Optimization-Based Economical Flexural Design of Singly Reinforced Concrete Beams: A Parametric Study

In the past, many studies have been conducted on the optimization of reinforced concrete (RC) structures. These studies have demonstrated the effectiveness of different optimization techniques to obtain an economical design. However, the use of optimization techniques to an obtain economical design is not so practical due to the difficulty in applying most of the optimization techniques to achieve an optimal solution. The RC beam is one of the most common structural elements encountered by a practising design engineer. The current study is designed to highlight the potential of the Solver tool in MS Excel as an easy-to-use option for optimizing the design of simply supported RC beams. A user-friendly interface was developed in a spreadsheet in which beam design parameters from a typical design can be entered and an economical design can be obtained using the Evolutionary Algorithm available in the MS Excel Solver tool. To demonstrate the effectiveness of the developed optimization tool, three examples obtained from the literature have been optimized. The results showed that up to 24% economical solution can be obtained by keeping the same material strengths that were assumed in the original design. However, if material strength is also considered as a variable, up to 44% of the economical solution can be obtained. A parametric study was also conducted to investigate the effect of different design variables on the economical design of simply supported RC beams and to derive useful rules of thumb for their design and proportioning, with the objective of cost minimization. The results of the parametric study suggest that the grade of the reinforcing steel is one of the most influential factors that affect the cost of simply supported RC beams. Practicing engineers can use the trends derived from this research to further refine their optimal designs.     

Controlling the Wettability of ZnO Thin Films by Spray Pyrolysis for Photocatalytic Applications

Herein, we synthesized the zinc oxide (ZnO) thin films (TFs) deposited on glass substrates via spray pyrolysis (SP) to prepare self-cleaning glass. Various process parameters were used to optimize photocatalytic performance. Substrates were coated at room temperature (RT) and 250 °C with a 1 mL or 2 mL ZnO solution while maintaining a distance from the spray gun to the substrate of 20 cm or 30 cm. Several characterization techniques, i.e., XRD, SEM, AFM, and UV–Vis were used to determine the structural, morphological, and optical characteristics of the prepared samples. The wettability of the samples was evaluated using contact angle measurements. As ZnO is hydrophilic in nature, the RT deposited samples showed a hydrophilic character, whereas the ZnO TFs deposited at 250 °C demonstrated a hydrophobic character. The XRD results showed a higher degree of crystallinity for samples deposited on heated substrates. Because of this higher crystallinity, the surface energy decreased, and the contact angle increased. Moreover, by using 2 mL solution, better surface coverage and roughness were obtained for the ZnO TFs. However, by exploiting the distance of the spray to the samples size distribution and surface coverage can be controlled, the samples deposited at 30 mL showed a uniform particle size distribution from 30–40 nm. In addition, the photoactivity of the samples was tested by the degradation of rhodamine B dye. Substrates prepared with a 2 mL solution sprayed at 20 cm showed higher dye degradation than other samples, which can play a vital role in self-cleaning. Hence, by changing the said parameters, the ZnO thin film properties on glass substrates were optimized for self-cleaning diversity.     

Safety and effectiveness of single- versus double-anastomosis duodenal switch at a single institution

Background

Biliopancreatic diversion with duodenal switch (DS) is known to be superior in weight loss to other bariatric procedures, but with the disadvantage of increased complication rates. Single-anastomosis duodenal-ileal bypass (SADI-S) is reported to have similar weight loss with lower complication rates compared with traditional DS.

Single-Incision Laparoscopic Cholecystectomy Versus Conventional Laparoscopic Cholecystectomy: Meta-analysis and Systematic Review of Randomized Controlled Trials

Background

The objective of this study was to analyze systematically the randomized, controlled trials that compared single-incision laparoscopic cholecystectomy (SILC) and conventional laparoscopic cholecystectomy (CLC).

Methods

The meta-analysis was conducted according to the Quality of Reporting of Meta-analysis (QUORUM) standards. The included studies were analyzed systematically using the statistical software package RevMan. The summated outcomes were expressed as the risk ratios (RR) for dichotomous variables and standardized mean differences (SMD) for continuous variables.

Results

Eleven randomized trials encompassing 858 patients were retrieved from the electronic databases. In the random effects model, postoperative pain, postoperative complications, length of hospital stay, cosmesis score, conversion rate, and time to return to normal activities were statistically comparable between the two cholecystectomy techniques. SILC was associated with a longer operating time [SMD 0.71; 95?% confidence interval (CI) 0.38, 1.05; z?=?4.18; p?<?0.0001) and an increased requirement for additional port insertion (RR 6.54; 95?% CI 2.19, 19.57; z?=?3.36; p?<?0008). However, there was significant heterogeneity among the trials.

Conclusions

SILC does not offer any advantage over CLC for treating benign gallbladder disorders. CLC may be used assiduously for this purpose.     

