Comparison of Single and Dual Monitoring during Carotid Endarterectomy

We compared the rate of selective shunt and pattern of monitoring change between single and dual monitoring in patients undergoing carotid endarterectomy (CEA). A total of 121 patients underwent 128 consecutive CEA procedures. Excluding five procedures using internal shunts in a premeditated manner, we classified patients according to the monitoring: Group A (n = 72), patients with single somatosensory evoked potential (SSEP) monitoring; and Group B (n = 51), patients with dual SSEP and motor evoked potential (MEP). Among the 123 CEAs, an internal shunt was inserted in 12 procedures (9.8%) due to significant changes in monitoring (Group A 5.6%, Group B 15.7%, p = 0.07). The rate of shunt use was significantly higher in patients with the absence of contralateral proximal anterior cerebral artery (A1) on magnetic resonance angiography (MRA) than in patients with other types of MRA (p <0.001). Significant monitor changes were seen in 16 (12.5%) in both groups. In four of nine patients in Group B, SSEP and MEP changes were synchronized, and in the remaining five patients, a time lag was evident between SSEP and MEP changes. In conclusion, the rate of internal shunt use tended to be more frequent in patients with dual monitoring than in patients with single SSEP monitoring, but the difference was not significant. Contralateral A1 absence may predict the need for a shunt and care should be taken to monitor changes throughout the entire CEA procedure. Use of dual monitoring can capture ischemic changes due to the complementary relationship, and may reduce the rate of false-negative monitor changes during CEA.     

A Novel HR-pQCT Image Registration Approach Reveals Sex-Specific Changes in Cortical Bone Retraction With Aging

During aging, changes in endosteal and periosteal boundaries of cortical bone occur that differ between men and women. We here develop a new procedure that uses high-resolution peripheral quantitative CT (HR-pQCT) imaging and 3D registration to identify such changes within the timescale of longitudinal studies. A first goal was to test the sensitivity of the approach. A second goal was to assess differences in periosteal/endosteal expansion over time between men and women. Rigid 3D registration was used to transform baseline and all follow-up (FU) images to a common reference configuration for which the region consisting of complete slices (largest common height) was determined. Periosteal and endosteal contours were transformed to the reference position to determine the net periosteal and endosteal expansion distances. To test the sensitivity, images from a short-term reproducibility study were used (15 female, aged 21 to 47 years, scanned three times). To test differences between men and women, images from a subset of the Geneva Retirees Cohort were used (248 female, 61 male, average age 65 years, 3.5 and 7 years FU). The sensitivity study indicated a least significant change for detecting periosteal/endosteal expansion of 41/31 microns for the radius and 17/26 microns for the tibia. Results of the cohort study showed significant net endosteal retraction only in females at the radius and tibia after 3.5 years (38.0 and 38.4 microns, respectively) that further increased at 7 years FU (70.4 and 70.8 microns, respectively). No significant net periosteal changes were found for males or females at 7 years. The results demonstrate that it is possible to measure changes in endosteal contours in longitudinal studies within several years. For the investigated cohort, significant endosteal retraction was found in females but not in males. Whether these changes in cortical geometry are related to fracture risk remains to be investigated in larger cohorts © 2021 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).     

Misaligned spinal rods can induce high internal forces consistent with those observed to cause screw pullout and disc degeneration

BACKGROUND CONTEXTManual contouring of spinal rods is often required intraoperatively for proper alignment of the rods within the pedicle screw heads. Residual misalignments are frequently reduced by using dedicated reduction devices. The forces exerted by these devices, however, are uncontrolled and may lead to excessive reaction forces. As a consequence, screw pullout might be provoked and surrounding tissue may experience unfavorable biomechanical loads. The corresponding loads and induced tissue deformations are however not well identified. Additionally, whether the forced reduction alters the biomechanical behavior of the lumbar spine during physiological movements postoperatively, remains unexplored.PURPOSETo predict whether the reduction of misaligned posterior instrumentation might result in clinical complications directly after reduction and during a subsequent physiological flexion movement.STUDY DESIGNFinite element analysis.METHODSA patient-specific, total lumbar (L1–S1) spine finite element model was available from previous research. The model consists of poro-elastic intervertebral discs with Pfirrmann grade-dependent material parameters, with linear elastic bone tissue with stiffness values related to the local bone density, and with the seven major ligaments per spinal motion segment described as nonlinear materials. Titanium instrumentation was implemented in this model to simulate a L4, L5, and S1 posterolateral fusion. Next, coronal and sagittal misalignments of 6 mm each were introduced between the rod and the screw head at L4. These misalignments were computationally reduced and a physiological flexion movement of 15° was prescribed. Non-instrumented and well-aligned instrumented models were used as control groups.RESULTSPulling forces up to 1.0 kN were required to correct the induced misalignments of 6 mm. These forces affected the posture of the total lumbar spine, as motion segments were predicted to rotate up to 3 degrees and rotations propagated proximally to and even affect the L1–2 level. The facet contact pressures in the corrected misaligned models were asymmetrical suggesting non-physiological joint loading in the misaligned models. In addition, the discs and vertebrae experienced abnormally high forces as a result of the correction procedure. These effects were more pronounced after a 15° flexion movement following forced reduction.CONCLUSIONSThe results of this study indicate that the correction of misaligned posterior instrumentation can result in high forces at the screws consistent with those reported to cause screw pullout, and may cause high-tissue strains in adjacent and downstream spinal segments.CLINICAL SIGNIFICANCEProper alignment of spinal posterior instrumentation may reduce clinical complications secondary to unfavorable biomechanics.     

