Selexipag: an oral, selective prostacyclin receptor agonist for the treatment of pulmonary arterial hypertension

In this phase 2 proof-of-concept study we examined the safety and efficacy of selexipag, an orally available, selective prostacyclin receptor (IP receptor) agonist, as a treatment for pulmonary arterial hypertension (PAH). 43 adult patients with symptomatic PAH (receiving stable endothelin receptor antagonist and/or a phosphodiesterase type-5 inhibitor therapy) were randomised three to one to receive either selexipag or placebo. Dosage was up-titrated in 200-μg increments from 200 μg twice daily on day 1 to the maximum tolerated dose by day 35 (maximum allowed dose of 800 μg twice daily). Change in pulmonary vascular resistance at week 17 expressed as a percentage of the baseline value was the primary efficacy end-point, and was analysed in the per protocol set first and then in the all-treated set to assess robustness of results. A statistically significant 30.3% reduction in geometric mean pulmonary vascular resistance was observed after 17 weeks' treatment with selexipag compared with placebo (95% confidence limits -44.7- -12.2; p=0.0045, Wilcoxon rank sum test). This was supported by a similar result from the all-treated set. Selexipag was well tolerated with a safety profile in line with the expected pharmacological effect. Our results encourage the further investigation of selexipag for the treatment of PAH.     

The influence of structural gradients in large pore organosilica materials on the capabilities for hosting cellular communities

Cells exist in the so-called extracellular matrix (ECM) in their native state, and numerous future applications require reliable and potent ECM-mimics. A perspective, which goes beyond ECM emulation, is the design of a host-material with features which are not accessible in the biological portfolio. Such a feature would, for instance, be the creation of a structural or chemical gradient, and to explore how this special property influences the biological processes. First, we wanted to test if macroporous organosilica materials with appropriate surface modification can act as a host for the implementation of human cells like HeLa or LUHMES. It was possible to use a commercially available polymeric foam as a scaffold and coat it with a thiophenol-containing organosilica layer, followed by biofunctionalization with biotin using click chemistry and the subsequent coupling of streptavidin–fibronectin to it. More importantly, deformation of the scaffold allowed the generation of a permanent structural gradient. In this work, we show that the structural gradient has a tremendous influence on the capability of the described material for the accommodation of living cells. The introduction of a bi-directional gradient enabled the establishment of a cellular community comprising different cell types in spatially distinct regions of the material. An interesting perspective is to study communication between cell types or to create cellular communities, which can never exist in a natural environment.

Chemical and structural gradients in biofunctionalized organosilica–polymer nanocomposites control cell adhesion properties and open perspectives for artificial cellular community systems.     

Cement-augmented anterior screw fixation of Type II odontoid fractures in elderly patients with osteoporosis

Background contextClosed reduction and internal fixation by an anterior approach is an established option for operative treatment of displaced Type II odontoid fractures. In elderly patients, however, inadequate screw purchase in osteoporotic bone can result in severe procedure-related complications.PurposeTo improve the stability of odontoid fracture screw fixation in the elderly using a new technique that includes injection of polymethylmethacrylat (PMMA) cement into the C2 body.Study designRetrospective review of hospital and outpatient records as well as radiographs of elderly patients treated in a university hospital department of orthopedic surgery.Patient sampleTwenty-four elderly patients (8 males and 16 females; mean age, 81 years; range, 62–98 years) with Type II fractures of the dens.Outcome measuresComplications, cement leakage (symptomatic/asymptomatic), operation time, loss of reduction, pseudarthrosis and revision surgery, patient complaints, return to normal activities, and signs of neurologic complications were all documented.MethodsAfter closed reduction and anterior approach to the inferior border of C2, a guide wire is advanced to the tip of the odontoid under biplanar fluoroscopic control. Before the insertion of one cannulated, self-drilling, short thread screws, a 12 gauge Yamshidi cannula is inserted from anterior and 1 to 3 mL of high-viscosity PMMA cement is injected into the anteroinferior portion of the C2 body. During polymerization of the cement, the screws are further inserted using a lag-screw compression technique. The cervical spine then is immobilized with a soft collar for 8 weeks postoperatively.ResultsAnatomical reduction of the dens was achieved in all 24 patients. Mean operative time was 64 minutes (40–90 minutes). Early loss of reduction occurred in three patients, but revision surgery was indicated in only one patient 2 days after primary surgery. One patient died within the first eight postoperative weeks, one within 3 months after surgery. In five patients, asymptomatic cement leakage was observed (into the C1–C2 joint in three patients, into the fracture in two). Conventional radiologic follow-up at 2 and 6 months confirmed anatomical healing in 16 of the19 patients with complete follow-up. In two patients, the fractures healed in slight dorsal angulation; one patient developed a asymptomatic pseudarthrosis. All patients were able to resume their pretrauma level of activity.ConclusionsCement augmentation of the screw in Type II odontoid fractures in elderly patients is technically feasible in a clinical setting with a low complication rate. This technique may improve screw purchase, especially in the osteoporotic C2 body.     

