treated using a pulsed wave non-contact CO(2) laser at 1, 2, 3.5, and 5 W, and the group 4 RBM implants were treated using a pulsed wave non-contact CO(2) laser. Data were analyzed using scanning electron microscopy. RESULTS: The control surface was very regular and smooth. After NdYAG laser treatment, the implant surface showed alterations of all the surfaces. The amount of damage was proportional to the power. A remarkable finding was the similarity of the lased areas on the smooth and RBM surfaces. CO(2) laser at power settings of 1.0 or 2.0 W did not alter the implant surface, regardless of implant type. At settings of 3.5 and 5 W, there was destruction of the micromachined groove and gas formation. CONCLUSION: This study supports that CO(2) laser treatment appears more useful than NdYAG laser treatment and CO(2) laser does not damage titanium implant surface, which should be of value when uncovering submerged implants and treating peri-implantitis.     

A study of a method for distribution analysis of skin color

Background/aims: The objective and quantitative assessment of the skin is important in medical and cosmeceutical research. Assessment of color is an important element for analyzing the surface of the skin, which is usually determined subjectively by a doctor or using color analysis devices. These devices, however, cannot provide correct color information because color is construed from the mean value of the observation region, and analysis of color distribution is impossible. The purpose of this paper is to develop an objective analysis method to permit skin color measurement of each pixel unit of an image and analyze the distribution of skin surface color. Methods: The Skin Color Distribution Analyzer (SCDA) is an analysis method newly developed at the Research Institute for Skin Image at Korea University. The SCDA system presented in this paper performed a novel form of quantitative and objective analysis of skin color distribution using each pixel color model parameter found in image wavelength information. In this paper, distribution analysis was conducted on normal skin and skin lesions and skin affected by artificially induced irritant contact dermatitis and pigmented nevous. The method selected a grade using a color model parameter. Twenty healthy Korean males participated in this study. A comparative study of the eight anatomical areas was performed, including the exposure and non‐exposure parts and the medial aspect and the lateral aspect of the forearm. A reliability test for the SCDA system was also conducted with a spectrometer (SPEC) using the color analysis method. Results: Each skin lesion was precisely segmented by grade and each parameter hada different statistical significance for results of analysis of distribution in pigmented nevous and the artificially induced irritant contact dermatitis. Parameters L^*, b^*, a^*, and EI showed salient traits. Showed resemble measured result in the SCDA system and the SPEC of normal skin. The exposed site, in comparison with the non‐exposed site, showed a notable difference in the L^* parameter and a significant statistical difference in the x and z parameters, except b^*. The comparison of the medial and lateral aspects of the forearm showed a notable difference in the L^* parameter and a significant statistical difference in the parameters except y and b^*. In the reliability test result using the SCDA system and the SPEC, the SCDA system was highly reliabile in terms of the CV value in all color model parameters. Conclusions: The color distribution analysis method using the SCDA system has revealed an aspect that the existent method of medical research has not shown, and is considered to be more reliable than other methods. This method can provide better study findings because it can be applied to other fields in addition to the medical science field and the ripple effect is thought to be bigger in other science field too.     

Response of lumbar paraspinal muscles spindles is greater to spinal manipulative loading compared with slower loading under length control.

