Influence of tooth clench on the soleus H-reflex

The Hoffmann (H) reflex is elicited by electrical stimulation of a mixed nerve and is used to measure the excitability of the spindle-motoneuron synapse. Recent investigations have indicated a positive correlation between increases in bite force and H-reflex facilitation. However, these investigations did not examine the H-reflex in detail or the possible role of periodontal mechanoreceptors (PMRs) in this facilitation. The current investigation was performed to determine whether PMRs play a role in H-reflex facilitation during tooth clench (TC). The H-reflex was elicited in the soleus muscle of human subjects while bite level was maintained at rest (0 N), 40 N, 80 N and maximal TC. The front teeth that contributed to the (40 N and 80 N) bite force were then locally anaesthetised (LA), and the protocol was repeated. The current data suggest that the effect of TC on the H-reflex amplitude in the human limb muscles is variable from one subject to the next. Statistical analysis has shown that the H-reflex was significantly smaller during the rest condition than during the 80 N bite (p<0.05) in both non-LA and LA conditions. Since LA did not alter the response, our results do not support that the PMRs play a major role in the facilitation of distal muscle activity.     

Welche Aussagekraft haben kephalometrische Messungen am Fernröntgenprofilbild für die rekonstruktive Zahnheilkunde beim Erwachsenen?

Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie - Es wurden 72 Fernröntgenprofilaufnahmen von unbehandelten Probanden im Alter von 18 bis 35 Jahren mit anatomisch...     

Die Retention von Milchzähnen

Zusammenfassung Beobachtungen an einigen kieferorthopädischen Fällen lassen erkennen, daß es bei den Milchzähnen neben dem als Halbretention bekannten scheinbaren Tiefersteigen (infolge Verwachsens zwischen Zement und Knochen) auch Retentionen anderer Art gibt. Es handelt sich dabei 1. um verzögerten Durchbruch einzelner Zähne oder Zahngruppen, 2. um echtes Impaktiertbleiben. Ursachen und histologische Besonderheiten werden besprochen.

---

Summary Observations of some cases in jaw-orthopedics reveal that the deciduous teeth also show other kinds of retentions besides the known half retention — as a result of fusion between cement and bone. First of all it concerns delayed eruption of single deciduous teeth or groups of them, secondly it concerns the fact that they remain actually impacted. Causes and particulars of histology are discussed.

---

Résumé Des observations de quelques cas d'orthopédie dentofaciale révèlent que les dents temporaires montrent d'autres types de rétention à côté de la semi-rétention réenfoncement connu de la dent (dû à la synostose entre le cément et l'os). Il s'agit de retard d'éruption de

---

---

Mit 14 Abbildungen

---

Herrn Professor Dr. R. Bolle zum 65. Geburtstag     

Buchbesprechung

Ohne Zusammenfassung     

Assessment of correlation between computerized tomography values of the bone, and maximum torque and resonance frequency values at dental implant placement

summary The aim of this study was to determine the bone density in the designated implant sites using computerized tomography (CT), the fastening torque values of dental implants, and the implant stability values using resonance frequency analysis. Further aim was to evaluate a possible correlation between bone density, fastening torque and implant stability. Eighty‐five patients were treated with 158 Brånemark System implants. CT machine was used for preoperative evaluation of the jawbone for each patient, and bone densities were recorded in Hounsfield units (HU). The fastening torque values of all implants were recorded with the OsseoCare equipment. Implant stability measurements were performed with the Osstell machine. The average bone density and fastening torque values were 751·4 ± 256 HU and 39·7 ± 7 Ncm for 158 implants. The average primary implant stability was 73·2 ± 6 ISQ for seventy implants. Strong correlations were observed between the bone density, fastening torque and implant stability values of Brånemark System TiUnite MKIII implants at implant placement (P < 0·001). These results strengthen the hypothesis that it may be possible to predict and quantify initial implant stability and bone quality from pre‐surgical CT diagnosis.     

The development of plate osteosynthesis for the treatment of fractures of the mandibular body - a literature review.

PURPOSE: Today plate and screw osteosynthesis of mandibular fractures is a standard procedure in routine clinical practice. In this review, the breakthroughs and drawbacks of the development of this important aspect of maxillofacial surgery are followed-up. METHODS: Medline search of relevant English and German literature. RESULTS: In 1886, Carl Hansmann was the first who applied steel screws and plates. Until today the material, the types of plates and applications have been continually improved. Over the last two decades miniplate osteosynthesis has induced a revolution in mandibular fracture treatment. The modern systems provide better handling, higher stability and less pressure on the bone. CONCLUSION: Modern miniplates have great advantages, like the intra-oral approach and the easy adaptability. In addition, it is no longer necessary to expose bone as extensively.     