Novel organ‐slice culturing system to simulate meniscal repair: Proof of concept using a synovium‐based pool of meniscoprogenitor cells

Meniscal injuries can occur secondary to trauma or be instigated by the changes in knee‐joint function that are associated with aging, osteo‐ and rheumatoid arthritis, disturbances in gait, and obesity. Sixty percent of persons over 50 years of age manifest signs of meniscal pathology. The surgical and arthroscopic measures that are currently implemented to treat meniscal deficiencies bring only transient relief from pain and effect but a temporary improvement in joint function. Although tissue‐engineering‐based approaches to meniscal repair are now being pursued, an appropriate in‐vitro model has not been conceived. The aim of this study was to develop an organ‐slice culturing system to simulate the repair of human meniscal lesions in vitro. The model consists of a ring of bovine meniscus enclosing a chamber that represents the defect and reproduces its sequestered physiological microenvironment. The defect, which is closed with a porous membrane, is filled with fragments of synovial tissue, as a source of meniscoprogenitor cells, and a fibrin‐embedded, calcium‐phosphate‐entrapped depot of the meniscogenic agents BMP‐2 and TGF‐β1. After culturing for 2 to 6 weeks, the constructs were evaluated histochemically and histomorphometrically, as well as immunohistochemically, for the apoptotic marker caspase 3 and collagen types I and II. Under the defined conditions, the fragments of synovium underwent differentiation into meniscal tissue, which bonded with the parent meniscal wall. Both the parent and the neoformed meniscal tissue survived the duration of the culturing period without significant cell losses. The concept on which the in‐vitro system is based was thus validated. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1588–1596, 2016.     

Multicenter prospective randomized study comparing the technique of using a bovine pericardium biological prosthesis reinforcement in parietal herniorrhaphy (Tutomesh TUTOGEN) with simple parietal herniorrhaphy,in a potentially contaminated setting

The use of parietal synthetic prosthetic reinforcement material in potentially contaminated settings is not recommended, as there is a risk that the prosthesis may become infected. Thus, simple parietal herniorrhaphy, is the conventional treatment, even though there is a significant risk that the hernia may recur. Using new biomaterials of animal origin presently appears to offer a new therapeutic solution, but their effectiveness has yet to be demonstrated. The purpose of this multicenter prospective randomized single‐blind study was to compare the surgical treatment of inguinal hernia or abdominal incisional hernia by simple parietal herniorrhaphy without prosthetic reinforcement (Group A), with Tutomesh TUTOGEN biological prosthesis reinforcement parietal herniorrhaphy (Group B), in a potentially contaminated setting. We examined early postoperative complications in the first month after the operation, performed an assessment after one year of survival without recurrence and analyzed the quality of life and pain of the patients (using SF‐12 health status questionnaire and Visual Analog Pain Scale) at 1, 6, and 12 months, together with an economic impact study. Hundred and thirty four patients were enrolled between January 2009 and October 2010 in 20 French hospitals. The groups were comparable with respect to their enrollment characteristics, their history, types of operative indications and procedures carried out. At one month post‐op, the rate of infectious complications (n(A) = 11(18.33%) vs. n(B) = 12(19.05%), p = 0.919) was not significantly different between the two groups. The assessment after one year of survival without recurrence revealed that survival was significantly greater in Group B (Group A recurrence: 10, Group B: 3; p = 0.0475). No difference in the patients' quality of life was demonstrated at 1, 6, or 12 months. However, at the 1 month follow‐up, the “perceived health” rating seemed better in the group with Tutomesh (p = 0.022). No significant difference between the two parietal repair groups was observed during the follow‐ups with respect to the criterion of pain (using a visual analog scale). There was a significant difference between the two parietal repair groups with regard to the number of days spent in intensive care unit, in favor of the Tutomesh technique (p = 0.010). The use of a Tutomesh bioprosthesis for hernia repair or postincisional hernia in a potentially contaminated workplace reduces the risk of short‐term recurrence without increasing overall comorbidity.