Automated measurement of 224Ra and 226Ra in water.

We present a new simple approach for automated, non-destructive measurement of the alpha-emitting radium isotopes ((223)Ra, (224)Ra, and (226)Ra) in water based on the emanation of their respective radon daughters ((219)Rn, (220)Rn, and (222)Rn). The method combines the high adsorption uptake of MnO(2) Resin for radium (K(d)=2.4 x 10(4)ml/g) over a wide pH range with the simplicity of the activity registration using a commercial radon-in-air analyzer (RAD7, DURRIDGE Company, Inc). Radium is first adsorbed onto the MnO(2) Resin by passing a water sample through the resin packed in a gas-tight glass cartridge. The same cartridge is then connected to the radon analyzer via a simple tubing system to circulate air through the resin and a drying system. The efficiency of the proposed system is determined by running standards prepared in the same manner. Our results indicate that the efficiency for (226)Ra is >22% if both (218)Po and (214)Po counts are collected. This is comparable with typical efficiencies for alpha spectrometry but with much less sample preparation. We estimate that an MDA of 0.8 pCi/L for (226)Ra may be obtained with this new approach using a 1L water sample and less than 4h of counting.     

Learning to Observe Relationships and Coping

Milieu relationships provide the critical background presence to staff's attempts to motivate, regulate, and teach patients how to cope with stress. Forging a connection with hospitalized children and adolescents demands attention to how they respond to adults and engage with staff around milieu expectations. Assessment guides that deal with these issues are presented. Important aspects of children's relatedness are presented in the context of their working models of adults and the influence of these representations on their response to staff. Coping skills are explained with particular emphasis on behavioral coping strategies. Tied to the assessment process are interventions that emphasize staff's role in helping patients manage strong affects and avoid the use of nonproductive behavior regulation strategies.     

Tendon Graft—Ulna Fixation in Distal Radio-Ulnar Joint Stabilisation; Biomechanical Comparison of Three Graft-Bone Fixation Methods

A common distal radio-ulnar joint (DRUJ) stabilisation procedure uses a tendon graft running from the lip of the radial sigmoid notch to the ulnar fovea and through a bony tunnel to the ulnar shaft, before being wrapped round the distal ulna and sutured to itself. Such graft fixation can be challenging and requires a considerable tendon length. The graft length could be reduced by fixing the graft to the ulna using a bone anchor or interference screw. The aim of this study was to compare the strength of three distal ulna graft fixation methods (tendon wrapping and suturing, bone anchor and interference screw). Four human cadaveric ulnae were used. A tendon strip was run through a tunnel in the distal ulna and secured by: (1) wrapping round the shaft and suturing it to itself, (2) a bone anchor and (3) an interference screw in the bone tunnel. Load to failure was determined using a custom-made apparatus and an Instron machine. Maximum failure load was highest for the bone anchor fixation (99.3 ± 23.7 N) followed by the suturing (96.2 ± 12.1 N), and the interference screw fixation (46.9 ± 5.6 N). There was no significant difference between the tendon suturing and bone anchor methods, but the tendon suturing was statistically significantly higher compared to the interference screw (P = 0.028). In performing anatomical stabilisation of the DRUJ fixation of the tendon graft to the distal ulna with a bone anchor provides the most secure fixation. This may make the stabilisation technique less demanding and require a smaller tendon graft.     

Experimentelle Untersuchungen über den localen Einfluss des Chlornatriums auf die Magensaftsecretion

Ohne Zusammenfassung