Evaluating the swelling,erosion, and compaction properties of cellulose ethers

Swelling, erosion, deformation, and consolidation properties can affect the performance of cellulose ethers, the most commonly used matrix former in hydrophilic sustained tablet formulations. The present study was designed to comparatively evaluate the swelling, erosion, compression, compaction, and relaxation properties of the cellulose ethers in a comprehensive study using standardised conditions. The interrelationship between various compressional models and the inherent deformation and consolidation properties of the polymers on the derived swelling and erosion parameters are consolidated. The impact of swelling (K_w) on erosion rates (K_E) and the inter-relationship between Heckel and Kawakita plasticity constants was also investigated. It is evident from the findings that the increases in both substitution and polymer chain length led to higher K_w, but a lower K_E; this was also true for all particle size fractions regardless of polymer grade. Smaller particle size and high substitution levels tend to increase the relative density of the matrix but reduce porosity, yield pressure (P_y), Kawakita plasticity parameter (b^?1) and elastic relaxation. Both K_W versus K_E (R²?=?0.949–0.980) and P_y versus. b^?1 correlations (R²?=?0.820–0.934) were reasonably linear with regards to increasing hydroxypropyl substitution and molecular size. Hence, it can be concluded that the combined knowledge of swelling and erosion kinetics in tandem with the in- and out-of-die compression findings can be used to select a specific polymer grade and further to develop and optimize formulations for oral controlled drug delivery applications.     

Blood-Brain Barrier Permeability of Asiaticoside,Madecassoside and Asiatic Acid in Porcine Brain Endothelial Cell Model

Neurotherapeutic potentials of Centella asiatica and its reputation to boost memory, prevent cognitive deficits and improve brain functions are widely acknowledged. The plant's bioactive compounds, i.e. asiaticoside, madecassoside and asiatic acid were reported to have central nervous system (CNS) actions, particularly in protecting the brain against neurodegenerative disorders. Hence, it is important for these compounds to cross the blood-brain barrier (BBB) to be clinically effective therapeutics. This study aimed to explore the capability of asiaticoside, madecassoside and asiatic acid to cross the BBB using in vitro BBB model from primary porcine brain endothelial cells (PBECs). Our findings showed that asiaticoside, madecassoside and asiatic acid are highly BBB permeable with apparent permeability (P_app) of 70.61 ± 6.60, 53.31 ± 12.55 and 50.94 ± 10.91 × 10^?6 cm/s respectively. No evidence of cytotoxicity and tight junction disruption of the PBECs were observed in the presence of these compounds. Asiatic acid showed cytoprotective effect towards the PBECs against oxidative stress. This study reported for the first time that Centella asiatica compounds demonstrated high capability to cross the BBB, comparable to central nervous system drugs, and therefore warrant further development as therapeutics for the treatment of neurodegenerative diseases.     

Traumatic lumbar visceral herniation in a young woman

INTRODUCTIONLumbar herniation is uncommon, with traumatic etiology being rare. Traumatic lumbar hernias are usually caused by seatbelt injury in motor vehicle accidents. It is exceedingly uncommon to see lumbar hernias in an unrestrained passenger of a motor vehicle accident.PRESENTATION OF CASEWe present a case of a traumatic inferior lumbar hernia in a young woman who was an unrestrained driver of a vehicle involved in a high-speed collision, with multiple rollover and ejection. CT scans of the abdomen and pelvis suggested soft tissue injury involving muscles in the left lower posterior flank with traumatic herniation of the colon and small bowel. Emergent midline abdominal laparotomy confirmed herniation in the left lower quadrant. After abdominal closure, in the prone position, an extensive laceration over the left flank also confirmed herniation. Due to its dirty nature, the wound was irrigated, lavaged and covered with wound vacuum-assisted closure placement. The decision was made in favor of delayed elective hernia repair.DISCUSSIONLumbar hernias are usually caused by sudden force to the abdomen, leading to increased intra-abdominal pressure. This pressure combined with areas of weakness in the superior and/or inferior triangle lead to herniation. Uncommonly, the contents of lumbar hernias can strangulate or incarcerate leading to bowel obstruction. This can often be prevented by detection with CT and laparotomy.CONCLUSIONLumbar herniation of traumatic etiology is rare. Early detection with CT and/or exploratory laparotomy is important to avoid increases in size of the defect and bowel strangulation and incarceration.     

A novel audio forensic data-set for digital multimedia forensics

Today, digital multimedia (audio, video, images) is a common evidential source in litigation and criminal justice proceedings, and, not surprisingly, multimedia forensics is an active research area. One particular challenge faced by multimedia forensic researchers is the lack of a comprehensive and publicly available data-set for evaluating existing and new algorithms. This paper presents a digital audio forensic data-set, designed to facilitate evaluation of audio forensic algorithms (e.g. microphone identification, acoustic environment identification and splice detection). This paper also briefly describes the data-collection settings, microphones, speakers, languages and notations used. Existing tamper-detection techniques rely on artefacts due to recording devices, codec and/or the acoustic environment in the audio in question. Experimental results show that the selected approaches achieved promising results.