The effect of mold temperature on castability of CP Ti and Ti–6Al–4V castings into phosphate bonded investment materials

OBJECTIVE: The aim of this study was to evaluate the castability of CP titanium and Ti-6Al-4V alloy castings into Rematitan Plus investment at three different mold temperatures. METHODS: A nylon mesh pattern (20 mm with 64 squares and wire of 0.7 mm in diameter) was used for the castability testing. Initially, an image of the wax pattern was obtained by means of a digital camera and the total extension of filaments (mm) was then measured, using the Leica Qwin image analysis system. The mesh sprued was placed in the Rematitan Plus investment material and the castings were made in a Discovery Plasma machine at three different mold temperatures: 430 degrees C (control group), 480 degrees C or 530 degrees C. Ten castings were made for each temperature. The images of the castings were analyzed (Leica Qwin) and the castability index determined by the number of the completely cast segments as a percentage of the wax pattern. Data were analyzed by two-way ANOVA and Tukey's multiple comparison test (a = 0.05) using materials and temperatures as discriminating variables. RESULTS: The Ti-6Al-4V alloy (60.86%) presented a better castability index than CP Ti (48.44%) (p < 0.000001). For CP Ti, the temperature of 530 degrees C (23.96%) presented better castability than at other temperatures, 480 degrees C (14.66%) and 430 degrees C (12.54%), with no difference between them (p < 0.001). For Ti-6Al-4V alloy, there was a statistically significant difference among the three temperatures: 530 degrees C (28.36%) > 480 degrees C (19.66%) > 430 degrees C (15.97%) (p < 0.002). SIGNIFICANCE: Within the limitations of this study, the increase in the mold temperature of the Rematitan Plus investment resulted in a better castability index for both materials, and Ti-6Al-4V presented a better castability index than CP Ti.     

Association between maternal periodontitis and an increased risk of preeclampsia

BACKGROUND: Periodontal disease has been considered a systemic exposure implicated in a higher risk of adverse pregnancy outcomes. The aim of the present study was to determine whether maternal periodontitis is associated with an increased risk of preeclampsia. METHODS: A case-control study was conducted in a public hospital in Belo Horizonte, Brazil. During the study period, 588 women, aged 14 to 46 years, were deemed eligible and had data available for analysis. Maternal demographic and medical data were collected from medical records. Preeclampsia was defined as blood pressure >140/90 mm Hg and > or =1+ proteinuria after 20 weeks of gestation. A periodontal examination was performed postpartum. Maternal periodontitis was defined as the presence of four or more teeth with one or more sites with a probing depth > or =4 mm and clinical attachment loss > or =3 mm at the same site. The effects of maternal age, chronic hypertension, primiparity, smoking, alcohol use, and number of prenatal visits were analyzed. Adjusted odds ratios (ORs) for preeclampsia were calculated using multivariate logistic regression. RESULTS: The prevalence of periodontitis was 63.9% and preeclampsia was 18.5%. Variables associated with preeclampsia were chronic hypertension (OR = 4.10; 95% confidence interval [CI] = 2.0 to 8.4; P = 0.001), primiparity (OR = 2.40; 95% CI = 1.5 to 3.9; P = 0.004), maternal age (OR = 1.07; 95% CI = 1.0 to 1.1; P = 0.001), and maternal periodontitis (OR = 1.88; 95% CI = 1.1 to 3.0; P = 0.001). CONCLUSION: Maternal periodontitis was determined to be associated with an increased risk of preeclampsia.     

Biocompatibility of resin-based materials used as pulp-capping agents

AIM: To evaluate and compare the response of pulps of rats capped with resin-modified glass-ionomer cement (RMGIC) or self-etching adhesive system. METHODOLOGY: Class I cavities were prepared on the occlusal surface of 54 maxillary first molars of 27 rats. Pulp exposure was performed on the cavity floor. The following resin-based materials were applied as pulp-capping agents: G1, Clearfil Liner Bond 2V (CLB 2V; Kuraray Co., Japan); G2, Vitrebond (VIT; 3M/ESPE, USA). In group 3 (control group), a calcium hydroxide/saline paste (CH; Labsynth, Brazil) was used. The cavities were restored with amalgam. After 7, 30 and 60 days, the animals were sacrificed and the jaws were processed for microscopic evaluation. RESULTS: Despite the inflammatory response caused by the experimental and the control materials at 7 days, pulpal healing associated with calcified barrier formation was observed at 60 days following the pulp therapy. Both resin-based materials promoted a large zone of cell-rich fibrodentine matrix deposition on the pulp horn related to the pulp exposure site, which was larger to VIT than to CLB 2V specimens. Tertiary dentine underneath the fibrodentine matrix was deposited by a layer of elongated pulpal cells. The remaining pulpal tissue exhibited normal histological characteristics. In the control group, healing and dentine-bridge formation was observed at 30 days. Pulpal breakdown occurred only when bacterial infection occurred. CONCLUSION: Both experimental pulp-capping agents allowed pulpal healing characterized by cell-rich fibrodentine and tertiary dentine deposition as well as calcified barrier formation.     

