Preparation and optimization of activated nano-carbon production using physical activation by water steam from agricultural wastes

Production of activated nano-carbon from agricultural wastes was studied in this work. To obtain the optimum production conditions by a physical activation method, influence of temperature (850, 900, 950 and 1000 °C), activation residence time (30, 60 and 90 min), and mill rotation (200, 300 and 400 rpm) were investigated using three different raw materials including walnut, almond and pistachio shells. To prepare activated nano-carbon, all the samples were heated up to the final activation temperature under a continuous steam flow of 130 cm³ min⁻¹, and at a heating rate of 3 °C min⁻¹, and were held at the different activation temperatures for 30, 60 and 90 minutes. BET surface area of the obtained activated carbons was measured from nitrogen adsorption data in the relative pressure range between 0 to 1. Activated nano-carbon standard indexes were evaluated according to the ASTM standard and the samples were compared. First, the cellulose raw material was heated in the carbonization furnace at 600 °C and then activated in the advanced activation furnace at a temperature between 850 to 1000 °C for 30, 60 and 90 minutes with water vapor. Ash percentage, iodine content, moisture content, specific area, elemental analysis, and FESEM were used for product characterization. The results of the analysis showed that by using the water vapor physical activation method and optimizing the parameters of this process including time and rotation of the mill up to 10 min and 400 rpm, resulted in a significant increase in specific surface area, cavity volume and the iodine number of the final product.

Production of activated nano-carbon from agricultural wastes was studied in this work.     

A simple hydrothermal route for the preparation of novel Na–Y–W nano-oxides and their application in dye degradation

The fabricated NaY(WO₄)₂ was identified through diverse analysis methods. Therefore, to optimize NaY(WO₄)₂ morphology, saccharide carbohydrates were manipulated as a capping agent. In this study, glucose, fructose, lactose, cellulose, and starch were utilized as the capping agents. SEM images show that fructose was the optimal capping agent for achieving uniform and well-shaped nanoparticles. The photodegradation of organic dyes such as M.O and Rd.B by NaY(WO₄)₂ was evaluated under UV and Vis light. The bandgap energy of the as-prepared sample was measured by the Tauc plot, and was found to be nearly 3.85 eV. To study the photocatalytic characteristics, the influence of dye dosage and reusability on photodegradation behavior were investigated.

NaY(WO₄)₂ nanoparticles were fabricated via a simple hydrothermal method using saccharide carbohydrates as capping agents. The photocatalytic behavior of the as-prepared NaY(WO₄)₂ nanostructures was studied.     

Axillary lymph‐node metastases as the primary presentation of high‐grade serous ovarian carcinoma: A case report

We reported a female presented with an initial diagnosis of metastatic axillary lymph‐node carcinoma that comprehensive assessments revealed a definitive diagnosis of high‐grade serous ovarian carcinoma as the primary tumor.     

Spatiotemporal analysis,hotspot mapping,and clustering of confirmed cases of COVID-19 in the initial phase of the pandemic in Qom province,Iran

Objective: To identify the incidence rate, relative risk, hotspot regions and incidence trend of COVID-19 in Qom province, northwest part of Iran in the first s...     

Effect of COVID-19 on the Number of CT-scans and MRI Services of Public Hospitals in Iran: An Interrupted Time Series Analysis

