Effects of whole body hyperthermia (41.8 degrees C) on the frequency of tumor cells in the peripheral blood of patients with advanced malignancies.

PURPOSE: Combining heat with antineoplastic drugs has produced evidence of antitumor synergism. An increasing number of trials are investigating whole body hyperthermia (WBH) in combination with chemotherapy in patients with advanced malignancies. Here we investigated whether the hyperdynamic state of the circulation as a consequence of WBH may stimulate dissemination of malignant cells. EXPERIMENTAL DESIGN: WBH in combination with chemotherapy was administered by a radiant heat device to 20 consecutive patients with advanced epithelial malignancies. One WBH session lasted for approximately 4 h (90 min heating time, 60 min plateau at 41.8 degrees C, and 60-80 min cooling). Peripheral blood was drawn before WBH treatment (baseline), at the end of the plateau (1 h), and 24 h and 48 h thereafter. After removal of leukocytes using anti-CD45 magnetic beads, circulating tumor cells were detected immunocytochemically using the monoclonal antibody A45-B/B3, which binds to a common epitope present on various cytokeratins. RESULTS: The method used to detect tumor cells in the peripheral blood proved to be specific and very sensitive (detection limit 1 tumor cell per 1.7 x 10(5) peripheral blood mononuclear cell). Before WBH, 6 of 20 patients had cyto-keratin-positive cells in their blood. A treatment-induced increase in the number of circulating tumor cells became statistically significant at 24 h after WBH (P = 0.043) and was detected in a total of 9 patients, 5 of whom had no detectable malignant cells at baseline. There was no evidence of a correlation between an increase in the number of circulating tumor cells and increased metastasis frequency. CONCLUSIONS: Our findings suggest that WBH might induce a temporary release of tumor cells into the circulation, but this spread appears to be clinically not significant in patients with advanced malignancies.     

Expression of CEACAM6 in resectable colorectal cancer: a factor of independent prognostic significance.

PURPOSE: CEACAM6, CEACAM1, and human carcinoembryonic antigen (CEA) are coexpressed in normal colorectal epithelia, but show deregulated expression in colorectal cancers (CRC). Upregulation of CEACAM6 expression in hyperplastic polyps and early adenomas represents one of the earliest observable molecular events leading to colorectal tumors. The aim of our study was to evaluate the prognostic relevance of CEACAM6, CEACAM1, and CEA tissue expression in patients with CRC. PATIENTS AND METHODS: Immunohistochemical analysis was carried out on tissue microarrays from 243 paraffin-embedded biopsies from a randomized controlled clinical trial (Swiss Group for Clinical Cancer Research [SAKK] 40/81) of adjuvant fluorouracil-based chemotherapy with CEACAM-specific monoclonal antibodies. The median follow-up was 8 years. Overall survival (OS) and disease-free survival (DFS) were calculated using Kaplan-Meier estimates and hazard ratios (HRs) estimated using Cox proportional hazards models. RESULTS: Tissue expression of CEACAM6, CEACAM1, and CEA was enhanced in 55%, 58%, and 94% of patients, respectively. Multivariate Cox analysis including sex, age, tumor site, stage, differentiation grade, treatment, and nodal status as covariates showed that CEACAM6 overexpression independently predicted poor OS (HR, 1.86; P =.0100) and DFS (HR, 2.00; P =.0028), whereas CEACAM1 or CEA were not significantly related to these outcomes. The data did not provide evidence for or against the hypothesis that the CEACAM6 effect on survival differs according to treatment. CONCLUSION: Expression of the cell adhesion molecule CEACAM6 in CRC is an independent prognostic factor allowing subdivision of patients into low- and high-risk groups. Whether CEACAM6 or CEA and CEACAM1 might be useful as predictive markers of chemotherapy benefit remains unclear.     

Research strategies for safety evaluation of nanomaterials, part V: role of dissolution in biological fate and effects of nanoscale particles.

Dissolution, translocation, and disposition have been shown to play a key role in the fate and effects of inhaled particles and fibers. Concepts that have been applied in the micron size range may be usefully applied to the nanoscale range, but new challenges are presented based on the small size and possible change in the dissolution:translocation relationship. The size of the component molecule itself may be on the nanoscale. Solute concentration, surface area, surface morphology, surface energy, dissolution layer properties, adsorbing species, and aggregation are relevant parameters in considering dissolution at the nanoscale. With regard to the etiopathology caused by these types of particulates, the metrics of dose (particle number, surface area, mass or shape) is not yet well defined. Analytical procedures for assessing dissolution and translocation include chemical assay and particle characterization. Leaching of substituents from particle surfaces may also be important. Compartmentalization within the respiratory tract may add another dimension of complexity. Dissolution may be a critical step for some nanoscale materials in determining fate in the environment and within the body. This review, combining aspects of particle toxicology, material science, and analytical chemistry, is intended to provide a useful basis for developing relevant dissolution assay(s) for nanoscale particles.     