Treatment of gingival fibromatosis associated with Zimmermann-Laband syndrome

BACKGROUND: Gingival fibromatosis is a rare condition characterized by a generalized enlargement of the buccal and lingual aspects of the attached and marginal gingiva. METHODS: This case report describes the periodontal management of a 13-year-old female patient with gingival fibromatosis associated with Zimmermann-Laband syndrome. The patient presented with gingival enlargement involving the maxillary and the mandibular arches, anterior open bite, and non-erupted teeth. Periodontal treatment included gingivectomy in all four quadrants. RESULTS: Histopathologic evaluation of the excised tissue supported the diagnosis of gingival fibromatosis. A significant improvement in esthetic appearance and eruption of the non-erupted teeth were obtained. The patient was referred for appropriate orthodontic treatment and has been closely followed for the earliest signs of recurrence of gingival enlargement. CONCLUSIONS: The successful therapy for gingival fibromatosis depends on correctly identifying the etiological factors and improving the impaired function and esthetic appearance through surgical intervention and adjunctive orthodontics. Maintaining treatment results depends on preservation of periodontal health.     

AIRPOLISHING EFFECT ON BOVINE ENAMEL AND THE POSTERIOR REMINERALIZING EFFECT OF SALIVA. AN IN VITRO STUDY

Purpose:

The aim of the present study was to evaluate the alterations of surface microhardness and wear caused by the sodium bicarbonate jet on bovine enamel and the further remineralizing effect of artificial saliva.

Methods:

Fifteen enamel samples (4,0mm × 4,0mm) were used, which constituted the groups: no treatment (MI); treatment with sodium bicarbonate jet (MII and DI); treatment with sodium bicarbonate jet and immersion in saliva for one hour (MIII and DII), 24 hours (MIV and DIII) and 7 days (MV and DIV). Microhardness tests were carried out using a microdurometer in groups M and wear tests by a rugosimeter in groups D. The data were assessed by the one criterion variance analysis and Tukey test.

Results:

The mean value of microhardness, in KHN, in groups MI, MII, MIII, MIV and MV were 359,80; 335,46; 369,20; 377,73 and 341,86, respectively, whereas the mean values in μm, of wear for group DI, DII, DIII and DIV were 0,564; 0,519; 0,441 and 0,428, respectively.

Conclusions:

The sodium bicarbonate jet caused a wear and a reduction in microhardness on the enamel surface; saliva promoted the recovery of initial condition surface microhardness and reduced the wear; the repairing effect of saliva on the surface microhardness alterations occurred within one hour of treatment, having no significant statistical difference from the effect obtained in 24 hours; the best saliva repairing effect on the wear occurred with treatment of 24 hours.     

Intracanal reinforcement fiber in pediatric dentistry: a case report.

A technique for the restoration of carious primary maxillary incisors using indirect resin composite crowns and intracanal reinforcement fiber is described. Endodontic treatment was previously performed on each tooth. The advantages of using an intracanal reinforcement fiber include resin composite crown reinforcement, translucency, and relative manipulation facility. In addition, the use of indirect resin composite crowns provides good shape and esthetics, as well as reduced chair time for the child. The technique is illustrated in a case report in which indirect resin composite crowns and an intracanal reinforcement fiber are placed in a 3-year-old girl.     

Apical leakage in root canal fillings performed with two types of cement following application of Nd: YAG laser or EDTA solution in the root canal walls

Marginal apical leakage was evaluated in root canal filling performed with two sorts of cements after applying Nd:YAG laser or an EDTA solution in the root canal walls. Sixty-two human lower premolars had their canals instrumented through mechanical technique. Afterwards the external root surfaces were impermeabilized, except for the foramen. The roots were then divided into 4 groups of 15, according to the type of treatment performed on the root canal walls and the type of cement utilized in the filling. Group I - application of Nd:YAG laser and filling with AH Plus cement; Group II - application of Nd:YAG laser and filling with Endofill cement; Group III - application of EDTA for 5 minutes and filling with AH Plus cement; Group IV - application of EDTA for 5 minutes and filling with Endofill cement. Two teeth served as negative and positive controls. Afterwards, the roots were immersed in a 2%-methylene blue dye, for 48 hours. Wearing of the roots took place following the removal of impermeabilization for the reading of leakage magnitude, by means of a light microscope through planimetry technique The results indicated AH Plus cement as the one to allow the least apical leakage, as well as Nd:YAG laser application, when utilized in the treatment of root canal walls, prior to filling.