BACKGROUND CONTEXT: Spinal manipulation (SM) is a form of manual therapy used clinically to treat patients with low back and neck pain. The most common form of this maneuver is characterized as a high-velocity (duration <150 ms), low-amplitude (segmental translation <2 mm, rotation <4 degrees , and applied force 220-889 N) impulse thrust (high-velocity, low-amplitude spinal manipulation [HVLA-SM]). Clinical skill in applying an HVLA-SM lies in the practitioner's ability to control the duration and magnitude of the load (ie, the rate of loading), the direction in which the load is applied, and the contact point at which the load is applied. Control over its mechanical delivery is presumably related to its clinical effects. Biomechanical changes evoked by an HVLA-SM are thought to have physiological consequences caused, at least in part, by changes in sensory signaling from paraspinal tissues. PURPOSE: If activation of afferent pathways does contribute to the effects of an HVLA-SM, it seems reasonable to anticipate that neural discharge might increase or decrease in a nonlinear fashion as the thrust duration approaches a threshold value. We hypothesized that the relationship between the duration of an impulsive thrust to a vertebra and paraspinal muscle spindle discharge would be nonlinear with an inflection near the duration of an HVLA-SM delivered clinically (<150 ms). In addition, we anticipated that muscle spindle discharge would be more sensitive to larger amplitude thrusts. STUDY DESIGN/SETTING: A neurophysiological study of spinal manipulation using the lumbar spine of a feline model. METHODS: Impulse thrusts (duration: 12.5, 25, 50, 100, 200, and 400 ms; amplitude 1 or 2 mm posterior to anterior) were applied to the spinous process of the L6 vertebra of deeply anesthetized cats while recording single unit activity from dorsal root filaments of muscle spindle afferents innervating the lumbar paraspinal muscles. A feedback motor was used in displacement control mode to deliver the impulse thrusts. The motor's drive arm was securely attached to the L6 spinous process via a forceps. RESULTS: As thrust duration became shorter, the discharge of the lumbar paraspinal muscle spindles increased in a curvilinear fashion. A concave-up inflection occurred near the 100-ms duration eliciting both a higher frequency discharge compared with the longer durations and a substantially faster rate of change as thrust duration was shortened. This pattern was evident in paraspinal afferents with receptive fields both close and far from the midline. Paradoxically, spindle afferents were almost twice as sensitive to the 1-mm compared with the 2-mm amplitude thrust (6.2 vs. 3.3 spikes/s/mm/s). This latter finding may be related to the small versus large signal range properties of muscle spindles. CONCLUSIONS: The results indicate that the duration and amplitude of a spinal manipulation elicit a pattern of discharge from paraspinal muscle spindles different from slower mechanical inputs. Clinically, these parameters may be important determinants of an HVLA-SM's therapeutic benefit.     

Increased lymphocyte beta-adrenergic receptor density in progressive multiple sclerosis is specific for the CD8+, CD28- suppressor cell.

Beta-adrenergic receptor density on T cells from healthy humans is greatest on suppressor cells (CD8+, CD28-) and the effect of catecholamines, secreted by the sympathetic nervous system, predominates on this subset. The sympathetic skin response, a measure of sympathetic nervous system function, is absent in most patients with chronic progressive multiple sclerosis (MS). We measured beta-adrenergic receptor density on suppressor cells, cytotoxic cells, and monocytes from patients with chronic progressive MS and healthy control subjects. Control receptor density on suppressor cells was 2.8 +/- 0.3 fmol/10(6) cells versus a density of 5.1 +/- 0.7 fmol/10(6) cells for patients. Cytotoxic cell (CD8+, CD28+) receptor density was 1.4 +/- 0.4 fmol/10(6) cells in control subjects and 0.9 +/- 0.3 fmol/10(6) cells in the patients. Monocytes displayed beta-adrenergic receptor densities of 2.6 +/- 0.4 fmol/10(6) cells in normal individuals and 2.7 +/- 0.4 fmol/10(6) cells in the patient group. CD8 lymphocyte beta-adrenergic receptor densities in patients with relapsing-remitting and those with stable MS were not different from control values, yet were significantly less than the values for patients with chronic progressive MS. We find that mononuclear cells from healthy control subjects and patients with chronic progressive MS proliferate in response to 200 units/ml of recombinant human interleukin-2 (IL-2) similarly. However, IL-2 treatment increased beta-adrenergic receptor density on normal mononuclear cells, but failed to increase it on mononuclear cells from patients with chronic progressive MS.(ABSTRACT TRUNCATED AT 250 WORDS)     

Benign symmetrical lipomatosis

Benign symmetrical lipomatosis is an unusual disorder of fat metabolism that results in a characteristic accumulation of adipose tissue around the head and neck. Surgical extirpation is the only known effective therapy. Physical examination does not provide a comprehensive delineation of tumor extent. We present the first reported use of CT scanning to investigate the anatomic limits of BSL and to plan the operative approach.