Evaluation of Tableting and Tablet Properties of Kollidon SR: The Influence of Moisture and Mixtures with Theophylline Monohydrate

The aim of the study was firstly to investigate the influence of moisture on the tableting and tablet properties of Kollidon SR and secondly to investigate the influence of theophylline monohydrate on the tableting behavior and tablet properties produced from binary mixtures with Kollidon SR. In comparison to Kollidon SR, microcrystalline cellulose (MCC) was used. The glass transition temperature (T_g) of the powder over the whole range of RH (0–90%), and in addition, the T_g of tablets of Kollidon SR were measured. Densities and flowability of the powders were analyzed. The tablets were produced at five different maximum relative densities (ρ_{rel, max}) on an instrumented eccentric tableting machine. They were produced at three different relative humidities (RH), 30%, 45%, and 60% RH for the pure substances and binary mixtures with different ratios of drug and excipient were tableted at 45% RH. The tableting properties were analyzed by 3D modeling, force-displacement profiles, and compactibility plots. First, the T_g of the powder decreased with increasing RH and the T_g of the tablet was 4–8 K lower than the powder. The predominant deformation of Kollidon SR is plastic deformation and Kollidon SR showed a higher compactibility than MCC. The parameters of the 3D model showed an extreme change between 45 and 60% RH, and at higher RH more and more particles deformed elastically. This was confirmed by analysis of force-displacement profiles. At 60% RH, the radial tensile strength of the Kollidon SR tablets was half of the radial tensile strength at 45% RH. The reason is a higher relative energy of plastic deformation than for MCC. This results in a better utilization of the energy to deform the powder into a tablet and the exceeding of the glass transition temperature at higher RH. In conclusion, at 60% RH at the same ρ_{rel, max}, tableting and tablet properties of Kollidon SR are extremely changed since plasticity is significantly higher. In the second part of the study, the insufficient flowability of theophylline monohydrate can be compensated by using Kollidon SR in a mixture with up to 20% theophylline. Further, pressure plasticity ε of MCC and Kollidon SR was lowered in the mixture with theophylline monohydrate. The same is valid for the compactibility. The influence of theophylline monohydrate on the pressure plasticity e of the mixtures was better compensated in the mixture with MCC than in a mixture with Kollidon SR. This compensation was also visible by analyzing the force-displacement-profiles. However, hardly any influence on the radial tensile strength could be detected. Kollidon SR and Kollidon SR mixtures exhibited a higher compactibility than MCC and MCC mixtures. The differences became smaller with increasing theophylline content.     

Circulating levels of MCP-1 are increased in women with gestational diabetes

OBJECTIVE: We investigated whether gestational diabetes mellitus is associated with monocyte-chemoattractant-protein-1 (MCP-1) and soluble CD40 ligand (sCD40L), the functional relevant proteins in the inflammatory process. METHODS: In all 32 women with gestational diabetes mellitus, 18 women without gestational diabetes mellitus and 40 nonpregnant women were included. MCP-1 and sCD40L were measured at the time of the oral glucose tolerance test (second trimester), in the third trimester and postpartum. RESULTS: MCP-1 was higher in pregnant women (women with gestational diabetes mellitus and without) than in nonpregnant women (p < 0.001) in the third trimester, and also in the second trimester and postpartum. MCP-1 was elevated in patients with gestational diabetes mellitus in the third trimester compared to healthy pregnant women (p = 0.007). In gestational diabetes mellitus, MCP-1 increased from the second to the third trimester (p = 0.003). We found no association of sCD40L and gestational diabetes mellitus. CONCLUSION: The elevation of MCP-1 in the third trimester in gestational diabetes mellitus suggests an association between inflammation and GDM. Copyright (c) 2008 John Wiley & Sons, Ltd.     

Analysis of Mechanical Properties Related to Fiber Length of Closed-Loop-Recycled Offcuts of a Thermoplastic Fiber Composites (Organo Sheets)

Increasing demand for energy-efficient means of transport has steadily intensified the trend towards lightweight components. Thermoplastic glass fiber composites (organo sheets) play a major role in the production of functional automotive components. Organo sheets are cut, shaped and functionalized by injection molding to produce hybrid components, such as those used in car door modules. The cutting process produces a considerable amount of production waste, which has thus far been thermally recycled. This study develops a closed mechanical recycling process and analyzes the different steps of the process. The offcuts were shredded using two shredding methods and implemented directly in the injection-molding process. Using tensile tests and impact bending tests, the material properties of the recycled materials were compared with the virgin material. In addition, fiber length degradation via the injection-molding process and the influence of the waterjet-cutting process on the mechanical properties are investigated. Recycled offcuts are both comparable to new material in terms of mechanical properties and usability, and are also economically and ecologically advantageous. Recycling polypropylene waste with glass fiber reinforcement in a closed loop is an effective way to reduce industrial waste in a sustainable and economical production process.