BackgroundIn February 2020, the Ministry of Health and Medical Education in Iran announced the first case of COVID-19. The aim of this study was to investigate the impact of COVID-19 on the number of CT-Scans and MRI services in public hospitals in western Iran.MethodsWe collected CT-scans and MRI services data from 18 public hospitals via Vice-Chancellor Office, Lorestan University of Medical Sciences from January 2017 to February 2021. Interrupted time series analysis (ITSA) was conducted to assess the impact of COVID-19 on CT-Scans and MRI services. More specifically, ITSA was conducted using ordinary least squares regression with the number of CT-Scans and MRI services per 1,000 registered persons per month as dependent variable.ResultsAt the beginning of the observation period, the monthly rate of CT-Scans was constant (p for trend = 0.267) at 291.9 (from 95%CI 240.5 to 343.4) per 1,000 registered patients. The first case of COVID-19 coincided with an abrupt increase by 211.8 (from 95%CI 102.9 to 320.7) per 1,000 patients. Thereafter, the trend of CT-Scans did not change (p=0.576) compared to the pre-pandemic period. The rate of MRI services was 363.5 per 1,000 per registered patients per month (P = <0.0001) with a slightly decreasing trend (coefficient=-5; 95%CI, -6.9 to -3.1).ConclusionThe findings of this study showed that crises such as COVID-19 can affect the service delivery process. Health policymakers and decision makers should work to prevent potential reductions in health care during events such as COVID-19.     

Toxicity of Nd2WO6 nanoparticles to the microalga Dunaliella salina: synthesis of nanoparticles and investigation of their impact on microalgae

The presence of nanoparticles in the environment and their impact on existing organisms is one of the main concerns of researchers working in this field. In this research, Nd₂WO₆ nanoparticles were prepared by an ultrasonic procedure for the first time. X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and energy-dispersive X-ray spectroscopy (EDS) analyses were applied to identify and prove the purity of these particles. In addition to increasing the reaction rate and efficiency with the help of a radical generation mechanism, ultrasound was able to aid the synthesis of these particles. After confirming nanoparticle formation, the optimal nanoparticles in view of scale and morphology were selected by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Optimal particles at three concentrations (25, 50, and 100 ppm) were mixed into the algae growth medium to investigate the effects of the nanoparticles on Dunaliella salina growth. Biological parameters, including the number of cells, biomass, specific growth rate, pigments, and malondialdehyde (MDA), were measured after ten days. Growth parameters showed an increasing trend in concentrations up to 50 ppm; however, at a concentration of 100 ppm, a significant decrease was observed in contrast to the nanoparticles-free treatment. The MDA content showed a linear relationship with enhanced concentration of the nanoparticles. The examination of biological parameters showed that the algae response to stress was dependent on the concentration of nanoparticles. The results showed that 50 ppm of nanoparticles are suitable for increasing algae and achieving a suitable growth rate for commercial purposes. However, in higher concentrations, algal growth inhibition occurs, which is of great importance from a biotechnological point of view.

In this work, Nd₂WO₆ nanoparticles were synthesized by the ultrasonic method for the first time. Also, for the first time, the impact of these nanoparticles on the environment was investigated.     

Neural coding of action in three dimensions: Task- and time-invariant reference frames for visuospatial and motor-related activity in parietal area V6A

Goal-directed movements involve a series of neural computations that compare the sensory representations of goal location and effector position, and transform these into motor commands. Neurons in posterior parietal cortex (PPC) control several effectors (e.g., eye, hand, foot) and encode goal location in a variety of spatial coordinate systems, including those anchored to gaze direction, and to the positions of the head, shoulder, or hand. However, there is little evidence on whether reference frames depend also on the effector and/or type of motor response. We addressed this issue in macaque PPC area V6A, where previous reports using a fixate-to-reach in depth task, from different starting arm positions, indicated that most units use mixed body/hand-centered coordinates. Here, we applied singular value decomposition and gradient analyses to characterize the reference frames in V6A while the animals, instead of arm reaching, performed a nonspatial motor response (hand lift). We found that most neurons used mixed body/hand coordinates, instead of “pure” body-, or hand-centered coordinates. During the task progress the effect of hand position on activity became stronger compared to target location. Activity consistent with body-centered coding was present only in a subset of neurons active early in the task. Applying the same analyses to a population of V6A neurons recorded during the fixate-to-reach task yielded similar results. These findings suggest that V6A neurons use consistent reference frames between spatial and nonspatial motor responses, a functional property that may allow the integration of spatial awareness and movement control.