Contribution of computed tomography in the diagnosis of symptomatic epilepsy

The aim of this retrospective study was to document the various causes of epilepsy determined by computed tomography (CT). We studied 205 CT scans carried out in patients with symptomatic epilepsy. We identified 52 (25.36%) pathological causes: 18 cases (34.62%) of infectious lesions, predominantly toxoplasmosis, 9 cases (17.30%) of tumors, 9 cases (17.30%) of vascular lesions and 8 cases (15.39%) of post-traumatic and atrophic lesions. CT is of great value in the diagnosis of epilepsy, not only in the assessment of the disease, but also for identifying the lesion responsible for the seizures, which may be treatable. It is advisable to carry out a CT scan for any patient presenting with symptomatic epilepsy.     

Insertion of the patella tendon after prosthetic replacement of the proximal tibia

We describe the technique and the results of a method to reconstruct the patellar tendon insertion to a tumor prosthesis by wrapping an artificial mesh around the prosthesis, followed by suturing the patellar tendon and a gastrocnemius flap to the mesh.     

Sensory Ataxic Guillain-Barré Syndrome with Dysgeusia after mRNA COVID-19 Vaccination

Guillain-Barré syndrome (GBS) has occasionally occurred in people who have received coronavirus disease 2019 (COVID-19) vaccines. Dysgeusia is rare symptom of GBS. We herein report a rare case of sensory ataxic GBS with dysgeusia just after the second dose of the Pfizer-BioNTech COVID-19 vaccine. Although autoantibodies against glycolipids were not detected, immunotherapy with intravenous immunoglobulin and methylprednisolone pulse therapy effectively ameliorated the symptoms. Our report suggests that the COVID-19 vaccine may induce various clinical subtypes of GBS, including a rare variant with sensory ataxia and dysgeusia.     

Precise immunological evaluation rationalizes the design of a self-adjuvanting vaccine composed of glycan antigen,TLR1/2 ligand,and T-helper cell epitope

Sialyl-Tn (STn), overexpressed on various tumors, has been investigated for its application in anti-cancer vaccine therapy. However, Theratope, an STn-based vaccine, failed in the phase III clinical trial due to poor immunogenicity and epitope suppression by the foreign carrier protein. We therefore developed a self-adjuvanting STn based-vaccine, a conjugate of clustered STn (triSTn) antigen, TLR1/2 ligand (Pam₃CSK₄), and T-helper (Th) cell epitope, and found that this three-component self-adjuvanting vaccine effectively resulted in the production of anti-triSTn IgG antibodies. We herein analyzed immune responses induced by this self-adjuvanting vaccine in detail. We newly synthesized two-component vaccines, i.e., Pam₃CSK₄- or Th epitope-conjugated triSTn, as references to evaluate the immune-stimulating functions of Pam₃CSK₄ and Th epitope. Immunological evaluation of the synthesized vaccine candidates revealed that Pam₃CSK₄ was essential for antibody production, indicating that the uptake of triSTn antigen by antigen-presenting cells (APCs) was promoted by the recognition of Pam₃CSK₄ by TLR1/2. The function of the Th epitope was also confirmed. Th cell activation was important for boosting antibody production and IgG subclass switching. Furthermore, flow cytometric analyses of immune cells, including T cells, B cells, dendritic cells, and other monocytes, were first employed in the evaluation of self-adjuvanting vaccines and revealed that the three-component vaccine was able to induce antigen-specific immune responses for efficient antibody production without excessive inflammatory responses. Importantly, the co-administration of Freund''s adjuvants was suggested to cause excessive myeloid cell accumulation and decreased plasma cell differentiation. These results demonstrate that vaccines can be designed to achieve the desired immune responses via the bottom-up construction of each immune element.

Detailed analysis of a three-component self-adjuvanting vaccine revealed that conjugate vaccines can be designed to achieve the desired immune responses via bottom-up construction of the necessary immune elements.