Contribution of the periosteum to bone formation in guided bone regeneration. A study in monkeys

The periosteum has been referred to as a protective barrier in the regeneration of bone defects. The objective of this study was to determine the contribution of periosteum as a natural barrier to bone formation in guided bone regeneration. Mucoperiosteal flaps were elevated bilaterally on the buccal aspect of the mandibular angle in 5 cynomolgus monkeys. Bleeding was induced by perforating the cortical bone. A hemispherical titanium mesh was fixed over the areas thus creating a void 5 mm in height between the mesh and the bone surface. One one side the mesh was covered with an ePTFE membrane (test side). The contralateral side did not receive further treatment (control side). After 4 month healing, histomorphometric analyses were used to determine the percentage of new bone in the void underneath the mesh, and the ratio between mineralized tissue and marrow spaces in new and old bone. The mean percentage of new bone tissue was 77.2 +/- 7.5% for the test sides and 68.6 +/- 8.4% for the control sides (P = 0.018, t-test). This new bone contained 80.0 +/- 3.6% mineralized tissue in the test group and 82.5 +/- 5.0% in the control group (P > 0.05, t-test). In both groups the newly formed bone exhibited significantly less mineralized tissue than the old bone (P < 0.05, t-test). It is concluded from this study that new bone formation was enhanced by the additional use of an ePTFE membrane under a periosteum-lined mucoperiosteal flap when space maintenance was excluded as a critical factor.     

Clinical and histologic evaluation of submerged and nonsubmerged hydroxyapatite-coated implants: a preliminary study in dogs

A clinical and histologic study was performed to evaluate the differences in the healing of submerged and nonsubmerged hydroxyapatite-coated 2-piece implants. Three foxhounds were used for this evaluation. Mandibular premolars 1, 2, 3, and 4 were extracted. Three months later, 2 submerged implants were placed on one side of the mandible, and 2 nonsubmerged implants were placed on the other side of the mandible. After 3 months of healing, the submerged implants were exposed, and a third implant was placed on each side of the mandible in a nonsubmerged procedure. Clinical parameters were recorded, the animals were sacrificed 6 months after placement of the first implants, and histologic and histometric analyses were performed. Results of the evaluation of the clinical parameters showed only minor differences among the different treatment groups. Regarding the percentage of bone-to-implant contact of the different treatment groups, the submerged implants showed a bone-to-implant contact of 63.4%, the nonsubmerged implants showed 70.3% contact, and the late nonsubmerged implants demonstrated a bone-to-implant contact of 58.7%. The average distance from the implant neck to the first bone-to-implant contact (fBIC) for submerged implants was 0.58 mm, for nonsubmerged implants it was 1.09 mm, and it was 1.13 mm for late nonsubmerged implants. The vertical distance between the gingival margin and the apical extent of the junctional epithelium (aJE) varied from 1.14 mm to 1.28 mm in the different groups. The distance from the aJE to fBIC was 1.00 mm for the submerged group, 1.08 mm for the nonsubmerged group, and 1.00 mm for the late nonsubmerged group. Generally, it can be concluded that the clinical and the histologic behavior of submerged or nonsubmerged 2-piece implants utilized in this experiment do not differ.     

Influence of fiber-reinforced composites on the resistance to fracture of vertically fractured and reattached fragments

Introduction

The aim of this in vitro study was to evaluate the fracture type and test the effects of 2 different fibers on fracture strength of roots with reattached fragments. The null hypothesis was that adding suitable fibers to the content of dual-cure adhesive resin cement increases the fracture resistance of reattached fragments under vertical forces.

Methods

Root canals of 45 teeth were prepared, and the teeth were intentionally fractured into 2 separate fragments. Control groups (n = 7 each) consisted of unfractured teeth with instrumented and obturated or only instrumented root canals. The fractured teeth were divided into 3 groups (n = 15 each), and separated fragments were reattached by using (1) dual-cured resin cement (Clearfil SA), (2) dual-cured resin cement + polyethylene fiber (Construct), or (3) dual-cured resin cement + glass fiber (Stick-Net). Force was applied at a constant speed of 0.5 mm/min to the root until fracture. Mean load was recorded and analyzed statistically by using Kruskal-Wallis and Dunn tests (P = .05). Fracture types were analyzed by using χ² analysis with Yates correction.

Results

Stick-Net demonstrated the lowest fracture resistance (P < .05), whereas Construct and Clearfil SA had similar fracture strengths (P > .05). The roots in the control group showed the highest fracture resistance. However, there was no statistically significant difference between the Construct, Clearfil SA, and control groups (P > .05).

Conclusions

Separated fragments of vertically fractured teeth can be reattached by using a dual-cured resin or by adding polyethylene fiber (Construct).     

Assessment of the distraction regenerate using three-dimensional quantitative computer tomography

This study presents a new method for objective assessment of the distraction regenerate using three-dimensional quantitative computer tomography (3D-QCT). The distraction specimens of 16 sheep that underwent bifocal cranial distraction osteogenesis to reconstruct a critical size defect were used to evaluate this method. To analyse the validity of this method the results were compared to conventional quantitative computer tomography (QCT). Squared correlation coefficients (r(2)) according to Sackett showed a high reliability (r(2) > 70% for the total DO regenerate, DO Regions 2-4). Method comparison according to Bland-Altman (< or =6.25% of measurements out of 95% limits of agreement) showed that three-dimensional computer tomography based bone densitometry is valid for future DO research.