自体骨髓干细胞移植狗牙周缺损处引导组织再生的实验观察

目的本文对应用自体骨髓干细胞移植引导组织再生的动物实验的观察进行评价。方法6只成年狗,实验组,对照组各18颗牙。分别在每条狗抽取骨髓1ml,在实验室内进行原代骨髓干细胞培养,培养液为内含15%小牛血清(FCS)和0.5%青-链霉素抗生素的a-MEM培养液。第1代细胞转移到18块大小为6×2mm2胶原膜上,约每张胶原膜上1×107个细胞,培养24小时后相差显微镜下观察细胞在膜上附着情况。在人工制造的牙周缺损中进行体外培养的自体骨髓干细胞移植结合GTR方法(实验组)和单纯GTR方法(对照组)。在6周后切片行牙周组织学观察。结果实验组新生牙槽骨新生牙周膜组织及新生牙骨质的修复再生的效果明显好于对照组(P<0.05),形成了的牙周结构,只是引导再生的牙周组织基本恢复到正常的牙周组织高度。实验组牙槽骨再生高度平均为4.50±0.13mm;对照组为3.09±0.28mm。结论应用自体骨髓干细胞移植结合e-pTFE膜引导牙周组织再生可促进牙周组织的再生、加快正常骨结构组织的建立并缩短修复再生时间。     

上颌前牙区种植修复5年临床疗效观察

目的:评估上颌前牙区种植义齿应用5年的临床效果.方法:2002年1月至2006年12月间,行上颌前牙区种植治疗患者234例,共植人种植体354颗.随访7～62个月,观察方法为X线片、临床检查及患者满意度调查.应用SPSS13.0软件包统计分析上颌前牙区种植义齿5年累计存留率(寿命表法),骨吸收情况(方差分析),软组织及美学效果.结果:上颌前牙区种植义齿5年累计存留率为97.9%;不同术式下种植体存留率无显著差异(P=1.00):种植体周垂直骨吸收量各年份相比无显著差异(P=0.88);19.8%的患者牙问乳头达到Jemt分级3分.91.7%患者对种植修复表示满意.结论:上颌前牙区行种植修复是有效的治疗方法.     

腭隐裂患者头颅侧位X线片测量分析

目的　应用回顾性研究的方法对 50例腭隐裂患者X线片测量并与健康对照组对比分析 ,观察软腭在形态学、运动能力以及腭帆提肌附着位置等方面的特点 ,进一步研究腭隐裂患者腭咽闭合不全的原因 ,为其诊断提供依据。方法　腭隐裂患者 50例 (年龄 4～ 51岁 ,平均年龄 1 1 9岁 ,男性 2 0例 ,女性 30例 ,男∶女 =1∶1 5)。对术前头颅侧位定位X线片共 1 0 0张 (每例静止及发“i”音各 1张 )进行测量分析。结果　腭隐裂组的软腭相对长度较对照组短 ,患者的腭帆提肌附着点相对位置比对照组靠前 ,发音时软腭抬高角度较小 ,以上 3项指标经统计学分析 ,差异有显著性 (P <0 0 5)。两组间硬腭相对长度和发音时软腭伸长量的比较差异无显著性 (P >0 0 5)。结论　通过测量所得指标(包括软腭相对长度、腭帆提肌附着位置及发音时软腭抬高角度 )是诊断腭隐裂的重要指标     

全冠边缘材料与位置对人牙周组织的影响

目的 探讨全冠边缘材料和位置对人牙周组织的影响.方法 对需作全冠或双端固定桥修复并符合纳入标准的20例患者的30颗牙,在牙体预备前、全冠或双端固定桥黏固后7～8周,分别记录其颊侧牙龈的菌斑指数(PLI)、牙周探诊深度(PD)、龈沟出血指数(SBI),并测量其龈沟液(GCF)量、龈沟液的天冬氨酸转氨酶活性(AST活性).全冠或固定桥黏固前后分别测量冠边缘间隙.暂时冠和全冠黏固后对患者各行1次口腔健康教育.结果 全冠黏固后7～8周,全冠对应牙龈的PD、 SBI≥2频率、GCF量及AST活性没有明显变化, PLI≥1的频率明显下降.结论 具有良好的口腔卫生习惯、制作精良的全冠黏固后7～8周,金属边缘、烤瓷边缘、平龈冠边缘、龈下冠边缘均不会引起人牙龈的不良反应.     

Mandibular complete denture impressions with fluid wax or polysulfide rubber: A comparative study

Some authors have stated that wax cannot be used to make impressions for complete dentures, while others have found that wax has some advantages over elastomeric impression materials. The purpose of this study was to compare mandibular impressions made with a fluid wax to those made with light-body polysulfide rubber. Fifteen maxillary and mandibular complete dentures were made using fluid wax as a final impression material. For comparison, 15 maxillary and mandibular complete dentures were made using light-body polysulfide rubber. The number of adjustments required over 1 year was recorded. No statistical difference in adjustments was noted between the two groups.     

喙突过长致开口受限的临床观察

目的报道喙突过长引起下颌运动受限、开口困难的病例资料，供临床工作借鉴。方法报道7例喙突过长致开口困难病例的临床、X线表现及治疗方法。结果曲面断层、华特位片可较好的显示突喙突过长，但往往不为临床医师所认识。本资料6例经手术切除过长的喙突后，开口度均恢复正常。结论喙突过长致开口困难较少见，应在开口困难的鉴别中予以注意。     

Prevalence of Nontraditional Dental Hygiene Practice

There is little knowledge of the number or the work characteristics of dental hygienists outside the private-practice setting. This survey was conducted to determine the percentage of hygienists practicing in nontraditional (nonprivate-practice) settings and the types of settings in which they are employed. Mail questionnaires were returned from a total of 21,847 (56.9%) of the hygienists in the survey sample. The percentage of active hygienists practicing in nontraditional settings was 11.8. Dental or dental hygiene schools, and government and nongovernment-supported clinics were the most frequent nontraditional practice settings. State supervision requirements were found to be associated significantly with the prevalence of nontraditional hygiene practice.     

Dimensional Accuracy of 7 Die Materials

PURPOSE: The purpose of this study was to compare the linear dimensional accuracy and the handling characteristics of 7 die materials. MATERIALS AND METHODS: A master die analogous to a complete veneer crown preparation was machined from medical grade stainless steel, and 3 measurements (1: vertical; 2 and 3: horizontal) were made from 3 scribed reference lines. Individual polyvinylsiloxane impressions were made (n = 10) for each of the specimens. The fabricated dies were measured (50x) to the nearest 0.0001 mm. Data were subject to ANOVA/Duncan tests at significance level 0.05 and pairwise comparisons. RESULTS: Type IV resin-impregnated dental stone and copper-plated dies most closely approximated the dimensions of the master die, and were not significantly different from each other in any of the pairwise comparisons. Conventional Types IV and V dental stone dies exhibited setting expansion within the range appropriate for gypsum. Epoxy resin die materials demonstrated shrinkage comparable to the expansion of the Types IV and V dies. Polyurethane dies displayed a combination of linear expansion and shrinkage. Bis-acryl composite resin dies had excessive shrinkage. CONCLUSIONS: Type IV resin-impregnated dental stone and copper-plated dies were more dimensionally accurate than the other die materials tested.     

右下颌支异位甲状腺癌1例报告

颌面部异位甲状腺癌临床罕见，有关报道颌面部异位甲状腺出现癌变常见的部位为下颌下、颏下及舌骨上下，但未见下颌支异位甲状腺癌的报道，作者报告1例右下颌支异位甲状腺癌病例，并对其临床及病理特征进行了讨论。