Copper and iron-induced oxidative damage in non-tumor bearing LEC rats

The copper and Iron status in the liver of non-tumor bearing Long-Evans Cinnamon (LEC) rats (average age 17 months) was investigated. A direct quantitation of loosely-bound copper and iron was also investigated by using a chelating agent, nitrilotriacetic acid (NTA-chelatable free copper and iron). Besides the total copper and iron contents, the level of NTA-chelatable free copper was also higher in LEC rats than In LEA rats (P<0.05). But for the free iron level there was no signiflcant difference between the two rat groups (P>0.05). The formation of thiobarbituric acid-reactive substances was higher In LEC rats than In LEA rats (P<0.01). The 4–hydroxy-2–nonenal (HNE)-modified proteins were also clearly demonstrated in LEC rat liver. The copper and iron which produced the most important effect In the process of oxidative damage in LEC rats could not be distinguished. Even though free copper, which could induce free radical injuries, was increased in LEC rats, neither tumor-induction nor preneo-plastic lesions in the experimental LEC rats were observed. Therefore it is speculated that the elevation of a free iron is another important factor. Copper and iron, both important translation metals In the body, may participate In the Induction of DNA damage and oncogenesls     

DNA prime followed by protein boost enhances neutralization and Th1 type immunity against FMDV

Prime-boost strategy has been exhibited its potency to enhance immune responses, which would be important to the success to develop a vaccine against the foot-and-mouth disease virus (FMDV). An eukaryotic expression construct encoding the FMDV capsid VP1 protein with a recombinant VP1 protein or a commercial FMDV vaccine were tested in the prime-boost strategy in mice and cattle trials. The levels of induced specific antibodies, T cell proliferations, and DTH activities were significantly higher in the prime-boost groups than in those vaccinated with DNA, protein or FMDV vaccine alone. More importantly, the levels of neutralizing antibodies in the former groups were significantly higher than others and could last for at least four months in cattle trials. This study suggests that the prime-boost strategy significantly improves the effective immunity and may provide a longer protection against FMDV infection.     

镍钛形状记忆合金血管内支架组织相容性实验研究

将锥形记忆合金支架分别植入６只猪右侧髂动脉。用以研究镍钛形状记忆合金血管内支架生物相容性，支架植入前入植入后８个月，观测动物血常规，肝肾功能以及毛发中镍钛元素含量，均无明显变化（Ｐ〉０．０５），支架植入后８个月处死动物，全身重要脏器（肝、脾、肾、肺、心、脑等）病理学检查结构正常，无淋巴细胞和单核细胞浸润，支架植入部位上游血管壁内膜光滑，内皮细胞结构正常，内弹力板完整，支架植入段为完整肉芽组织阻塞，     

Monte Carlo dose verification for intensity-modulated arc therapy

Intensity-modulated arc therapy (IMAT), a technique which combines beam rotation and dynamic multileaf collimation, has been implemented in our clinic. Dosimetric errors can be created by the inability of the planning system to accurately account for the effects of tissue inhomogeneities and physical characteristics of the multileaf collimator (MLC). The objective of this study is to explore the use of Monte Carlo (MC) simulation for IMAT dose verification. The BEAM/DOSXYZ Monte Carlo system was implemented to perform dose verification for the IMAT treatment. The implementation includes the simulation of the linac head/MLC (Elekta SL20), the conversion of patient CT images and beam arrangement for 3D dose calculation, the calculation of gantry rotation and leaf motion by a series of static beams and the development of software to automate the entire MC process. The MC calculations were verified by measurements for conventional beam settings. The agreement was within 2%. The IMAT dose distributions generated by a commercial forward planning system (RenderPlan. Elekta) were compared with those calculated by the MC package. For the cases studied, discrepancies of over 10% were found between the MC and the RenderPlan dose calculations. These discrepancies were due in part to the inaccurate dose calculation of the RenderPlan system. The computation time for the IMAT MC calculation was in the range of 20-80 min on 15 Pentium-Ill computers. The MC method was also useful in verifying the beam apertures used in the IMAT treatments.     

Pentasomy 8q in therapy-related myelodysplastic syndrome due to cyclophosphamide therapy for fibrosing alveolitis

Trisomy 8/8q is a common cytogenetic event in myelocytic malignancies, ranging from myelodysplastic syndrome (MDS) to acute myelocytic leukemia (AML) to blastic transformation of chronic myelocytic leukemia. Isochromosome 8q results in the same gene dosage effect. Duplication of i(8q), resulting in pentasomy 8q, has been reported only in two cases of AML. A patient with fibrosing alveolitis on prolonged cyclophosphamide treatment developed therapy-related MDS. Karyotyping, FISH, and CGH analysis showed a duplicated i(8q) among other complex abnormalities. The clinical features of 11 cases of myelocytic leukemia with pentasomy and hexasomy 8/8q were summarized. Compared with trisomy and tetrasomy 8, significant features included reduced median survival (90 days), treatment refractoriness (even with transplantation), monocytic differentiation, trilineage dysplasia, and radiation or toxin exposure. Increasing copy numbers of chromosome 8/8q may therefore be a marker of advanced leukemic evolution, exposure to toxins, underlying myelodysplasia, and an overall poor prognosis.     

Ionically crosslinked alginate hydrogels as scaffolds for tissue engineering: part 1. Structure, gelation rate and mechanical properties

Alginate gels have been used in both drug delivery and cell encapsulation applications in the bead form usually produced by dripping alginate solution into a CaCl2 bath. The major disadvantages to these systems are that the gelation rate is hard to control; the resulting structure is not uniform; and mechanically strong and complex-shaped 3-D structures are difficult to achieve. In this work controlled gelation rate was achieved with CaCO3-GDL and CaSO4-CaCO3-GDL systems, and homogeneous alginate gels were formulated as scaffolds with defined dimensions for tissue engineering applications. Gelation rate increased with increasing total calcium content, increasing proportion of CaSO4, increasing temperature and decreasing alginate concentration. Mechanical properties of the alginate gels were controlled by the compositional variables. Slower gelation systems generate more uniform and mechanically stronger gels than faster gelation systems. The compressive modulus and strength increased with alginate concentration, total calcium content, molecular weight and guluronic acid (G) content of the alginate. MC3T3-E1 osteoblastic cells were uniformly incorporated in the alginate gels and cultured in vitro. These results demonstrated how alginate gel and gel/cell systems could be formulated with controlled structure, gelation rate, and mechanical properties for tissue engineering and other biomedical applications.     

From rafts to crafts: membrane asymmetry in moving cells

Many important biological events, including the leukocyte-mediated immune response, wound repair, axon guidance and developmental patterning, involve persistent cell movement towards a directional signal, a process termed chemotaxis. Establishment of functional and spatial cell polarity is an absolute requirement for this response. We propose that redistribution of specific membrane microdomains, termed rafts, during cell migration is a pivotal step in achieving polarity. On the one hand, partitioning of molecules into rafts might help to localize proteins at the front or the rear of moving cells, and on the other hand, rafts might function as platforms for local activation and coordination of the signaling pathways involved in cell migration.