Esophageal Calibration with Soft Orogasrtric Tube During Laparoscopic Nissen Fundoplication may Reduce Postoperative Transient Dysphagia

Gastroesophageal reflux is the most common benign disorder of the esophagus and laparoscopic Nissen fundoplication has become the standard surgical treatment for its treatment. In our area, where the use of bougie calibration is debatable, postoperative dysphagia is encountered often after this surgery although it is usually not permanent. The aim of this study was to investigate the effect of using a soft silicone tube 39 F in diameter for esophageal calibration during laparoscopic Nissen fundoplication on the incidence of postoperative dysphagia. We divided cases scheduled to undergo laparoscopic Nissen fundoplication between January 2009 and November 2010 into two groups, each consisting 25 patients. Esophageal calibration with a 39 F silicone orogastric tube was used for the first group while there was no operative calibration in the second group. The surgical duration was recorded; the presence and severity of the postoperative dysphagia was calculated by using a dysphagia severity scoring system during the 1-year postoperative follow-up. The dysphagia severity scores were significantly lower in group 1 than group 2 on the postoperative second day and at the end of the first week and first month. We did not find a significant difference at the end of the 6-month and first year. There was also no significant difference regarding surgery duration. The use of a soft orogastric tube 39 F in diameter for esophagus calibration during laparoscopic Nissen fundoplication has significantly decreased the incidence of postoperative transient dysphagia without affecting the duration of surgery. Although dysphagia gradually resolves in the majority of patients, a safe and easy calibration method for its prevention is worth developing, and we believe that the use of our method in larger series could be beneficial.     

Extubación ultra fast-track vs. convencional tras cirugía cardiaca en un centro de referencia cardiovascular en Colombia. Estudio longitudinal

Introduction

The fast track / ultra-fast-track protocols are techniques used to optimise the patient care process and a quick recovery after cardiac surgery. They are one of the mainstays of efficient practice. With their use, the length of hospital and intensive care unit (ICU) stays are reduced, with a direct impact on costs and the quality of the health service.

Efectividad de un nuevo modelo de derivación telefónica compartida entre atención primaria y atención hospitalaria

Aim

The purpose of this study is to find out whether telephone referral from Primary Health Care to Internal Medicine Consult manages to reduce waiting days as compared to traditional referral. This study also aims to know how acceptable is the telephone referral to general practitioners and their patients.

Reticencia vacunal: análisis del discurso de madres y padres con rechazo total o parcial a las vacunas

Objective

To analyse and understand vaccination hesitancy discourses, particularly those of people who have decided not to vaccinate their sons and daughters.

Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.